BMOSTE 820 Wireless HDMI Transmitter and Receiver User Manual

Table of Contents

Thank you for choosing our products!

For your better use of this product, please read this manual carefully before using ii. This product is for household use only. If there is any malfunction, please repair it in time.

Please adjust the video output signal of the playback device to 720p or 1080p.
Please put TX or RX in an open place and keep a distance of 2-3m from the wireless router to avoid signal interference.
When transmitting PC video and audio signals, some PC operating
If noise occurs during use, switch the audio setting of the signal output device to stereo output.
It supports 1 transmitter for wireless transmission and 2-4 receivers.
Does not support the use of multiple transmitters in the same environment.
Transmission distance is about 20-30 meters when there is no other wireless signal interference/obstacles in the operating environment.
The hue, saturation, and brightness of the picture output by the receiver are different in various TVs, projectors and other equipment. You can adjust the TV HSB parameters according to your preferences.
Please uses a 5V power adapter, a higher power adapter such as 9V or 12V will damage the product.
We provide a 1-YEAR REPLACEMENT GUARANTEE. Please have your proof of purchase & pie of the defective product available when you contact us.
If the product you received is defective, missing accessories or you need assembly assistance,

PLEASE DON’T RETURN IT TO THE STORE

BMOSTE-820-Wireless-HDMI-Transmitter-and-Receiver-010

Receiver(RX) Panel Description

BMOSTE-820-Wireless-HDMI-Transmitter-and-
Receiver-011 INSTALLATION INSTRUCTIONS

Part of computers do not have enough power to the USB port to support the device working, so using a 5V=1A USB power adapter is recommended.
To avoid signal reception problems caused by obstruction, it is recommended to use an HDMI extension cable to connect the Receiver (RX) and the TV.
Part of devices do not have enough power to the USB port to support the device working, so using a 5V=1A USB power adapter is recommended.

After entering the computer system, press the Windows key and the letter P key on the keyboard at the same time. The projection menu bar will appear on the right side of the screen, click Duplicate.

Tum on the setting function of STB and switch HDMI Audio output to LPCM 2 Channel through Audio setting.
Please Support Environment Protection Waste electrical products should not be disposed of household wants. Please put them to the recycle facilities. Check with your local authority or retailer for recycling advice!