OMCAN MX-CN-0010-G Baking Mixers

Product Information

Specifications

• Models: MX-CN-0020-G, MX-CN-0020-T, MX-CN-0030-G, MX-CN-0030-T, MX-CN-0010-G
• Items: 20467, 20441, 17835, 20442, 17836

General Information

Before operating any equipment, always read and familiarize yourself with all operation and safety instructions.

Safety and Warranty

• RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.
• 1 YEAR PARTS AND LABOUR WARRANTY
• Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized service technician to repair the equipment locally. Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use. Please see https://omcan.com/disclaimer for complete info.
• WARNING: The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty. In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms. DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

1. Gear change hand lever
2. Planetary Shaft
3. Mixer Attachment
4. Stainless bowl
5. Power switch
6. Bowl lift handle
7. Safety guard
8. Support Frame

9. 12 Hub

10. Internal Safety Switch
11. Safety Switch
12. Overload Reset Button

Usage Instructions

Installation
Refer to the installation section in the user manual for detailed instructions on how to install the baking mixer.

Operation
Follow these steps to operate the baking mixer:

1. Ensure that the power switch is in the “off” position.
2. Attach the desired mixer attachment to the planetary shaft.
3. Lift the stainless bowl using the bowl lift handle.
4. Add ingredients to the bowl.
5. Lower the bowl and secure it in place.
6. Turn on the power switch to start the mixer.
7. Adjust the gear change hand lever to the desired speed.
8. Monitor the mixing process and make any necessary adjustments.
9. Once mixing is complete, turn off the power switch and unplug the baking mixer from the power source.

Maintenance
Refer to the maintenance section in the user manual for detailed instructions on how to properly maintain and clean the baking mixer.

Troubleshooting
If you encounter any issues with the baking mixer, refer to the troubleshooting section in the user manual for possible solutions.

Frequently Asked Questions (FAQ)

• Can I use this baking mixer in a residential kitchen?
  The vendor does not provide warranty coverage for non-commercial or residential usage. It is recommended to check with the vendor or refer to the safety and warranty section in the user manual for more information.

• What does the warranty cover?
  The warranty covers electrical and part failures within the specified warranty period. Improper use or unauthorized maintenance will void the warranty. Please refer to the safety and warranty section in the user manual for complete information.

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

• Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party.
• Before operating any equipment, always read and familiarize yourself with all operation and safety instructions.
• Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also save the original box and packaging for shipping the equipment if servicing or returning of the machine is required.

Safety and Warranty

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

• Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized service technician to repair the equipment locally.
• Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not improper use.
• Please see https://omcan.com/disclaimer for complete info.

WARNING:

• The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty.
• In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms.
• DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

1. Gear change hand lever.
2. Planetary Shaft.
3. Mixer Attachment.
4. Stainless bowl.
5. Power switch.
6. Bowl lift handle.
7. Safety guard.
8. Support Frame.

9. 12 Hub

10. Internal Safety Switch
11. Safety Switch
12. Overload Reset Button

Technical Specifications

Installation

UNCRATING
Immediately after uncrating the mixer, check for possible shipping damage. If the machine is found to be damaged after uncrating, save all packaging materials and contact the carrier within 3 days of delivery. Failure to contact the carrier or supplier in a timely fashion may cause you a loss.

LOCATION
Prior to installation, test the electrical service to assure that it agrees with the specifications on the machine’s rating plate. Place the mixer on a sturdy and level surface. There should be adequate space around the mixer for the user to operate the controls and to install and remove the bowls. Holes are located in the base to permanently secure the mixer, although this is not necessary in normal installations.

ELECTRICAL CONNECTIONS
The electrical cords on these machines are equipped with a three-pronged grounding plug, which must be connected to a properly grounded receptacle. If the receptacle is not properly grounded, contact an electrician. DO NOT remove the grounding prong from the plug. Electrical and grounding connections must comply with the applicable regulations and local electrical codes.

Check Initial Operation

1. Install the bowl and raise into the mix position, with the bowl support up and bowl safety guard closed.
2. Apply power to the mixer by inserting the cord plug into a properly grounded outlet.
3. Turn the Speed Lever to position 1.
4. Run the machine by pushing the START and then the STOP buttons.

Operation

WARNING
Moving agitator in bowl. Keep hands, clothing and utensils out of bowl while in operation. Do not use without interlocked safety guard.
WARNING: DO NOT SWITCH GEARS DURING USAGE.
The Omcan mixers are equipped with Standard Safety features. Refer to the diagram on page 3 for an explanation of their functions. The bowl safety guard must be in the closed position or the mixer will not operate. The bowl must be raised and remain in mixing position on bowl support or the mixer will not operate.

1. Standard power supply 110V / 60Hz AC. (Please use a plug with 3 wide contacts and good grounding.)
2. Speed transformation: if you want to change the speed, please turn off the power switch (5) first, and then pull the gear change hand lever (1) to the position required.
3. Shutting down: when the operation is completed, turn off the power switch (5) first, then pull the gear change hand lever (1) to position 1, and lower bowl to load position (6), and finally disconnect the power supply.

NOTES

• The power socket must be provided with a good ground wire to guarantee the mixer is grounded properly. There will be an electric shock if there is no ground wire or if it is improperly mounted. Never connect the ground wire to gas pipes, water pipes, lightning rods or telephone lines. Electric leakage should be checked after installation. If the power line is damaged, it must be replaced by the a Service Company.
• Do not put your hand into the stirring barrel during operation. Disconnect the power supply before the installation of the mixer.
• Do not operate the mixer beyond the time limit to prevent reduction of its service life.
• The mixer should be mounted on a stable and clean place, keep it away from heat sources and wet places, and away from equipment with strong electromagnetic properties.
• Keep the machine clean constantly. Disconnect power supply before maintenance. Clean machine with a soft damp cloth. Do not clean it with water spray or use harsh detergents.

On/Off Switch

• MX-CN-0010-G

1. Standard Controls

• MX-CN-0020-T

1. On Button
2. Off Button
3. Countdown Timer Knob

• MX-CN-0020-G

1. On Button
2. Off Button

• MX-CN-0030-T

1. Separate On and Off Switches
2. Countdown Timer Knob
3. Speed Adjusting Lever with Handle

• MX-CN-0030-G

1. On Button
2. Off Button
3. Speed Adjusting Lever with Handle

Installing Mixer Bowls – All Models

1. Place the bowl on the two arms to keep it in place. Insert the bowl pin into pin support located on frame. Carefully align holes on the bowl with the studs on the bowl arms. (Fig.1)
2. Once the bowl is seated properly, swing the locking levers into position. (Fig.2)
3. To remove the bowl, follow the instructions above in reverse order.

Installing Mixer Attachments – MX-CN-0010-G
Ensure machine is off, lower bowl to loading position. Keep note of the notch on the shaft (Fig.3) and raise the attachment over the shaft. (Fig.4) Turn the attachment to the left until you can turn no more (Fig.5) and release, the attachment should now dip down a bit and lock in place. To Remove the attachment, follow the instructions above in reverse order.

Installing Mixer Attachments – MX-CN-0020-T / MX-CN-0020-G
Ensure machine is off, lower bowl to loading position. Open the Guard by pulling the handle away from the magnetic latch. (Fig.6) Raise the attachment over the shaft, keeping note of where the notch is. (Fig.7) Guide the notch through the path until it reaches the end and locks. (Fig.8) To remove attachment, follow the instructions above in reverse order.

Installing Mixer Attachments – MX-CN-0030-T / MX-CN-0030-G
Ensure machine is off, lower bowl to loading position. Open the Guard by lifting it up towards the top of the machine until it stops. (Fig.9) Raise the attachment through the shaft, keeping note of where the notch is. (Fig.7) Guide the notch through the path until it reaches the end and locks. (Fig.8) To remove attachment, follow the instructions above in reverse order.

Maintenance

Clean the bowl and attachments daily or after use to maintain hygiene standards. Clean the mixer with a soft wet cloth. The transmission gear box is greased in factory. Check the greasing each 6 months. To add or refill grease, open the top cover, then fill grease from aperture or replace the grease directly. Ensure guide rails are kept clean and lubricated.

Troubleshooting

WARNING!
If the equipment is out of function, please make sure it is serviced by a professional person. Please turn to a special service centre!

Mixer Capacity Chart

pts – Pints (US Liquid)
The following maximum capacities are intended as a guideline only, varying factors such as the type of flour used, temperature of water used, and other conditions may require the batch to be reduced. (1 gallon of water weighs 8.33 lbs.)
NOTE: AR% = (Absorption Ratio % – water weight divided by flour weight) The mixer capacity depends on the moisture content of the dough. The capacities mentioned above are based on flour at room temperature and 70°F water temperature. If high gluten flour is used, reduce above dough batch size to 10% If using chilled flour, water below 70°F, or ice, reduce batch size by 10% 2nd speed should never be used on 50% AR

Parts Breakdown

• **Model MX-CN-0010-G 20467

**

• Model MX-CN-0020-G 20441
• **Model MX-CN-0020-T 17835

**

• Model MX-CN-0030-G 20442
• **Model MX-CN-0030-T 17836

**

Electrical Schematics

• **Model MX-CN-0010-G 20467

**

• **Model MX-CN-0020-G 20441

**

• **Model MX-CN-0020-T 17835

**

• **Model MX-CN-0030-G 20442

**

• **Model MX-CN-0030-T 17836

**

• Model MX-CN-0020-G 20441
• Model MX-CN-0020-T 17835
• Model MX-CN-0030-G 20442
• **Model MX-CN-0030-T 17836

**

Warranty Registration

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: https://omcan.com/warranty-registration/

• For mailing in Canada

  • OMCAN
  • PRODUCT WARRANTY REGISTRATION 3115 Pepper Mill Court, Mississauga, Ontario
  • Canada, L5L 4X5

• For mailing in the US

  • OMCAN
  • PRODUCT WARRANTY REGISTRATION 4450 Witmer Industrial Estates, Unit 4, Niagara Falls, New York
  • USA, 14305

• email to: service@omcan.com

• Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 6,500 globally sourced products.

References

• Omcan
• Disclaimer – Omcan
• Warranty Registration – Omcan

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>