RainPoint TTV102B Bluetooth Irrigation Watering Controller User Manual
- October 27, 2023
- RainPoint
Table of Contents
TTV102B Bluetooth Irrigation Watering Controller
User Manual
Catalog
-
Product Overview
1. Product Appearance
2. Product Specifications -
Main Functions
-
Installations
1. Connection and Basic Information
2. Version Upgrade
3. Manual Operation
4. Weather Delay
5. Plans and Settings
6. Irrigation History -
Tips for Operation
-
Warranty & Warnings
-
Customer Support
Product Overview
Product Appearance
Product Specifications
Working Pressure | 0.5bar-8bar (7.25 psi-116 psi) |
---|---|
Flow Rate | 5L/Min-35L/Min |
Working Temperature | 3°C-50 °C (37.4 °F-122 °F) |
Waterproof | IP54 |
Power By | 3 AAA alkaline batteries (not included) |
Inlet | NH(US) for 3/4″ faucet / hose BSP(EU) for 1″ or 3/4″ faucet / hose |
Outlet | For 3/4″ standard garden hose |
Main Functions
- Set and check irrigation schedule through smart phone APP, connecting with Bluetooth
- Manually ON/OFF the water timer
- With 2 schedule types: Normal Schedule and Cycle & Soak
- Weather delay 24/48/72 hours
- Irrigation history track to avoid operation error
- Low power indicator
- Built-in filter
Installations
Connection and Basic Information
https://smartapp.tuya.com/baldrhomegarden
-
Search for RainPoint on Google Play or App Store or scan the QR code to download the RainPoint APP. Follow the prompts to register a RainPoint account or log in with an existing account.
-
Insert 3*AAA batteries first, then press and hold the rubber button until the blue LED light rapid blink, which means the device is ready for connection.
-
Please hold the button on the timer for 6 seconds to ensure that the blue light flashes quickly. Select “Add Device” to start connection and then find“Bluetooth Smart” in the series of “Smart Irrigation”. Turn on Bluetooth on your phone. Then, confirm the prompt at the bottom and click “Next” to start the device search.
-
Press the “ ” buttom on the right of the found device and tap the “Next” button after connection finished.
-
Press “Done” for final confirmation after device is added successfully
-
After connected, the paired devices will show on the Home page. Click the Bluetooth Water Timer and get into main page of the device.
-
The following information is shown on the page: Weekdays, Battery status, Device status, Weather Information, Irrigation Duration, Last Run Time, Next Run Time.
-
At the bottom, there is an operating panel with several options:
Manual button, Weather Delay, Schedule Setting, Irrigation History.
| Manual Button for instant watering need.
---|---
Weather Delay for 24/48/72hours.
Schedule Setting with normal schedule and cycle & soak schedule for options.
Irrigation history for irrigation track and avoid false operation. -
Press the button on the top right corner to enter device information page.
Version Upgrade
-
Enter the timer app interface, if there is a version update, the system will automatically push the update version notification
-
Click “Update Now” to enter the update version interface. The version number of this update will be displayed here. Please click “Update” again.
-
When upgrading, please do not exit the upgrade page, keep the Bluetooth on, and the distance between the phone and the device is not too far.
-
The progress bar can check the update progress.
-
If the device has been upgraded to the latest version, the product information page will display “No update available”.
Manual Operation
Manual mode: Click the “ ” to manually turn ON the water timer to start
watering. The default time is 10 mins.Click the “ ” to manually turn off water
timer.
Tap the central circle to set manual watering time, from 1 min to 24 hours.
Weather Delay
Tap the “Weather Delay” to enable the rain delay function. The weather delay
can set with 24H, 48H, 72H and closed delay.
Schedule and Settings
-
Schedule Type
On the schedule page, after select button, there are two types for selection: Normal type and Cycle & Soak type.
Normal Schedule: means device watering at a specific time.
Cycle & Soak: means the device will run the watering schedule repeatedly in this period. -
Schedule Settings
Click and choose the schedule type you need and confirm the watering start time, duration, weekdays to water, and save the all settings.
The Soak & Cycle type have different setting options. It needs to set the start time, end time of irrigation, the cycle duration and soak duration. r
Remark
a. The minimum period cannot be greater than the total time period
b. There will be time conflict notice when the time schedules overlap, causing plans fail of setting.
When all the plans are set up, they will be displayed on the timer list.
There are shortcut button behind each group of plans to quick start or stop
the plan directly.
Irrigation History
Every irrigation plan will be recorded. It’ s convenient for users to track
the implementation of irrigation plans.
Tips for Operation
- Please make sure the smart phone is near the Bluetooth water timer when connecting or setting the watering plan. The best range for connection and operation is within 60 meters in the open area.
- The watering timer will follow and perform the preset watering schedule after application set successfully, even if the phone is out off the best connecting range.
- For a better experience, it is recommended to update the device version of the timer to the latest version before use. If there is a push to update the device version later, please upgrade to use the latest version to optimize and upgrade some functions.
Warranty & Warnings
-
Warranty
The warranty aims for the problem of non-artificial damage and provides a one- year warranty from the date of leaving the factory. -
Warnings
1. Under freezing temperatures, timers should be removed from the faucet and stored indoors to avoid potential freezing damage.
2. Please clean filters regularly and replace if it is worn in order to prolong life of timer.
Customer Support
If you find it difficult to set up and want to watch the setting tutorial
video, please subscribe to our YouTube channel: RainPoint, or visit the link
https://rainpointus.com/pages/playlist
If the app and the user manual don’ t have what you’ re looking for, and you
need some help, please prepare the Model NO. and LOT NO. of your device and
contact us before returning the products to the store.
US Free Hotline: 1-833-3815659
Email: service@rainpointus.com
Model NO.: xxxxxxxxxx(On the timer label)
LOT NO.: xxxxxxxxxxxxxxxx(On the timer label)
Scan the QR code to vist the setup video
https://rainpointus.com/pages/playlist
Need Help? Call 1-833 3815659
Or email to service@rainpointus.com
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, ifnot installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment do esca use harmful in reference to
radioor television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm
between the radiator your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>