Sur La Table SLT-2201 Flexblend Hot and Cold Blender User Guide

Table of Contents

Sur-La-Table-SLT-2201-Flexblend-Hot-and-Cold-Blender-
product

Sur-La-Table-SLT-2201-Flexblend-Hot-and-Cold-Blender-
fig-1

Filler Cap: Use to stop emerging steam and splashing drinks.
Jar Lid: Equipped with a magnet inside. Make sure to align the arrows on the lid “ ” and the glass jar “ ” for the blender to work.
Jar Lid Sealing Ring: Used to seal the lid and the jar to prevent food from spilling out. Removable for cleaning.
Glass Jar: 56 oz. capacity for cold drinks and 46 oz. capacity for hot drinks.
Blender Blade: Thick stainless steel material, used for crushing food.
Control Panel: Used for preset and manual operation of the blender.
Motor Base: Equipped with motor and heater.
Travel Mug Lid: Place on the Travel Mug after blending for on-the-go use.
Travel Mug: Use for on-the-go smoothies.
Cleaning Brush: Used to clean the inside of the Glass Jar and Travel Mug.
Tamper: After putting the ingredients into the blender, use the tamper to press the ingredients properly, so that the blender can crush the ingredients more evenly. Be careful not to hit the blade when using it.
Scraper: It is used to scrape the food residues stuck on the wall of the Glass Jar or Travel Mug.
Travel Mug Blade Assembly: Twists onto the Travel Mug to blend directly into the Travel Mug.
Travel Mug Base: Used to support the Travel Mug Blade Assembly.

IMPORTANT: Review all warnings on pages 4–5 before proceeding.

Plug-in base and place on a clean, dry, level surface such as a countertop or table.
Lower the Glass Jar onto the motor base making sure the Glass Jar’s handle is to the right and is placed securely on the base. (Figure 1)
Add ingredients, making sure to not exceed the max ﬁll lines on side of Glass Jar. In HEAT mode, do not exceed the level labeled “Soup.” In BLEND mode, do not exceed the level labeled “Cold.” (See Figure 2)
To lock the Jar Lid on the Glass Jar, place the Jar Lid’s tab to the right of the handle. Then, press the Jar Lid down until it is secure. Rotate the tab clockwise so the arrow on the Jar Lid tab aligns with the arrow on the glass jar’s handle (Figure 3). Secure the center cap by placing it down into the Jar Lid and twisting clockwise until it clicks into place. (Figure 4)
To remove the jar lid from the Glass Jar, rotate lid counterclockwise out of the lock position and lift up.
NOTE: After using programs with heated functions, beware that steam may release as the Jar Lid is removed. Carefully unlock the Jar Lid and lift it directly up.

Place the Travel Mug Base on the blender’s Motor Base. (Figure 5)
Fill the Travel Mug with your favorite smoothie ingredients. Then, secure the Travel Mug Blade Assembly onto the Travel Mug. See Additional Assembly Information for additional guidance.
Align the on the Travel Mug with the unlocked icon on the Travel Mug Base. Then, twist the travel mug counterclockwise towards the locked icon to lock it into place. (Figure 6)
Press the “Smoothie” or “Travel Mug” function to blend. Once the preset time has elapsed, the blender will automatically stop.

Line up the triangle symbol ( ) on the travel mug blade assembly with the locking notch on the Travel Mug. Twist the Travel Mug Blade Assembly clockwise to secure it to the Travel Mug. Ensure the Travel Mug Blade Assembly is fully tightened before placing on the Travel Mug Base.
Align the arrow mark with the unlock symbol when placing the Travel Mug into the Travel Mug Base.
Turn the Travel Mug counterclockwise. The arrow mark should align with the locked symbol. DO NOT over-tighten.