RAINPOINT HIS019WRFHTV213FRF 2 Zone WiFi Sprinkler Timer User Guide
- June 14, 2024
- RainPoint
Table of Contents
Quick Start Guide
HIS019WRFHTV213FRF 2 Zone WiFi Sprinkler Timer
MODEL NO: , HIS019WRF，HTV213FRF
Connection ：
-
Download the APP，create an account and log in. Search for ＂Homgar ＂ and download the APP or scan the QR code to download:
|
---|---
https://apps.apple.com/in/app/id1527535459|https://play.google.com/store/apps/details?id=com.baldr.homgar
-
Find “+” button on the top right corner of the APP’s Home Page. Select “Display Hub”, then enter the Wi-Fi information and go next. (Only support 2.4Ghz WiFi)
-
Power on the hub with the power cable. Press and hold the “Wi-Fi”button of the hub for about 5 sec until it shows “SCAN”. When “SCAN” appears, check “All steps completed ” box on APP and then select “Next” to start searching devices.
-
When device found, please click “+” to add the device and edit the device name as your like. Then you successfully add the hub to your APP.
-
After the hub is successfully connected. Select the＂+＂ button on the top right corner of the APP home page to add device, or you can go to the hub’s home page and use ＂Sub-devices＂to add devices.
-
Find “2-ZONE Water Timer” or the icon to add HTV213FRF water timer. And then insert 4 new AA 1.5V alkaline batteries (not included) to the timer.
-
Press and hold the left button of the timer until the light flashes red quickly. Meanwhile, select “Next” on the APP and start searching devices.
-
After successfully connecting, the last water usage value will display in the middle of the timer’s screen. The next watering plan time will display as well after creating plans.
Note:
- Please make sure you are using 2.4GHz when connecting devices to the APP.
- Keep the hub always under 2.4GHz Wi-Fi to keep the connection well.
- If you miss the connection for the first time, please hold the button on the timer to start pairing mode again and reconnect on the APP.
If you need more detail information about the operation, please scan the QR
code or search the link to access the video to check the device quickly and
easily.
HIS019WRF Setup Video:http://bit.ly/3WR5kWP
HTV213FRF Setup Video: http://bit.ly/3jlUEBV
Installation:
Install the timer vertically on the tap.
NOTE ：
- Turn off the garden faucet.
- Wrap Teflon Tape around the faucet threads.
- Screw the timer to the garden faucet and make the display is as vertical as possible to the ground to prevent rainwater from accumulating and leaking into the interior.
- Turn on the faucet after programming the timer.
- Under freezing temperatures, timers should be removed from the faucet and stored indoor to avoid potential freezing damage.
- Please clean filters regularly and replace them if it is worn in order to prolong the working life of the timer.
Troubleshooting:
Problem
| Possible Factors|
Solution May Help
---|---|---
Can’t turn on /off the valve| •Low battery.
•Impurities in
water inlet.
•Unstable network or delayed response.| •Replace fresh batteries.
•Regularly clean the filter port of impurities to avoid disruptions in use.
•Wait a while and try again.
Timer can’t connect| •Unstable WIFI network.
•Long distance from the hub.
•Timer not in pairing state.| •Check that the WIFI. network environment is
working.
•Close to hubs and
routers when connected to irrigation timers.
•Re-pair the timer: Press and hold the timer button until the white light
flashes rapidly to indicate pairing.
(Or remove the device from the homepage and reconnect)
Hub can’t connect| •Not using 2.4GHz WIFI.
•Incorrect WIFI
password.
•Hub not in pairing state.| •Confirm 2.4GHz WIFI connection.
•Confirm that the WIFI password has been entered correctly.
Power problem| 1.The display hub uses 5V adaptor as the main power source, and
batteries used only as a backup.
2.Replace a new adaptor. It is important to use the correct adaptor on all
electronic equipment.
---|---
Disconnection| 1.Batteries often resolve the connection.
2.Distance/Resistance may cause loss of connection between the sensors/ sub-
devices and the display hub.
3.Please make sure the wifi network works normally and stabled.
4.Try to restart the device and reconnect.
Outdoor sensor drains batteries quickly| 1.Check the distance and resistance
between the outdoor sensor and display hub. Outdoor sensors at the end of the
range may work while batteries are fresh but not after they drain a bit.
2.Check if leaking batteries, which may damage the outdoor sensor.
3.Battery life is over 12 months only using Alkaline batteries. Mixed using of
used and new batteries, using Carbon batteries or rechargeable batteries may
reduce battery life.
Device offline| 1.Check if the battery is fully charged or the power supply is
normal.
2.Poor network signal or too far from the router.
CUSTOMER SUPPORT
If you find it difficult to set up and want to watch the setting tutorial
video, please subscribe to our channel RainPoint on YouTube.
Or scan the QR code to visit the RainPoint channel on YouTube
quickly.https://www.youtube.com/channel/UC1E5mRVq717cXvRwTBLYXtg
If the app and the user manual don’t have what you’re looking for, and need
some help about Rainpoint, please contact us by
Email: [email protected]
WhatsApp: +1 626-780-5952
US Free Hotline(English): +1
833-381-5659
(MON-FRI 9:30 AM-5:30 PM PST)
EU Free Hotline(English Deutsch): +44
800-808-5337
(MON-FRI 9:00 AM-5:00 PM CET )
Warranty
Rainpoint provides a 1-year limited warranty on this product against
manufacturing defects in materials and workmanship.
If you contact us to register and activate the warranty, you can get a longer
warranty period.
Please search the link below or email us to register and extend to 5-Year
Warranty.
Link:
www.rainpointonline.com/pages/warranty
mail: [email protected]
EC REP
NAME：VIAJE ELECTRONIC COMPANY LIMITED
ADDRESS：E588, 13 ADELAIDE ROAD, DUBLIN,
D02 P950, IRELAND
Email：[email protected]