Shenzhen Anqier Trading Technology A18 Business Bluetooth Headset User Manual
- June 9, 2024
- Shenzhen Anqier Trading Technology
Table of Contents
Shenzhen Anqier Trading Technology A18 Business Bluetooth Headset
Features
- Built-in intelligent voice prompts
- Built-in high-definition microphone, advanced 4X noise cancelling technology.
- Ergonomics, lightweight design. 180-degree rotatable apply to both left and right ears.
- Compatible with all Bluetooth-enabled devices and high-fidelity stereo music player
Product Specifications
- Headset battery capacity: 200mAh
- Talk time: 14hours
- Music play time: 12 hours
- Headset charging time : about 2 hours
- Standby time: 360 hours
- Bluetooth Version: V5.0
- Operating Range: up to 33 feets (without obstacle)
- Support HFP. HSP, A2DP and AVRCP profiles
- Working environment -10-50 C
Voice Prompts
- When the headset is on, there will be the automatic voice prompt: power on
- When the headset is off, there will be the automatic voice prompt: power off
- When being connected successfully, there will be automatic voice prompt: your headset is connected
- When being disconnected, there will be automatic voice prompt: your headset is disconnected
Package List
Product Overview
- MFB
- LED Indicator
- Volume+/pre track/Mute switch
- Volume-/next track
- ON/OFF
- Intelligent noise canceling mic
- Charging port
Key Functions
DMFB
- Answer/End Calls: Single click “MFB
- Reject Calls: Press ‘MFE for 3S
- Siri for iPhone: Quickly tap ‘MFB twice
- Play/Pause: Single cliek MFB under music play status
LED Indicator
- Pairing status: Red and blue light flashing alternately
- Pairing successfully: Light turns off
- Charging status: Red light keeps on
- Charging complete: Red light change blue light, then turns off
- Low battery: Red light turns on with indicate voice
Volume+/pre track/Mute switch
- Volume: Single click V+
- Next Track: Press Vfor 25
- Mute On/off: Press V+ for 2S switch during a call
Volume-/next track
- Volume- Single click V-
- Previous Track Press V- for 2S
ON/OFF
- Power On: Puil the switch to the ON side. red and blue blight blinks alternately
- Power Off: Pull the switch to the OFF side.red light keep on and tuns off
Headset Pairing
- Turn on the headset, and then the headset will enter into pairing mode
- Turn on the devices Bluetooth and search for A18 to connect
Warranty
- We provide 30 days money back warranty
- We provide 7*24H warranty service
- After-sale email: [email protected]
FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet the general RF exposure requirements. The device can be used be in portable exposure without restriction. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.