FOREPIN A1yuwYqNt6L LED Motion Sensor Cabinet Light User Manual
- June 14, 2024
- FOREPIN
Table of Contents
FOREPIN A1yuwYqNt6L LED Motion Sensor Cabinet Light
PRODUCT INFORMATION
MODEL NAME: LED MOTION SENSOR CABINET LIGHTS
Please read the manual before use.
[ Attention ]: Please make sure to fully charge the battery before using it for the first time.
FUNCTION DESCRIPTION
- Press the button to switch between white light, warm light, and natural light.
- Long Press the button under “ON” mode to adjust the brightness. (The brightness can be memorized).
Initially closed
- Press the button once for the ON mode. (The sensing function won’t work and the light stays on).
- Press the button again for the Night sensing mode. (This mode is indicated by three flashes of light).
- Press the button for the third time to enter the All day sensing mode, which is indicated by two flashes of the light.
- To turn off the light, press the button for the fourth time.
Special Instructions for Sensing Mode
- Night sensing mode: The light will only turn on automatically if it is dark outside and motion is detected.
- All-day sensing mode: The light will turn on automatically when motion is detected, regardless of whether it is daytime or nighttime.
- Night sensing mode: The light will only turn on automatically if it is dark outside and motion is detected.
- All-day sensing mode: The light will turn on automatically when motion is detected, regardless of whether it is daytime or nighttime.
SENSOR RANGE DESCRIPTION
PIRSensor:
The light has a PIR sensor that senses movement w1th1n _ a range of 1
0ft/120°.
CHARGING DESCRIPTION
- Charging Voltage: DC5V
- Charging: Red light
- Fully Charged : Green light
- Charging Time: 3-4 hours
Working Time : After being fully charged, it will light up over 8-10 hours in “On Mode”, or 45-60 days in “Sensor Mode” (6-8 times every day).
PACKAGE CONTENTS
- LED Motion Sensor Cabinet Lights
- USB Cable
- Iran Sheet
- User Manual
INSTALLATION DESCRIPTION
-
STEP 1
Ideal for a smooth surface, wipe clean before mounting. -
STEP 2
Attach the 2 iron sheets and then tear off the “release paper”. -
STEP 3
Press the light firmly onto the surface.
THANK YOU FOR CHOOSING US!
MADE IN CHINA
Read User Manual Online (PDF format)
Loading......