Anqier A9 Business Bluetooth Headset User Guide

BUSINESS BLUETOOTH HEADSET
A9 User Guide

Need any help?
We’te happy to assst you whenever you need us.
Email us at: service@vicimwann.com
We’re borh the seller and mannfacturer and can help you Solve the problem a the fastest speed o save you some beadaches!

How to Wear?

A proper fit on your head is important for both comfort and optimal sound quality.
Here are some guidelines:

1. Reversible wearing style: The A9 can be wom on the left or right by flipping the microphone to the other side.
2. Rotate the eartip and adjust the retractable earhook to fit the shape of your ear.
3. Adjust the boom. For better voice capture, it is recommended to position the microphone close to the corner of your mouth.

What’s in the Box

Package Cantents:
A Headset x 1
B. Type-C Charging Cablex1
C. Eartips x 6 (Includes one on headset)
D. User Manual x 1

Product Overview

1. Multi-Function Button(MFB)
2. Volumer+
3. Volume-
4. LED Indicator
5. Charging Port
6. Microphone

Basic Operation

NOTE:
: Powe On
: Answer a call
: Volume down
: Previous track
: Single click
: Power Off
: Hang up a call
: Next track
: Mute on/off
: Long press
: Play/Pause
: Reject a call
: Volume up
: Siri
:Double click

LED Indicator

• Power on: LED fashes green for 1s
• Power off: LED flashes re for 2s then turns off
• Pairing mode: LED flashes green & red sltemately
• Connected: Green and red light tuns off
• Charging status: Red ight on
• Charging complete: LED flashes green for 5 then turns off
• Low battery: Red light on with a voice prompt
• Reset: LED flazhes green 2 times(Press and hold the power buttton for § seconds while charging)

Voice Prompts

Basic Specifications

Bluetooth Pairing and Connection

A. Getting Paired

1. Turn on the headset, the headset will enter pairing mode.
2. Turn on the Bluetooth of your devices and search for the model name “AQ” to connect. When pairing is complete, you will hear a voice prompt saying “connected”.

B. Pairing with 2 Devices Simultaneously

1. Follow the pairing procedure s instructed in part *Getting Paired” to pair the headset with the 1st Bluetooth device.
2. Tur off the Bluetooth of your 1st device. The headset will enter pairing mode.
3. Repeat the pairing procedure to pair the 2nd Bluetooth device.
4. Turn on Bluetooth of your 1st device, click to reconnect to “A9” on the Bluetooth list.
5. Now you can operate two devices through one headset

Tip:
Turn the headset off and then turn on again. The headset will automatically connect to the 2 devices at the same time.

Charging the Device

Notes!

• Make sure charger and cable are fully cry before charging.

• Warning! Charging voltage is: 4.2-5V. No more than 5!
  Voltage over 5V will damage the battery.

• Charging input: 5V DC/above 500mA

• Use a centifid TYPE-C charging cable and charger to prevent any damage.

• Tocare for the headset better,we do not recommend you charge itvia car charger or power bank.

• Please tum off the headset when you are not using it o care. for the headset better.

• Please charge the A9 at east once every 2 months when ot in use.

FCC Statement

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has evaluated to meet general RF exposure requirement.
The device can be used be in portable exposure without restriction.
WARRANTY
Contact us via email or Facebook with your Amazon order number to active below benefits:

1. Lifetime Warranty Extension
2. Support refunding or replacing at NO COST for defective products even if Amazon’s one-month return window is closed.
3. 24/7 technical support for any issues.

Email: service@vicimwann.com
Facebook: @vicimwann

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>