PRO ELEC PLPL15330PL Switched and Surge Protected Extension Lead User Manual
- June 14, 2024
- PRO ELEC
Table of Contents
SURGE PROTECTED SWITCHED
EXTENSION LEAD
IMPORTANT SAFETY INFORMATION
- The cable must be fully unwound before use.
- Avoid use in damp conditions.
- For indoor use only.
- Do not remove the 13a plug and connect directly to a mains supply.
- Do not exceed the total maximum load across all sockets of 13A / 3120W.
Note: This is not a lightning strike arrester.
OPERATION
- Surge protection is used to protect voltage sensitive devices such as computers from power surge fluctuations caused by electrical equipment connected to the same mains supply circuit.
- Connect the 13A plug to a mains socket.
- Connect the devices you require to power to the outlet sockets and turn on the power using the switch next to each socket which will illuminate to indicate the socket is live.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC
EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste
Electrical & Electronic Equipment (WEEE). Any WEEE marked products must not be
mixed with general household waste, but kept separate for the treatment,
recovery and recycling of the materials used. Contact your local authority for
details of recycling schemes in your area.
** Made in China
PO Box 13362 Dublin 2
PR2 9PP**
Documents / Resources
| PRO
ELEC PLPL15330PL Switched and Surge Protected Extension
Lead
[pdf] User Manual
PLPL15330PL, PELB1942, PLPL15330PL Switched and Surge Protected Extension
Lead, PLPL15330PL, Switched and Surge Protected Extension Lead, and Surge
Protected Extension Lead, Protected Extension Lead, Extension Lead, Lead
---|---