FOREPIN B15M9Kdu0NL LED Motion Sensor Night Light User Manual

: June 14, 2024
: FOREPIN

Table of Contents

MOUNTING THE LIGHT
IMPORTANT NOTE
ATTENTIONS
SPECIFICATIONS
THREE MODES
PACKAGE CONTENTS
CUSTOMERS SUPPORT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FOREPIN B15M9Kdu0NL LED Motion Sensor Night Light

MOUNTING THE LIGHT

OPTION 1:

Strike the screw (not included) into the wall and ensure the head of screw protruding about 0.25 inches from the wall.
Align the hanging hole of the light and hang it on the head of the screw.

OPTION 2:

Tear Off the “Release Paper” on the Magnetic Adhesive Tape, then stick it to the back mounting plate of the LED body.
Please Peel off the” Release Paper” on the double sided tape . Stick one side to the mounting surface of wall , closet, headboard, etc.
Then Stick the Magnetic Adhesive Tape to the surface of wall , closet, headboard ,etc.
Use the Magnetic Adhesive Tape to attract the back of the LED light and fix its position.

IMPORTANT NOTE

In AUTO mode, light may not turn on in day light or bright surroundings.
Non-waterproof, do not use it in any heavy humidity or low temp location.
Try not to mount 2 auto motion sensor night light too close .They may affect each other in AUTO mode.

ATTENTIONS

Please recharge it in time when the light is dim.
Please DO NOT over charge the light.
Please unplug the USB cable in time when the light is fully charged.
Please keep the light dry and clean.
Do not repair, disassemble, or modify the product without approval.
Do not place it near any heat sources or in direct sunlight. Place on flat, secure surface.
Do not touch electrical appliance with wet hands or when liquids are presented .
Clean only with a soft dry cloth and do not use solvents or cleaning solutions.
Never overload electrical circuit as it may cause electrical shock or fire.

SPECIFICATIONS

Detection Range: 1 Oft
Motion Angle: 120°
Light Duration: Approximately 25 seconds from last motion detected
Brightness: 1601 m
Input Voltage: 5V DC
Output Voltage: 3 7V
Battery Capacity: 1 000mAh
LED Life: Above 80000h
Working Temperature:- 10-50°C
Charging: Red light up
Fully Charged: Red light off
Working Time at ON Mode (Fully Charged): Last for 5-5.5 hours
Working Time at AUTO Mode (Fully Charged): Last for 45-60 days (5-8 times everyday)

THREE MODES

ON: Constant Lighting (Turn on and keep it lighting up continuously)
OFF: Turn Light Off (Turn off the light to deactivate the LED, not light up any time in this mode)
AUTO: lt will light up automatically in the dark when movement is detected in the 1 Oft range and it will automatically turn off after about 25 seconds if no motion is detected.