SUPERCHEAP AUTO 629924 Ridge Ryder 12V Control Box Owner’s Manual
- June 9, 2024
- SUPERCHEAP AUTO
Table of Contents
SUPERCHEAP AUTO 629924 Ridge Ryder 12V Control Box Owner’s Manual
SAFETY WARNING
Please read and understand the following safety information prior to using or installing the Ridge Ryder V Power Control Bo x. Adhering to the following safety warnings will reduce the risk of damage to the product or injury to persons
- The Ridge Ryder V Power Control Box requires installation into vehicle, canopy, trailer or
- similar. It is recommended that a qualified Auto Electrician is used for installation.
- Always disconnect car batteries before working on V systems. Never work with a live V system
- as this can cause injury, damage to the product or damage to the vehicleʼs electrical system.
- Always use appropriate personal protective equipment when using power tools.
- Keep children and pets away from the Ridge Ryder V Power Control Box.
- Do not insert any body parts or tooling in the V components.
- Do not expose the Ridge Ryder V Power Control Box to wet weather.
- Ensure any exposed wires are covered.
- Ensure any input wiring is sufficiently insulated and protected from abrasion.
- Ensure input cables are adequately fused. Follow the instructions in this manual or contact a
- qualified auto electrician for correct fuse sizing.
- In order to prevent an accumulation of heat provide as much ventilation aspossible when installing.
SPECIFICATIONS
Unit Dimensions: mm (L) x mm (W) x mm (H) Includes:
- AMP Plugs (AWG Wiring and A Circuit Breaker) flush mounted into bottom of the
- unit – ideal for quick connect charging (including solar) or V plug in applications
- On/Off Rocker Switches with LED Colour Indicators (AWG Wiring)
- Way (P ATP) Fuse Block with Fault Indicator
- LED Digital Voltmeter Display
- USB Socket with both A and .A Connections
- A V Sockets with Covers
WIRING INSTRUCTIONS
This Ridge Ryder V Power Control Box has pre-built V control system – ready to install.
- Remove the Ridge Ryder V Power Control Box from the packaging, check that all items have been supplied (x V Power Control Box, x Sticker Sheets, x Owners Manual).
- Unscrew the x Philips head screws holding the lid onto the box using a screwdriver.
- Ensure all wiring is connected properly and no internal terminal studs are loose.
- See wiring diagram below to connect the input cables from the battery to the red and black busbars.
- The input cables from the battery should be run through the provided side grommets in the Ryder Ridge V Power Control Box.
It is recommended that a fuse is installed (not supplied) in the main line
within cm of the battery connection to prevent any possible damage/electrical
faults to the vehicle.
TROUBLESHOOTING
- If no power is being received through the AMP plugs, press the Amp resettable circuit
- breaker switches to reset off and on again.
- If no power is being received through the V or USB sockets, check the fuses in the fuse block for
- fault and replace if necessary
Costumer Support
PLU: 629924
CODE: PB2105 – SCA
Manufactured and Packaged for
SRGS PTY. LTD.
ABN: 23113230050
Coulthards Avenue, Strathpine,
Queensland , Australia.
MADE IN CHINA.
