xtrom XP500 Portable Power Station User Manual
- June 3, 2024
- xtrom
Table of Contents
xtrom XP500 Portable Power Station
LiFeP04 614Wh (19.2V/32Ah)
324x197x185mm
8kg
DC 6.5mm input port 11-26V, 96W Max
Solar Charging (PV) 12-26V, 200W max
USB-C PD input/ouput 60W
Output AC 2x 230V/50Hz – 500W max
Output 2x DC 5.5mm port 12V/5Ą, 60W max
Output Car charger 2V/10A, 120W max
Output USB 2x USB-A 5V/3.1A
1x USB-A QuickCharge 3.0 18W
Max output: 500W
AC power cord, Car Charger, MC4 > Anderson (PV),cable pouch, manual
A. DC 6.5mm input port:
11-26V, 96W max
Output 2x DC 5.5mm port:
12V/5A, 60W max
B. Output Car charger:
12V/10A, 120W max
C. 2x USB-A (5V/3.1A)
D. 1x USB-A QC 3.0 18w (5V.3A,
9V/2A, 12V/1.5A)
E. 1x In/Output USB-C PD 60W (5V/3A,
9V2.22A, 12V/1.5A)
F. Output AC 2x 500W (230V/ 50Hz)
HOW TO USE THIS POWERSTATION
Press the button on the output you want to use
FOR USB/DC OUTPUT:
Press 1 second
FOR AC OUTPUT:
Press 2 seconds
The output is working whe the green light turns on. You can now use this output
TIP: when not using an output, turn it off to save energy.
CHARGING FROM WNALL CHARGER:
Use the included AC charging adapter to connect to the 6.5mm DC input port.
(max 96W)
You can also connect a use a USB-C PD charger to the USB-C port. (max 60W)
CHARGING FROM A SOLAR PANEL
Connect your Solar Panel to the powerstation via the included MC4 to Anderson
cable.
This way you can recharge with up to 20OW!
IMPORTANT NOTE:
When using a Solar Panel to recharge the Power Station, make sure the power
does not exceed 26V,If more power is Used it can cause serious damage to the
unit.
RECHARGING THE POWER STATION
The Power Station is fully charged when the LCD display shows 100%.
Please don’t use this product with a extension cord with multiple AC outputs. A short-circuit could lead to damage.
Included in the box
When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.
FAQ&Troubleshooting
Specifications
Recharging the Power Bank
CHARGING FROM WALL CHARGER:
Use the included AC charging adapter to connect to the 6.5mm DC input port.
(max 72W). You can also connect a use a USB-C PD charger to the USB-C port
(max 60W).
Warnings
Don’t drop, disassemble or attempt to repair the charger by yOUrself. Avoid
exposure to water or high humidity. Don’t expose, to any heat source. Keep out
of reach of children
Don’t use in the presence of flammable gas.
Telco Accessories has tested the product in a test environment. All
statements/declarations made by Telco
Accessories about the (operation) of the product are based on the results
obtained from such tests. These results/statements/declarations cannot be
guaranteed, for example in cases of deyiating or injudiCious Use and/or use In
a diffe Copyfish
EU DECLARATION OF CONFORMITY
(In accordance with EN ISo/IEC 17050-1)
Hoofdveste 19
3992 DH Houten
The Netherlands
T:+31 (0) 30 635 4800
F: +31 (O) 30 635 4801
www.xtorm.eu