SUR D50 RGB Floor Lamp User Manual

June 14, 2024
SUR

SUR D50 RGB Floor Lamp User Manual

SUR D50 RGB Floor Lamp.JPG

Technical Parameters

FIG 1 Technical Parameters.JPG

Product Advantages

FIG 2 Product Advantages.JPG

Accessories List

FIG 4 Accessories List.JPG

FIG 5 Accessories List.JPG

Installation Notes

FIG 6 Installation Notes.JPG

FIG 7 Installation Notes.JPG

FIG 8 Installation Notes.JPG

FIG 9 Installation Notes.JPG

Repeat the above operation to assemble the two sets of lamps.

FIG 10 Installation Notes.JPG

FIG 11 Installation Notes.JPG

Product Overview

  1. Built-in MEMS microphone, real-time acquisition of music and
    environmental sound intensity.

  2. LED Strip Light sync to music , contains a variety of musical rhythm modes.

  3. 1nfrared Remote Controller Control(Optional).

  4. Press key to switch color and mode.

  5. Control by SmartLife APP.

  6. Works with Amazon alexa and Google home and so on.

Product Parameter

FIG 12 Product Parameter.JPG

Software Manual

Download and Install App
Use your phone to scan the QR code below or search “Smart Life” in application marker to Download and install the App


Register/Login/Forget password
Register:Register your account to the following tips before using at the first time.
If you have an account,please enter the password to login directly.
Login:input the correct account number and password to login.
Forget your password: You can enter the login page to retrieve your password

FIG 14 Forget password.JPG

Bluetooth distribution mode

  1. Turn on the WiFi and Bluetooth functions of the mobile phone
  2. Open the Smart Life app, which will automatically identify new devices  and pop up a dialog box,

The details are shown in the figure below:

FIG 15 Bluetooth distribution mode.JPG

After the device is installed, if the mobile phone is disconnected from the WiFi network, the mobile phone can also be connected to the device through Bluetooth for control.

Add Device-AP mode

In the main application page,click on the top right corner “+” to next window page and then choose Lighting,as shown below.
In normal mode, click on the top right corner “AP Mode” to AP Mode window page.
In AP Mode,please confirm that the device red light is slowly blink and then into the next step.

Note:
If the light in quickly blink,just press the controller with 5-10 seconds again, and the red light will slowly blink.
If the light neither slowly blink nor quickly blink.First press the “mode” key of the controller with 5-10 seconds to keep the red light in the quickly blink
Second release the button and then press the controller with 5-10 seconds again,the red light will slowly blink.

FIG 16.JPG

FIG 17.JPG

FIG 18.JPG

Control Device

After the device is successfully connected, the relevant smart device will be displayed on the home page. Click to enter its control page.

Note:

  1. When the equipment is online, it supports fast operation
  2. When the equipment is offline, it displays “offline” and cannot be controlled.

FIG 19 Control Device.JPG

FIG 20 Control Device.JPG

LED strip lamp and music synchronization function
Enter the music mode and play music with any device, and the LED indicator will be synchronized with the music

Note:
The volume of the mobile phone is relatively small. It’s best to use Bluetooth audio

  1. Click Edit in the upper right corner to enter the custom scene
  2. Breathing and static music modes are suitable for light music
  3. Flash music mode is suitable for fast-paced music
  4. You can add / delete / modify the displayed color and change the speed of color switching
  5. If you are not satisfied, you can reset the settings

Works with Amazon Alexa

FIG 21 Works with Amazon Alexa.JPG

Works with Google Assistant

FIG 22 Works with Amazon Alexa.JPG

FAQ

1 .How to reset the controller?
Press the “mode” key of the controller with 5-10 seconds
2.How to get more help?

FIG 23 FAQ.JPG

1.How does the dual-mode light band use Bluetooth control?
First use WiFi to connect the device. When the WiFi router is disconnected and the network fails, wait for 3-5 minutes, and the Bluetooth connection will be automatically switched, which can be controlled by Bluetooth;

Attentions
1. Please use the product in a dry environment.
2. Please use the input voltage at DC12V,2A voltage, must not connect into 220V AC directly.
3. The product is requested common anode connection. The wrong connection will cause a malfunction.
4.1n the process of the product and software upgrade,the data and software interface listed in the text are only for description and reference.No further notify will given if there is any change.

AFTER-SALES SERVICE GUARANTEE
12-month warranty is provided for the product from the date of purchase. If you have any queries, please sign in to Amazon and contact us, or Email us via service@surled.com.
Note: An order ID with a detailed description or image is preferred when contacting our customer service, if possible.

FIG 3.JPG

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals