reolink RLC-542WA PoE IP Camera User Guide
- June 14, 2024
- reolink
Table of Contents
reolink RLC-542WA PoE IP Camera
What’s in the Box
NOTE:
- The power adapter, antennas and 4.5m power extension cable only come with WiFi camera.
- Quantity of accessories varies with the camera model you purchase.
Camera Introduction
PoE Camera
Connection Diagram
Before initial setup, follow the steps below to connect your camera.
- Connect the camera to a LAN port on your router with an Ethernet cable.
- Use the power adapter to power on the camera.
NOTE: The connection diagram takes the WiFi Camera as an example and also
apply to the PoE camera. For PoE Camera, please power the camera with a PoE
Switch/Injector/Reolink PoE NVR or a DC 12V power adapter. (not included in
the package)
Set up the Camera
Download and launch the Reolink App or Client software, and follow the onscreen instructions to finish initial setup.
On Smartphone
Scan to download the Reolink App.
On PC
Download path of the Reolink Client: Go to https://reolink.com > Support >
App & Client.
NOTE
- When setting up the WiFi camera, you need to follow the onscreen instructions to finish the WiFi configuration first.
- If you are connecting the PoE camera to a Reolink PoE NVR, please set up the camera via the NVR interface.
Mount the Camera
Installation Tips
- Do not face the camera towards any light sources.
- Do not point the camera towards a glass window. Or, it may result in poor image quality because of the window glare by infrared LEDs, ambient lights or status lights.
- Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may result in poor image quality. To ensure the best image quality, the lighting condition for both the camera and the captured object shall be the same.
- To ensure better image quality, it’s recommended to clean the dome cover with a soft cloth from time to time.
- Make sure the power ports are not directly exposed to water or moisture and not blocked by dirt or other elements.
- With IP waterproof ratings, the camera can work properly under conditions like rain and snow. However, it doesn’t mean the camera can work underwater.
- Do not install the camera at places where rain and snow can hit the lens directly.
- The camera may work in extreme cold conditions as low as -25°C. Because when it is powered on, the camera will produce heat. You may power on the camera indoors for a few minutes before installing it outdoors.
Install the Camera
- Put the mounting template on the ceiling and drill holes at the indicated locations.
- Screw the dome cover off with the mounting wrench.
- Screw the camera to the ceiling.
- Loosen the two screws on both sides of the camera and adjust the camera viewing angle.
- Tighten the screws and screw the cover back to the camera.
NOTE: The installation methods take the PoE camera as an example and also apply to the WiFi camera.
Troubleshooting
The camera is not Powering on
If your camera is not powering on, please try the following solutions:
For PoE Camera
- Make sure your camera is powered on properly. The PoE camera should be powered by a PoE switch/injector, a Reolink NVR or a 12V power adapter.
- If the camera is connected to a PoE device as listed above, connect it to another PoE port and check again.
- Try again with another Ethernet cable.
For WiFi Camera
- Plug the camera into a different outlet and see if it works.
- Power on the camera with another working 12V 1A DC adapter and see if it works.
If these won’t work, contact Reolink Support.
The picture is not clear
If the picture from the camera is not clear, please try the following
solutions:
- Check the camera dome cover for dirt, dust or spiderwebs, please clean the dome cover with a soft, clean cloth.
- Point the camera to a well-lit area, the lighting condition will affect the picture quality a lot.
- Upgrade the firmware of your camera to the latest version.
- Restore the camera to factory settings and check out again.
Specification
Hardware Features
- Infrared Night Vision: Up to 30 meters(95ft) Day/Night Mode: Auto switchover
- Angle of View: Horizontal: 90°~31°, Vertical: 67°~24°
General
- Dimension: Φ133×100 mm
- Weight: 685g
- Operating Humidity: 10% ~ 90%
- For more specifications, visit https://reolink.com/.
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: The following notes are only for WiFi camera. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television, reception, which can be determined by turning the equipment off and on, the user is encouraged to try to Operate Temperature: -10°C~+55°C (14°F~131°F) and correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Simplified EU Declaration of Conformity
Reolink declares that the WiFi camera is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, the PoE camera is in compliance with Directive 2014/30/EU.
Correct Disposal of This Product
This marking indicates that this product should not be disposed of with
other household wastes. throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling.
Limited Warranty
This product comes with a 2-year limited warranty that is valid only if
purchased from the Reolink Official Store or a Reolink authorized reseller.
Learn more: https://reolink.com/warranty-and-return/.
NOTE: We hope that you enjoy the new purchase. But if you are not satisfied with the product and plan to return it, we strongly suggest that you reset the camera to factory default settings before returning it.
Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of reach of
children.
End User License Agreement
By using the Product Software that is embedded on the Reolink product, you
agree to the terms of this End User License Agreement (“EULA”) between you and
Reolink. Learn more: https://reolink.com/eula/.
ISED Radiation Exposure Statement (For WiFi Version)
The WiFi camera complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
OPERATING FREQUENCY (For WiFi Version) (the maximum transmitted power)
- 2412MHz — 2472MHz (19dBm)
- 5150MHz — 5350MHz (18dBm)
- 5470MHz — 5725MHz (18dBm)
Technical Support
If you need any technical help, please visit our official support site and
contact our support team before returning the products,
https://support.reolink.com.
References
- Reolink Official: Security Cameras and Systems for Home & Business
- Reolink Official: Security Cameras and Systems for Home & Business
- Warranty & Return – Reolink
- Reolink Support - Official Reolink Help Center