RainPoint ICS006-DLS Digital Hose End Water Flow Meter User Manual
- May 15, 2024
- RainPoint
Table of Contents
USER MANUAL
Water Flow Meter
Model No. ICS006-DLS
Product Overview
Specifications
Waterproof | IPX6 |
---|---|
Water Flow Rate | 1-40 L/min (0.3-10.6 GPM) |
Max Water Consumption | 9,999.9 L or 9,999.9 Gal |
Working Pressure | 0.5 bar-8 bar (7.25-116 PSI) |
Flow Max | 10.6 GPM (2400L/H) |
Measurement Tolerance | ±5% |
Water Temperature | 41°F-104°F( 5°0-40°C) |
Suitable For | 3/4 inch standard faucet / hose / sprinkler |
Quick Installation & Precautions
3.1 Installing the Battery
-
Hold the handles on both sides and pull out the display. Or Hold one handle, then push the other side from the back to take out the display.
-
Take out the battery cover, insert a CR2032 battery (included) according to the instructions next to the battery slot, and firmly reinstall the battery cover back.
Tips: How to remove the battery from the slot?
Pinch the sides of the battery cover and clamp the battery out.
3.2 Installing Your Device
Precautions
- Use the water flow meter in the Out-of-Box Pre-Assembled order to avoid water leakage.
- Follow the direction of water flow to install the product to ensure accuracy.
- Be sure to tighten all connectors before use.
- If you have any questions, please feel free to contact us.
Get Started
4.14 Measurement Modes
Press the button briefly: The display switches to the next display mode.
-
FLOW MODE: Display the real-time water flow in GAL/Min or L/Min.
-
CONSUMPTION MODE: Measure the single water consumption.
The display will reset after 30 sec without water flow or pressing the button. -
AVG MODE: Display the daily average water consumption for the last 7 days.
-
TOTAL MODE: Measure the total water consumption up to the reset.
4.2 Special Functions
- Energy-saving Standby: Displayer auto shut-off (longer than 1 min without flow or without the pressing of a button).
- Switch GAL & L Unit: Hold the button pressed for 2 sec in FLOW MODE to switch the format between gallon (GAL) and liter (L).
- Reset to Zero: Hold the button pressed in CONSUMPTION/AVG/TOTAL MODE for 2 sec. The display data will be reset to 0.
- Low Battery Indicator: Replace the battery when the low battery indicator appears on display.
Troubleshooting
Problem | Check If |
---|---|
Flow Mode doesn’t show the real-time water flow during watering | The display |
installed tightly into the flow
meter body.
Inaccurate Measurement| The display installed correctly.
The display installed tightly into the flow meter body.
The water flow direction goes correctly.
There is no leakage.
The inner pipeline of water meter is full of water when using.
Leakage| The accessories are in the correct position
screwed with the correct thread.
If your Rainpoint product does not operate properly after trying the
troubleshooting steps, please contact us by email:
support@rainpointonline.com
Warranty Policy
Rainpoint provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.
- Warranty service can only be performed by our authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to us, or our authorized service center.
- To receive warranty service, the purchaser must contact with Rainpoint nominated service center for the problem determination and service procedure.
Thank you for your choice of Rainpoint products!
Customer Support
If you find it difficult to set up and want to watch the setting tutorial
video, please subscribe to our channel: Rainpoint on YouTube.
If the user manual don’t have what you’re looking for, and you need some
helps, please prepare the LOT NO. of your device and contact us before
returning the Rainpoint to the store.
LOT NO.: XXXXXX (on the back of the meter)
Email: support@rainpointonline.com
Need Help ?
Scan the QR code for more help.
https://www.rainpointonline.com/pages/support
or Email:
support@rainpointonline.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>