ETOE A1362 Android TV Projector User Manual

Projector A1362
User Manual

Quick Guide etoeofficial.com/pages/guide
https://etoeofficial.com/pages/dynamic-qr-codes-for-our- store?r=8QOU3PZ5JHYD
Please contact us via

https://etoeofficial.com/pages/dynamic-qr-codes-for-our-store?r=PS79OA0R8V12
etoeofficial.com/pages/contact
  support@etoeofficial.com

Safety Instructions

Read all instructions before you use ths device. Do not make any changes that are not descrived i this manual.
If physical injury, loss of data, or damage is caused by failure 10 follow nstructions, the warranty does ot apply.
Setup

• To reduce the risk of fire andjor electric shock, do not expose the device 10 e or moisture, and obiectsfled with uics, such as vases, should ot be placed on the device.
• Do not place the device on soft surfaces such as tablecloths or carpets a5 doing s0 could be e hazard
• D0 notplace the device in areas susceptible o excessive dust and i or near any applance generating a strong magneti il.
• To prevent ovetheating,do ot lock o clog the ventiaton aperings.
• Never place the device ina confined space. Aliays leave enough space around the cvice forventlation.
• Protect he device aglnst direc sunigh, heat, large emperature fluctuations and moisure.
• When the device runs for a long period of time and the surface becomes o, shut it cown and unplug he povier corc. Resume operation ol aftr the device has cooled.
• Always handle the device with care. Avoid touching the lens.
•  Never plce heavy or sharp obiects onthe device o th power Gord.To avoid slectrc shock. do not disassemble,
• Only use attachments or accessories specified by the manufacturer.
• Avoid exteme vibration, | may damage the nernal componanis.. Do not allow ol to handiethe cevice wihout supervison.
• Under the following conditions, a layer of moisture can appear inside the device which can fead to mallunciions.
  a) if the device is moved from a cold to a warm area;
  b) after a cold room is heated:
  c ) when the device is placed in a damp room.
  To avoid any mofsture, seal he device n a st bag before moving it to another room, and wait for one to two hours before you take it out of the bag.

Power Supply

• Use only the provided power adapter.
• Power off the device before removing the power supply from the socket.
• Protect the power cord from being walked on or pinched, particularly at plugs. convenience receptacles, and the point where they exitfrom this. device
• Unplug this device f there are lightning storms or when unused for a long period of time.
• Where the power plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
• Before you make or change any connections, ensure that alldevices are disconnected from the power outlet
• Do ot touch the power Gable or the power connector with wet hands.

Hearing Safety
To avoid hearing damage, do not listen for extended periods at high volume. Set the volume at a safe level.
Cleaning

• Power off the device and remove it from the power supply before cleaning the surface.
• Use a soft, lint-free cloth. Never use liquid, gaseous, or easly flammable leansers (ike sprays, abrasives, polishes, and alcohol). Wipe over the surfaces gently. Be careful that you do not scratch the surfaces.
• Do not use any liquid cleaning agents to clean the lens as they may. ‘damage the protective coating on the lens. Use lens cleaning paper to cleanhe lens of the projector.

Repairs

• Do not make any repairs 1o the evice by yourself. Only have your device repaired by an authorized service center.
• Improper maintenance can result n injuries or damage to the device.
• Refer all senvicing 1o qualified service personnel

Caution

• Do not stare at operating beam, the bright ight may hurt your eyes.

What’’s Included

Overview
Projector

1. Airventiation(Outlet)
2. Lens
3. Tof (Auto focus)
4. Tripod screw hole
5. DC-n
6. USB port
7. HDMI Port
8. IR recever
9. AUX port
10. Handle

Attention:

• Please do not look into the lens directly to avoid harm for your eyes.
• Please do not block the air ventilation(Outlet),

1. Press the button once: power on
   Press the button twice: power off

2. Signal source

3. Access more options during play
   (available depend upon the source)

4. Activate Google assistant, Google’s
   voice-powered virtual assistant service

5. Projector setting

6. OK
   Prass to contirm a selection or entry

7. Navigate menus of adjust the selected content

8. Return to the previous menu

9. Go to projector Homepage

10. Go to Android TV homepage

11. Volume down / up

12. Adjust the focus

13. Mutes the projector’s audio

14. Preset Youtube button

15. Preset Netflix button

16. Preset Prime Video button

17. Preset Disney+ button

Get Started

Placement

1. Place the projector right towards the projection surface to get a rectangle picture.
2. The distance between the projector and the projection surface determines the picture size.
3. Check the projection distance and screen size on the specifications part.

Prepare the Remote Control
Install the remote control batteries (batteries not included).

1. Press and open the battery cover, as illustrated.

2. Install two AAA batteries. Make sure that the positive and negative ends are positioned correctly, as illustrated.

3. Place the battery cover back until it clicks into place.

4. The distance between the remote and the projector should not exceed 10 m / 33 ft.

Power On

• Press the power button once to power on.
• Press the power button twice to power off.

Focus
Auto Focus
Place the projector towards a suitable projection surface or wall, the projector will automatically focus the image.
Manual Focus
You can also manually focus through the remote control. Press the F+/F— button on the remote control, until the picture is clear.
Note: The projection distance must between 1.1m to 4.1m.
Select Your Language
When start the projector for the first time, you will be guided to a page to select language, use remote control to select your language. Then press the right button and select “Complete” to enter the next page.

Settings

Projection Settings
Press the button , on the remote control, go to projector homepage, and select Settings.
Projection Mode

Zoom in/out
Use the remote control to resize the picture size from 50% to 100% without moving the projector.
Keystone Correction
This Projector support Auto keystone correction, digital keystone correction, and remote four-point keystone correction.
Auto Keystone Correction
When the projector image is distorted, it will perform auto keystone correction to restore the image to a rectangle. If you find the auto keystone correction does not work as well as before, follow the instructions below to optimize it.

1. Press the button to go to projector homepage, into [Settings] -> [Projection Settings] -> [Calibration Settings].
2. Select [Keystone Benchmark Correction], and adjust the projector for the correct image.

Digital Keystone Correction
When fixing your projector in a place, use digital keystone correction.
Press the button to go to projector homepage, select [Settings] -> [Projection Settings] -> [Vertical Correction] / [Horizontal Correction], press left or right button on the remote control to adjust.
Vertical Correction Horizontal Correction Four Point Correction
If the projected image is stretched or distorted along both axes due to the angle of the projection, press the button to go to projector homepage, and select [Settings] -> [Projection Settings] -> (Four point Correction], choose the corner you want and press left or right button on the remote control to adjust.
Four Point Correction
Keystone Correction Reset
To restore the default settings, select Keystone Correction Reset and press “OK”.
Other settings
Screen Saver
The screen saver automatically starts whenever your projector sits idle for the default time. You could change the default time or turn it off.
Screensaver Video
Select default screen saver video.
Screensaver Timeout Shutdown
Set the shutdown timer for the projector.
Language Settings
Select an on-screen display language.
Restore Factory Settings
Reset your device and restore factory setting.

Wired Connections

1. Connect to an HDMI Playback Device
This projector supports connections with various HDMI playback devices such as PC, TV stick, TV box, DVD player, set-top box (STB), game console or other devices.

1. Connect this projector to an HDMI playback device with an HDMI cable (not provided).
2. Press the button on remote control to go to projector homepage, select [HDMI], and press[OK].

2. Connect to a Flash Drive
Method 1:

1. Plug in the USB storage device.
2. Press the button on remote control to go to projector homepage, select [USB], and press.
3. Select the file you plan to play from the file and folder menu.

Method 2:

1. Install the File Explorer app from the GOOGLE Play Store on the projector.
2. Install a media player app such as VLC.
3. Plug in the USB drive into the projector to play your videos.

3. Connect to a Headphone via AUX Cable
You can connect a headphone or speaker to Projector via AUX cable as well.

1. Plug in the 3.5mm AUX cable connector to projector AUX port.
2. Plug the other connector of the 3.5mm AUX cable to your headphone or speaker.
3. Play your media on projector.

Shortcut Menu

Press the button to pop up the shortcut menu

• Press navigation button to select the option
• Press button to go to the next page
• Press button to adjust parameter
• Press “OK” button to save

Image Mode| Standard| Keeps natural looking colors with a balance of warm and cool tones
---|---|---
Light| Provides more picture details and color sharpness
Soft| Provides warm colors with lower light
Personal| Manually set the Brightness, contrast, Saturation, Sharpness and Hue
Color Temp| Cold| Provides cold color temp
Normal| Provides normal temp
Warm| Provides warm temp
Personal| Manually set the Red, Green and Blue
Sound Mode| Standard| Provides standard tones
Music| Provides more detailed tone
Movie| Provides home theater-style sound
Personal| Manually set the sound of each frequency band
Projection Setting| Zoom In/Out| Zoom in or out of the projection image
Vertical Correction| Perform keystone correction
Horizontal Onrrectinn
Four Point Correction
Keystone
Correction Reset| Reset keystone correction

Specifications

Specifications
CPU: ARM Quad 64-bit Cortex-A53
Native Resolution: 19201080
Throw Ratio: 1.22
Aspect Ratio: 16:9 / 4:3 Adaptive
Speaker: 10W2 Stereo Speaker
Connection Port: HDMI1; USB1; AUX*1
Zoom: 50%-100%
Keystone Correction: +40°, Auto keystone support
Recommended Ambient: 41°F to 95°F / 5°C to 35°C
Relative Humidity: 15% ~ 85% (non-condensing)
Warranty
30-Day Money-Back Guarantee for Any Reason

You may return your undamaged product within 30 days of the date of  purchase to receive a full refund for any reason.
For non-quality related warranty claims, the buyer is responsible for shipping costs.
12-Month Warranty for Quality-Related Issues
Every ETOE product comes with one year of quality-related issues coverage.
If you submit a claim to our support mail, ETOE will, at its option:

1. Replace the ETOE Product with a replacement product of the same model and cover any return shipping costs.
2. Exchange the ETOE Product for a refund of your purchase price.

Projection Distance and Screen Size

Screen size (Inch)| Width (Inch)| Width (cm)| Height (Inch)| Height (cm)| Distance (ft)| Distance (cm)
---|---|---|---|---|---|---
40| 35.| 89.| 19.6| 49.8| 3.5| 108.0
60| 52.| 133.| 29.4| 74.7| 5.3| 162.1
80| 70.| 177.1| 39.2| 99.6| 7.1| 216.1
100| 87.| 221.4| 49.0| 124.5| 8.9| 270.1

FCC Notice

This device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the partly responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

RF Exposure Warning Statements
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Model: A1362
© ETOE Technology Limited.
All rights reserved. ETOE and the ETOE logo are trademarks of ETOE Technology Limited
which is registered in the United States and other countries. All other trademarks are the property of the irrespective owners.
Manufacturer: HUNAN ETOE Technology Co., Ltd
Address: Room 603, Building 3, Zone A, Jindaoyuan, NO.169, Huizhi Zhong Road, High-tech District, Changsha
E-mail: support@etoeofficial.com
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>