Pyle PWMA1225BT Portable Bluetooth Karaoke Loudspeaker Instruction Guide
- June 4, 2024
- Pyle
Table of Contents
Pyle PWMA1225BT Portable Bluetooth Karaoke Loudspeaker
Introduction
Pyle Bluetooth Speaker is your next event will have powerful sound and graphics thanks to this small, portable system that is easy to set up. You may connect and stream audio from any Bluetooth-compatible device, including smartphones, tablets, computers, and more, using Bluetooth music streaming.
Feature
- Stylish, Fashionable and Elegant Appearance
- Strong bass , Clear and Rich Vocal
- Designed with Patented Soft Metal Technology , Anti-scratch outer shell and Wooden inner box
- Music playing through BT , USB , Micro SD and Line in connection.
Display Description
-
Stop lighting when reading USB or Micro SD data; muting when line in or FM mode.
- USB/Micro SD: Lighting when playing in USB or Micro SD.
-
Repeat Single Repeat
-
88:88 ” LINE IN” when operating in Line in mode; ” FM Frequency “when operating in FM mode; “Time” when operating in USB & Micro SD mode ” BT” when operating in BT mode .
-
Low Charging Flashing when the power is low, charging is needed.
Panel Function
- Speaker Volume Control Dial
- Guitar Volume Control Dial
- Microphone Volume Control Dial
- Echo Function Control Dial (Microphone Only)
- Micro SD Card Slot
- USB Input Port
- Line-in AuxPort
- Microphone Input Jack
- Guitar Input Jaka5 Band Equalizer Sliders
- Rec Mic
- Battery Indicator Light
- Mode Button
- Mic Volume Control Dial
- Rec
- Repeat Button
- Skip – Button
- Play/Pause Button
- Skip + Button
Volume Adjust
- Master Volume: Turning to adjust master volume.
- Treble Volume : Turning to adjust volume.
- Echo Effect Volume : Turning to adjust volume.
- Mic Volume: Turning to adjust volume.
- Mode : Change to other mode when operating ,sequence:
- LINE IN-USB-Micro SD-BT-FM . Priority to play in USB or Micro SD mode when insert the USB or Micro SD.
Usb Insert
- USB: Playing when insert the USB which save with MP3 music.
- Micro SD: Playing when insert the Micro SD which save with MP3 music.
- Line in: Playing when plug in the Line in cable and connected with music device.
- Play/Pause Button: In USB or Micro SD mode, press to play or pause, in Line in mode ,press to mute.
- Skip -&+ Button: While playing music in USB or Micro SD mode, short press to go back or forward music
- Press the “Record ” Button 2S to get into the recording mode after insert USB or Micro SD , the speaker is built in mic receiver , press “Record” button again to play the records after recorded .
Bluetooth
- Pairing : Press mode button to Bluetooth mode , speaker will be under automatic pairing mode, LED display shows “BT” , pair the Bluetooth compatible device by selecting “PWMA1225BT” from the listed devices, speaker will call out “Connected” after paired successful, Bluetooth pairing system will be off if there is no device connecting after 5 minutes .
- Music Playing : Press Play/Pause , Skip + / – Button to play music . Microphone VIP : While music playing and pluged microphone , it will enlarge the voice received from mic and lower the music volume after pressed Microphone VIP button . Music volume will go back orginally if there is voice received from microphone , press Microphone VIP button again to cancel the function . This product matched with external 12V storage battery connecting clamp, pis according to red {+),black{-lto connect the external storage battery ‘s ( +) , ( -) . normal working after opening the power supply.
Battery Volume And Charging Indication
- I .There are four green lights as battery level indicator : The first green light from right to left shows the power lower to 20%;The second green light shows the power lower to 40%,and the third green light shows the power lower to 80%, the fourth green light shows full power.
- When the last green light flashing in battery level indicator , it need to be charged,
Remarks Please charging the speaker when power off or lower the volume to avoid sound distortion.
Warning
- Don’t put this product under high temperature and wet environment and it will be worse when it is in the rain or crashed strongly.
- Please don’t feel free to open the back cover, in case suffering from electric shock or any other accidents.
- If it needs to be fixed, please contact with our professional maintenance staff and ask them to deal with it
- If fragments or liquids fall into device box, please cut off the power right away. And it can be used after professional staff checks it
- When the device is not used, please turn the power off and pull out power plug.
- Device cannot get wet, and the things filled with liquids such as flower vase should not be put on the top of it
- If the battery is incorrectly replaced then explosion would happen, so please replace it with the same type or equivalent type of battery.
Specifications
Packing
- PWMA1225BT Speaker 1
- Power Line 1
- User Manual 1
- Wireless Microphone 1
- Wireless Headman 1
Frequently Asked Questions
How many watts?
60 Watts
How long does the battery last?
I haven’t used it w/ a full battery and measured the amount of time required for a ‘full charge’ to dissipate given a specific volume level constantly, but I’ve been pleasantly surprised that it’s lasted as long as it has. I would say at least an hour…
I purchased this and don’t know how to get the wireless headset working?
The transmitter will automatically connect to the unit once you power it on. Please make sure the headset is properly and securely connected to the unit. If the troubleshooting didn’t work kindly call our Technical Support Department at 718 535 1800 Press 2 then 1 from Monday to Friday 9 AM to 5 PM EST.
How many watts it have?
Hi, it is 600 watts.
How far does the wireless headset work up to?
The wireless microphone of this PWMA1225BT can run up to 90 ft depending on the location and materials on the location.
What make or number micro SD card do you use in the Pyle pwma1225BT?
The unit can handle up to 32 GB.
How do I restart my Bluetooth karaoke microphone?
To start normally, hold down the POWER BUTTON for 2 seconds; to reset Bluetooth, hold down the POWER BUTTON for 5 seconds. Press the POWER BUTTON for 2 seconds to turn off the microphone when it is turned on. When the microphone is turned on, the search pairing mode is automatically activated.
How can I hook up my Bluetooth speakers to my karaoke system?
Simply switch on the Bluetooth discovery setting on your karaoke machine, then go to the settings on your phone, select Bluetooth, then connections, and then hit search for device. You can then press it to pair the two devices after your karaoke machine appears.
Why doesn’t the karaoke microphone work?
Both the receiver and the microphone’s 9V batteries need to be changed. Be sure to turn up the volume. Turn off all devices, remove the receiver’s plug, and then replace it, making sure the plug is securely fastened. The karaoke machine should then be turned on after turning on the receiver and microphone.
How can I link my phone to my karaoke microphone?
Utilizing a micro-USB connection (for Android) or lights is the first approach you can take (Apple). If your microphone is USB compatible, all you have to do is plug the USB connector into the mic and the other end into the phone’s charging port.
Why doesn’t my wireless microphone function?
Changing the battery or moving the microphone closer to the receiver are frequently the simplest solutions for dealing with static. Move the receivers to a location backstage or onstage to get the mic closer to the receiver. There is already cable running from many venues’ backstage or onstage sections to their tech booths.
Why won’t my Bluetooth activate?
When Android Bluetooth stops working, you may occasionally only need to restart the device; this is especially true if it has been on for a while. So, all you have to do is toggle the Bluetooth connection on and off. The Bluetooth symbol will be visible; tap it to turn it off. To turn it on, tap it once more.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>