Prestigio 155402 Graphene PD Watch User Guide
- June 6, 2024
- Prestigio
Table of Contents
Prestigio Graphene PD Watch
Power Bank
Quick Start Guide User Manual
Version 1.0
Product Bundle
Portable charger 1 pc.
Power adapter 12V/5A 1 pc.
Quick Start Guide 1 pc.
Warranty card 1 pc.
Components and Interface Elements
1. Power button
2. USB-С
3. Port use indicator
4, 5. USB-A| 6. Battery level indicator
7. Center of a pad for locating the smartphone for wireless charging
8. Center of a pad for locating the smart watch for wireless charging.
---|---
Operation Guide
Charge your device before using it for the first time.
Charging via cable
Connect the device that you would like to charge to the respective port by
using an appropriate cable. Wait for 10 seconds. If charging has not started,
press the power button on the portable charger.
Wireless charging
- Press the portable charger’s power button
- Place your watch/smartphone in the appropriate places for wireless charging.
Read Before Using
Thank you for choosing the Prestigio Graphene PD Watch wireless charger.
Please read this manual before you start. This will help you operate it safely
and make the best use of all its features. Do not discard the manual, as you
may have to refer to it in the future. Please note that the design and
position of certain elements may differ from the images and descriptions you
will find below because, as part of its commitment to continuous improvement,
the manufacturer reserves the right to alter the charger’s specifications
without prior notice.
The company will not be held liable for damage caused by improper use of the
charger.
The purpose of this manual is to provide information, and it does not
constitute any overt or covert warranty.
For the latest updates, go to www.prestigio.com.
Benefits of Prestigio Graphene PD Watch portable charger
The Prestigio Graphene PD Watch portable charger is designed exclusively for
your convenience and combines all the features of a modern, high-tech device
within an excellent design. The device casing is made of aluminum and black
tempered glass.
The portable charger in combination with the wireless charging feature
provides maximum convenience and flexibility during its application.
External power bank Graphene PD Watch supports passthrough technology
wireless charging available during recharging of power bank.
It takes only 60 minutes to charge your device using the included power
adapter.
All of Prestigio Graphene PD’s ports support the modern QC3.0/PD quick charge protocols.
Product Bundle
Wireless charger
Power adapter 12V/5A
Quick Start Guide
Warranty card| 1 pc.
1 pc.
1 pc.
1 pc.
---|---
Technical Specifications
| Weight | 0.357 kg |
|---|---|
| Dimensions | 110.381.217.4 mm (lwh) |
| Body material | Aluminum, tempered glass |
| Capacity | 10000 mA |
| USB-А1 (output) | QC3.0 (5V3A/9V2A/12V1.5A) |
| USB-А2 (output) | QC3.0 (5V3A/9V2A/12V1.5A) |
| USB-C (output) | PD3.0 (5V2.4A/9V2.2A/12V1.6A) |
| USB-C (input) When used with the original charger | 12V/5A |
| USB-C (input) | QC2.0/PD3.0 (5V3A/9V2.0A/12V1.5A) |
| Smartphone wireless interface | Qi 5W/7.5W/10W |
| Smart watch wireless interface | Qi 2,5W |
| Operating temperature | -10…+45 ºC |
| Allowable humidity | up to 95% |
Operation Guide
Fully charge the device before first use. Use the power adapter included.
Wired charging
Connect the device that you would like to charge to the respective port by
using an appropriate cable. Wait for 10 seconds. If charging has not started,
press the power button on the portable charger.
If the quick charge indicator is green during operation, it means that your
device is charging via the quick charge protocols.
ATTENTION
You should only use quality cables to charge your devices, as this will impact on your charging speed.
Wireless charging
- Press the portable charger’s power button.
- Wait for the wireless charging indicator to light up blue 3 times, then go out for 2 seconds, then light up again.
- The indicator will stay on for 7 seconds waiting until you place your wireless charging compatible devices at the designated spot.
- The indicator will continue to blink regularly throughout the wireless charging process to indicate that the charger is in use.
ATTENTION
While charging, do not place any metal objects (including paper clips, coins, keys, etc.) or plastic bank cards between the smartphone and the charging pad. This may damage your smartphone or its case, the charging pad, or the object within the charger’s active range.
Charging multiple devices.
The Graphene PD Watch portable charger can be connected to several devices at
the same time for wired charging, or a combination of wired and wireless
charging. To charge multiple devices, simply connect them to the charger using
any available method.
Safety Guidelines
Failure to observe these safety guidelines may result in harm to your health
- Only use the original cable and power adapter supplied with the device, to charge your product. Use of an offbrand power adapter will immediately void the manufacturer warranty.
- It is forbidden to use the cable and power adapter to charge or re-charge all or any incompatible devices.
- The manufacturer shall not be held responsible for any consequences, direct or implied, of improper use of the cable and power adapter or charging or re-charging a device which is not part of this scope of supply.
- Do not open the portable charger or take it apart.
- Do not attempt to replace the built-in batteries.
- o not break the charger or the included batteries.
- Keep away from ignition sources.
- Do not use the charger inside a case, bag, or other enclosed containers. The charger must always have free access to air.
- Keep away from direct sunlight: do not store or use the charger in direct sunlight, in order to avoid the device overheating.
- Use the charger only for its intended purpose.
- If you have a problem or if any part of the charger has been damaged, stop using it immediately, unplug it, and contact a service centre.
- The charger cannot come into contact with moisture, oil, chemicals, or any organic fluids. We do not recommend using the charger in areas with high humidity.
- Do not use the charger in very dusty places.
- Keep the charger and its accessories out of the reach of children.
LED Indicators
The quick charge indicator is solid green.| The Prestigio Graphene PD Watch is
being charged itself or charges another device via the quick charge protocols
---|---
The smartphone/smart watch wireless charging indicator is blinking blue
slowly| Prestigio Graphene PD Watch is in wireless charging mode. The
smartphone/smart watch is charging
The smartphone/smart watch wireless charging indicator is blinking blue
rapidly| Error. A metal object has been detected between the Graphene PD Watch
and the device being charged via the wireless interface.
The battery level indicator blinks periodically.| Prestigio Graphene PD Watch
is charging
Troubleshooting
General issues| • If you run into any issues, always start troubleshooting by
ensuring that the charger is not damaged or covered in any foreign substances
and that it does not have an unpleasant odor. If you discover any of the
above, stop using the charger immediately and contact the service center
• Ensure that the charger has not been subjected to excessive cold or heat.
Leave it at room temperature for at least 30 minutes. Allowable ambient
temperature for the device is from -10 ºC up to 45 ºC
---|---
The device does not turn on. The battery level indicator does not work| •
Ensure that the charger has not simply lost its charge.
Connect it to the included power adapter for at least 10 minutes
• Ensure that the socket you have plugged the adapter into is receiving power
The device is not charging. The battery level indicator is tuck at 0| • Ensure
that the socket you have plugged the adapter into is receiving power
• Connect the charger to the included power adapter for at least 10 minutes
No charging via the cable| • Ensure that the portable charger has not simply
lost its charge.
• Check the integrity of the cable that you are using.
• Try using another cable.
No charging via the wireless interface| • Ensure that the portable charger has
not simply lost its charge.
• Ensure that your device supports the wireless charging feature
• Ensure that no other objects were placed between the charger and the
smartphone
• Take the smartphone out of its case
• Ensure that your smartphone is properly aligned with the charging pad Try
changing the position of your smartphone a little
The problem isn’t solved| If this didn’t solve your problem or if you have
additional questions, please contact customer support. The contact information
is provided in the warranty card.
Care Recommendations
Clean the charger with a soft, dry cloth or with alcoholfree wipes for
cleaning office equipment.
Transportation and Storage Rules
- The charger is not intended for use in residential, business, or industrial zones with a hazard risk.
- It is recommended to operate and store the device at a temperature from -10 °C up to +45 °C and at a relative humidity of 10~95%.
- A long-term storage is only allowed in the original packaging, in dark, dry, clean, and well-ventilated enclosed compartments.
- It is allowed to carry out transportation by any modes of transport at any distance. During transportation, the device must be enclosed in its original packaging.
Waste Disposal
Do not dispose of the charger and its accessories with regular household waste. At the end of their service life, take them to an electronics recycling facility.