Sur La Table SLT-2208 High Speed Blender User Guide
- June 9, 2024
- Sur La Table
Table of Contents
Sur La Table SLT-2208 High-Speed Blender
WHAT’S IN THE BOX
- TIGHT-SEAL BLENDER ID
- HANDLE
- LED CONTROL PANEL
- SUCTION BLENDER FEET
- BLENDER BASE AND MOTOR
- 6-STAINLESS STEEL
- SHARP BLADES
- 64-0Z. TRITAN JAR, BPA FREE
- MAX FILL LINE
- REMOVABLE MEASURING CUP
FEATURES
- 1200 Watts of Power
- Smoothies, Juices, Purées, Food Prep and More
- 64-0. Tritan Jar, BPA Free
- PULSE Control
- To achieve desired texture
- SMOOTHIE Control
- ICE Crush Control
- 3 Speed Setting
- Low, Medium and High
- 6 Stainless Steel Sharp Blades
QUICK START GUIDE
-
Before first use, hand wash with mild soop Removable Measuring Cup, Lid, Tritan Jar andBlodes with a brush. WARNING: Be Careful, blades are very sharp! Rinse well ol parts and dry.
-
Ploce Blender Base on a sturdy horizontal surfoce and press base down so that the four Suction Blender Feet secure the blender in pace.
-
Assemble all parts washed in step l onto Blender Base
-
Insert the power plug into a power outlet.
NOTE: The control Panel turns on for 2 seconds then turns off, and the blender is in standby mode. If the blender is not in operation mode for
3 minutes, the blender will be dormant. To activate the blender again, it MUST be replugged or Jar removed and placed back onto the Blender Base again. -
Remove Lid, add liquid ingredients first, then follow with solid ingredients in small pieces then frozen ingredients. NOTE: This will provide more consistent blending and prevent unnecessary stress on the motor. The food-to-liquid ratio is 2:3 and the number of ingredients should NOT exceed the MAX level as indicated on the Jar. WARNING: Always remove the core from fruits, and vegetables and cut into small pieces. Never use boiling or hot liquids or run the blender empty.
-
Place Measuring Cup and Lid back on the Blender Jar
-
Press the START/STOP button, then choose from the 6-function controls, PULSE, LOW speed, MEDIUM speed, HIGH speed, SMOOTHE control or KCE crush control. Press the START/STOP control a second time to stop the blender’s operation.
IMPORTANT OPERATING TIPS
- For quick or delicate blending tasks, press the PULSE control and hold for a few seconds and then release. Operate several times until the consistency you want is obtained.you want to add ingredients while the High-Speed Blender is operating, remove the
- Measuring Cup and ploce ingredients through the Lid opening.
- When crushing ice or hard food, keep one hand firmly on the Lid.
- WARNING: For each use, the consecutive operation time should be less than 3 minutes.
- At least 10 minutes rest time MUST be maintained between two continuous cycles. Let the blender cool down to room temperature before performing the next operating cycle.
- If you want to stop the blender during operation, press the START/STOP control at any time.
- Always pour liquids into the jar first and then the solids for better blending results and less stress on the motor.
- Some tasks that cannot be performed efficiently in a blender are beating egg whites, whipping cream, mashing potatoes, grinding meat, mixing dough, and extracting juice from fruits and vegetables.
- WARNING: The following items should never be placed in the blender as they may cause damage: bones, large pieces of solid, frozen food, or tough foods such as turnips.
- TO DISLODGE FOOD: Use a plastic spatula to help remove food lodged around the blade assembly. DO NOT USE SPATULA UNTIL YOU HAVE TURNED THE BLENDER OFF. Replace the Lid, Removable Measuring Cup and continue blending, if necessary.
- Make sure spatula is NOT inside the Blender Jar before blending.
- WHEN BLENDING IS FINISHED: Press the START/STOP control and unplug the blender from the electricol outlet
- Never remove the Blender Jar from the jar pod until the blender is off. Simply lift Blender Jar from
- Jar Pad.
- Do NOT put hands into Blender Jar with blender plugged in
- In the event, the blender loses power and shuts off, simply unplug the blender, and then plug it back in. Press START/STOP control to power the blender on.
- If the blender has overheated, let it cool down (15 minutes) before powering on again.
START/STOP PUSH CONTROL: In standby mode, the indicator is off, press the button, the indicator turns on. The High Speed Blender doesn’t work until any functional button is pressed. In working mode, the High Speed Blender can be stopped by pressing this button, and then the blender will be in standby mode.
PULSE PUSH CONTROL: Press the button without releasing it, the indicator turns on and the High Speed Blenderstarts to work. H the button is released, the indicator will turn otf and blender will stop; it the button is pressed for over 2 minutes, the High Speed Blender will stop automatically.
ICE CRUSH CONTROL: Press the button, the indicator turns on and the High Speed Blender starts the ice crushing mode. The High Speed Blender will stop automatically after I minute. The indicator will blink 3 times before it turns off; you can pause it by pressing it again during blender operation.
SMOOTHIE CONTROoL: Press the button, the indicator turns on and the High Speed Blender starts the smoothie mode. I he High Speed Blender stops automatically atter I minute. Ihe indicator will blink 5 times betore it turns ott; you can pause it by pressing it again during the blender operation.
LOW-SPEED CONTROL: Press the button, the indicator turns on and the High Speed Blender start to work at the lowest speed. The blender stops automatically after 2 minutes and the indicator starts to blink 3 times before it turns off; you can pause it by pressing it again during blender operation.
MEDIUM SPEED CONTROL: Press the button, the indicator turns on and the High Speed Blender starts to work at the medium speed. The blender stops automatically after 2 minutes. The indicator will blink 3fimes betore it turns oft; you can pause it by pressing it again during blender operation.
HIGH-SPEED CONTROL: Press the button, the indicator turns on and the High Speed Blender starts to work at the highest speed. The blender stops automatically after 2 minutes. The indicator will blink 3 times
NOTE: During bender operation, you can automaticlly switch from one function to the next by pressing that button.
Scan Here to Learn More
WARRANTY
- 1 YEAR LIMITED
Customer Service:877-246-0990 – Appliance Support@monchateau.us
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>