ETOE D2 Pro Android TV Mini Projector User Guide
- June 14, 2024
- ETOE
Table of Contents
D2 Pro Android TV Mini Projector
User Guide
D2 Pro Android TV Mini Projector
Firmware Upgrade
Check the Necessity of Firmware Upgrade
How to upgrade firmware?
Introducing our new V2.09.22 firmware
Check the Necessity of Firmware Upgrade
- Turn on the projector and go to HomePage>Settings>About;
- Check the version number on “System Version”;
- The newest firmware version begins with V2.09.22;
- If the version is not the same as the newest one, it is recommended to update to the newest one.
How to upgrade firmware?
-
Please download the firmware on rar version and unzip it. You will get a software named “MstarUpgrade”. Or just download the bin file directly, which might take a longer download time.
Rar Version: Digital Downloads (shopifyapps.com) ↓
Bin Version: Digital Downloads (shopifyapps.com) ↓ -
Copy “MstarUpgrade” to the root file of your USB flash drive.
Note
Do not change the firmware’s file name. If the file name is changed, the firmware update will not start. -
Plug the USB flash drive into the USB port of the projector.
Before starting the update
Disconnect the power cord from the projector and check that all of the indicators on the projector are off.
-
Plug in the power cord of the projector.
-
Press and hold the power button on top of the projector until the upgrade progress bar (with blue background) appear on the screen.
-
Wait till the upgrade is done, and the projection will restart automatically.
⚠ Note
Do not disconnect the power cord from the projector while the firmware is updating.
If the power is disconnected, the projector may not start correctly. -
Check the result of the update.
a. Click on the menu of the projector with the remote;
b. Click on “Setting”, and then choose “About”;
c. Make sure that the number
that is shown on “System Version” has been upgraded to the newest version.
Step 7-b
Introducing our new V2.09.22 firmware
-
Fix the issue that YouTube videos might not be cast or mirrored to the projector stably. (Firmware versions that are earlier than V.2.3.28. Please notice that 3.28 is the released date of the firmware)
-
Able to set the timer for the Companion mode or turn off it. (Settings>other settings>Screen Saver>off)
-
The original sound will be bigger and “Sound Mode” added to the second menu so that you can get louder sound by adjusting the sound equalizer on “Personal.” You will be able to adjust the image settings.
-
Long press the Menu button to get the second menu to choose the sound mode:
Standard
Music
Movie
Personal -
If you want a louder sound when watching movies, please try to get
personalized EQ on the “Personal.”
120Hz (emphasize low sounds)
500Hz (emphasize low sounds)
1.5KHz (bring vocals out)
5KHz (bring vocals out)
10KHz -
Allow the adjustment on the image. Choose Image Mode>Personal, and you
can make your own settings for the image.
Brightness
Saturation
Sharpness
Hue
If you have any problems during the upgrade, please don’t hesitate to
contact[email protected] for help.
Copyright @ETOE Product Model: A1171
Documents / Resources
| ETOE
D2 Pro Android TV Mini
Projector
[pdf] User Guide
D2 Pro Android TV Mini Projector, D2 Pro, Android TV Mini Projector, TV Mini
Projector, Mini Projector, Projector
---|---