FOREPIN Motion Sensor Lights Indoor User Manual
- June 14, 2024
- FOREPIN
Table of Contents
FOREPIN Motion Sensor Lights Indoor User Manual
SPECIFICATIONS
Notes
- The induction time is 20 seconds.
- The installation position such as too low, too high or the probe was blocked will affect the sensing range. To ensure a better effect, it is recommended to mount it facing the side passing by.
SENSING RANGE DESCRIPTION
- The sensing range of the lamp is the area within 120 ° and 3-5 meters with the probe as the center point.
- However, improper installation or blocking the sensing probe will affect the sensing sensitivity.
CHARGING DESCRIPTION
Charging voltage: DC 3-6V
Notes
- Do not use a charging device with output voltage greater than 6V to charge the light.
- In order lo ensure charging safely and efficiency, please use the mobile phone charging adapter with safety certification lo charge the light.
- Do not use ii when charging.(The sensing mode can’t work normally when charging.)
INSTALLATION DESCRIPTION
PACKAGE CONTENT
- LED Motion Sensor Night Light
- Iron Sheet
- USB Charger Cable
- User Manual
- Double Sided Tape
CAUTIONS
- Please fully charge the light before using it for the first lime, otherwise the light may not work properly because of the circuit protection. (The protection is automatically released after charging.)
- The duration of power usage depends on how the light is used. The more frequently it is used, the faster the power will be consumed.
- The brightness of the light will decrease as the battery power decreases. When the brightness becomes low, please recharge the light promptly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>