FOREPIN 4000mAh LED Motion Sensor Cabinet Light User Manual
- June 16, 2024
- FOREPIN
Table of Contents
FOREPIN 4000mAh LED Motion Sensor Cabinet Light
SPECIFICATION
Product Mater i al| ABS+Alum i num| Rated
Voltage| 5V
---|---|---|---
Battery Capacity| 4000mAh| Lumen| 40-300LM
Stepless Dimming| 5-100%| Charging Port| USB
Colo r Temperature| 3000K/4000K/6500K| Charging| RED light
Sensor Mode| Night/Day Mode| Fully Charged| GREEN light
Rated Power| 0.3-3W| Charging Time| 5-6hours(with an adapter)
USING MANUAL
Button Function
- Long press the button to enter the ON mode.
- (In the ON mode, the sensing function won’t work.)
- Press the button for the second tima to entar the Night Sensing mode.
- (The Night Sensing mode will be entered after the green light flashes twice.
- Press the button for the third time to enter the All Day Sensing mode.
- (The All Day Sensing mode will be entered after the red light flashes twice.)
- Press the button for the fourth time to enter the Steady On mode.
- (The Steady On mode will be entered alter the lamp body flash as twice.)
- Four working modes cycle sequentially, and long press the button to enter the OFF mode.
Short press the button to switch between warm light, white light, and natural
light.
Long press the button In “ON” mode to adjust the brightness.(The brightness
can be memorized.)
SENSOR RANGE DESCRIPTION
PIR sensor senses movement within 10ft/120″range automatically turn off about
20s after no motion detected.
Notice : The sensor motion is 240 degrees rotatable.
Special Instructions for Sensing Mode
- Night Sansing Mode: Auto turn on only at totally dark night after motion is detected.
- All Day Sensing Mode: Auto turn on after motion detected no matter at daytime or night.
- Automatically turn off after 20 seconds if no more motion.
- The light stays on if motion is detected within the sensing range.
CAUTIONS
- Please fully charge the product before using it at the first time to avoid affecting normal working.
- The battery is recommended to be charged with an adapter due to its large capacity. It can be fully charged within 5-6 hours when using an adapter, but if charging via USB port, it will take longer.
- Please do not place two closet lights too closely, as they may Interact with each other.