GE FPH-150-3F String A Long 300 Count 62.2 ft Clear Incandescent Plug In Christmas String Lights Instruction Manual

GE FPH-150-3F String A Long 300 Count 62.2 ft Clear Incandescent Plug In

Christmas String Lights

Product Information

The product is a 300-light set consisting of 2 strands, each with 150 lights. The UL model number is FPH-150/3F (0.51). It is designed for seasonal use and should not be permanently installed. The product comes with a safety device (fuse) and spare bulbs.

Product Usage Instructions

1. Storage: When storing the product, carefully remove it from its current placement to avoid strain on the conductors, connections, and wires. Store the product neatly in a cool, dry location protected from sunlight.
2. Electrical Precautions: When using electrical products, always follow these precautions:
   • Read and follow all safety instructions.
   • Do not unplug the product by pulling on the cord. Grasp the plug and remove it from the outlet device.
   • Do not use the product outdoors unless it is specifically marked suitable for outdoor use. If using outdoors, connect it to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not available, consult a qualified electrician for proper installation.
   • Do not mount or place the product near sources of heat such as gas or electric heaters, fireplace, candles, etc.
   • Do not secure the wiring of the product with staples or nails, or hang it on sharp hooks.
   • Unplug the product when leaving the house, retiring for the night, or if left unattended.
   • This product is not a toy and should not be played with or accessible to small children.
   • Do not use the product for any other purpose than its intended use.
   • Do not hang ornaments or other objects from the cord, wire, or light string.
   • Avoid touching the lamps or performing maintenance while the power is on.
3. Fuse Replacement: To replace a blown fuse, follow these steps:
4. Before changing fuses, make sure the set is unplugged.
5. Using a flathead screwdriver, open the fuse cover and slide open the fuse access cover on top of the attachment plug towards the blades.
6. Remove the fuses carefully.
7. Replace the fuse only with a 3 Amp, 125 Volt fuse provided with the product.
8. Close the fuse cover and slide closed the fuse access cover on top of the current tap. Make sure the door is fully closed and the fuses are completely covered.
9. Bulb Replacement: To replace bulbs, follow these steps:
10. Before changing bulbs, make sure the set is unplugged.
11. Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
12. Hold the bulb by the plastic base and pull it straight out of the socket. Do not twist the bulb when inserting into the socket.
13. Replace the bulb with only a 2.5 Volt, 0.425 Watt super brightness midget push-in type lamp provided with the product.
14. If bulbs are twisted, part of the set may not light.
15. If the spare bulbs provided have no plastic base or siding, discard the product if the current tap is damaged.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed

• READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal use product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not place lighting string on carpeting, drapes, furniture, or allow it to contact vinyl siding while the power is on.
• Do not perform any maintenance or troubleshoot for bad or broken lamps while the power is on.
• Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
• Do not cover the product with cloth, paper or any material not part of the product  when in use.
• This product is equipped with push-in type lamps. Do not twist lamps.
• This product employs overload protection (fuse). A blown fuse indicates an overload or short -circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product, Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded.
• Read and follow all instructions that are on the product or provided with the product.
• SAVE THESE INSTRUCTIONS

Use and Care Instructions

• When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
• If the product is placed on a tree, the tree should be well secured and stable.
• Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
• When storing the product, carefully remove the product from wherever it is placed,  including tree, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.

User Servicing Instructions

Fuse replacement:
Most often, fuses blow because too many sets have been strung end-to-end.

• Before changing fuses, make sure the set is unplugged.

• Grasp plug and remove from the receptacle or other. outlet device. Do not unplug by pulling on cord.

• Using a flathead screwdriver, open fuse cover. Slide open the fuse access cover on top of attachment plug towards blades.

• Removes fuses carefully.

• Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse (provided with product).

• Close fuse cover. Slide closed the fuse access cover on top of current tap. Make sure door is fully closed and fuses are completely covered.

• Risk of fire. Do not replace current tap. Contains a safety device (fuse) that should not be removed. Discard product if the current tap is damaged. Bulb replacement: Before changing bulbs, make sure set is unplugged.

• Step 1: Grasp plug and remove from the receptacle or other outlet device.

• Step 2: Hold bulb by the plastic base and pull bulb/base straight out of socket.

• Step 3: Replace lamp with only 2.5 Volt,  Do not unplug by pulling on cord.

If the spare bulbs provided with the product have no plastic base or the plastic base does not fit , first follow steps 1 – 2 above. Then

• Remove the old bulb by straightening the bulb wires and pulling bulb straight from the base.
• Replace the new bulb by straightening the bulb leads and aiming each wire into a separate hole in the plastic base.
• Make sure each bulb lead comes out an exit opening at the bottom of the plastic base. Now bend each lead up such that each bulb lead fits closely against the narrow side of the plastic base.

Caution

CAUTION:
This lighting string is rated 61.2Watts (0.51 Amps), do not overload. Connect other lighting strings or decorative outfits end-to-end up to a maximum of 216Watts (1.8 Amps) total. If connecting to a lighting string that does not have a Wattage (W) rating {found on the tag within 6 inches of the plug} calculate the wattage as follows:
Multiply the current (0.51A) which is on the flag-type tag by 120.
For Example: Lighting string is rated 120V, 60 Hz, 0.51 Amps. 0.51 X 120 = 61.2Watts
Add the wattage of each light string together for a total of 216Watts or less. (Do not exceed 216Watts.)
For questions and/or assistance, call customer service at 1-877-398-7337 or visit us on the web at www.geholidaylighting.com.
FOR INDOOR AND OUTDOOR USE MADE IN PHILIPPINES
PRINTED IN PHILIPPINES E63536 HS-23
© 2023 Nicolas Holiday Limited., Suite 2706 Skyline Tower, 39 Wang Kwong Road, Kowloon Bay,
Kowloon, Hong Kong
All rights reserved.

2-YEAR LIGHTING LIM ITED GUARANTEE

SUBJECT TO THE EX CLUSIONS BELOW
This product was pre-tested before shipment and date coded . In keeping with the National Electrical Code, this product is intended for residential seasonal installation and use (90 day max. per year). Nicolas Holiday Ltd.’s 2-year Limited Guarantee covers repair or replacement (same or equivalent) of this product within two (2) years from the date of purchase. Troubleshooting tips are on your use and care guide included in this box. If troubleshooting is unsuccessful, se nd your product prepaid along with a legible copy of your s ales receipt to St. Nick’s Fix, 24 6 Spring Hill Road, Unit F, Trumbull, CT 06611, Attention: Customer Service. Providing the original UPC code will help expedite your request. W hen mailing the product back to us, please include your name, return address, contact phone number, and e -mail ad dress. Allow four (4) to six (6) weeks for processing. For more information, you can visit us at www.geholidaylighting.com, or call customer support at 1-877-398-7337. Current operating hours can be found on our website.

E XCLUSIONS
Th is product is guaranteed only if it is used as intended. All accessories that may be packed with this product, such as clips and stakes, are guaranteed for the first season only. This Limited Guarantee does not cover: 1) commercial applications, 2) burned out bulbs/LEDs, 3) misuse or tampering, 4) batteries, 5) damage caused by improper consumer handling, or 6) components that may weather, age or discolor due to a chemical reaction when exposed to UV, oils, heat, acid rain, atmospheric oxygen and some salts.
ANY IMPLIED GUARANTEES, INCLUDING WITHOUT LIMITA TION THE IMPLIED GUARANTEES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LI MITED TO THE DURATION OF THIS LIMITED GUARANTEE. OTHERWISE THE REPAIR OR REPLACEMENT, AS PROVIDE D UNDER THIS LIMITED GUARANTEE, IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER GUARANTEES, EXPRESS OR IMPLIED. IN NO EVENT SHALL NICOLAS HOLIDAY LTD. BE LIABLE, WHETHE R IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE P RODUCT, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND, ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE PRODUCT TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied guarantee, so the above limitations or exclusions may not apply to you. This Limited Guarantee gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.
GE is a trademark of General Electric Company and is under license by Nicolas Holiday Limite d © 2023 Nicolas Holiday Ltd.

References

• The home for holiday lighting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>