Forepin 3000MAH Under Cabinet Kitchen Light User Manual
- June 14, 2024
- FOREPIN
Table of Contents
**Forepin 3000MAH Under Cabinet Kitchen Light User Manual
**
Please read the manual before use.
[Attention]: Please make sure to fully charge the battery before using it
for the first time.
FUNCTION DESCRIPTION
Button type
Function description
- Press the button to switch between white light, warm light, and natural light.
- Long Press the button under “ON” mode to adjust the brightness. (The brightness can be memorized).
Initially closed.
- Press the button once for the ON mode. (The sensing function won’t work and the light stays on).
- Press the button again for the Night sensing mode. (This mode is indicated by three flashes of the light).
- Press the button for the third time to enter the All day sensing mode, which is indicated by two flashes of the light.
- To turn off the light, press the button for the fourth time.
Special Instructions for Sensing Mode
- Special Instructions for Sensing Mode
- Night sensing mode: The light will only turn on automatically if it is totally dark outside and motion is detected.
- All day sensing mode: The light will turn on automatically when motion is detected, regardless of whether it is daytime or nighttime.
- If there is no more motion detected, the light will automatically turn off after 25 seconds.
- The light will stay on if a human remains in the sensing range.
- Please do not place two lights too close, as they may interact with each other.
SENSOR RANGE DESCRIPTION
PIR Sensor:
The light has a PIR sensor that senses movement within a range of 10ft/120°.
CHARGING DESCRIPTION
- Charging Voltage: DC5V
- Charging: Red light
- Full Charged: Green light
- Charging Time: 3-4 hours
Working Time: After being fully charged, it will light up over 8-10 hours in “On Mode”, or 45-60 days in “Sensor Mode”
PACKAGE INCLUDE
- 2 LED Motion Sensor Cabinet Lights
- 2 USB Cable
- 6* Iron Sheet
- 1 * User Manual
INSTALLATION DESCRIPTION
Step 1
Ideal for smooth surface, wipe clean before mounting.
Step 2
Attach the 2 iron sheets and then tear off “release paper”.
Step 3
Press the light firmly onto the surface.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>