BORMANN BBP2008 Charger 12V 2.4A User Manual

June 4, 2024
BORMANN

BORMANN BBP2008 Charger 12V 2.4A User Manual

BORMANN BBP2008 Charger 12V 2.4A - overview

BORMANN BBP2008 Charger 12V 2.4A - figure 1,2

Read and understand the operating instructions before using the appliance. Get familiar with the control elements and how to use the appliance properly. Abide by all the safety measures state in the service manual.
Act responsibly toward third parties.
The operator is responsible for accidents or risks to third parties.
In case of any doubts about connection and operation refer please to our customer center.

Safety Instructions

WARNING!

Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury Save all warnings and instructions for future reference.
Children over the age of 8 and persons with reduced physical, sensory or mental capabilities or with a lack of experience and / or knowledge may only use the machine when supervised or after being instructed on the safe use of the machine and understanding the risks arising from such use.

WARNING!

Charging any Other battery is not allowed. Single-use batteries must not be charged with the charger.
Do not use this product in any stated for normal use. Not observing general in force and instructions from this manual does not make the manufacturer liable for damages.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down.
If you seek help, state the following pieces of information: 1. Accident site, 2. Accident type, 3. Number of injured persons, 4. Injury

Charging station

No metal parts may enter the shaft to slide the battery (risk of short circuit).
Never use the charger moist or wet conditions. Suitable for indoor areas only.
Make sure the system voltage corresponds to the charger type plate details. There is a risk of electric shock.
Cable connections to be separated by pulling the plug only. Pulling the cable could damage both the cable and plug. As a result, electric safety would no longer be guaranteed.
Never use the charger when the cable, plug or the machine is damaged by external influences.
In case of damage, deliver the product to an authorized service center.
Make sure the cooling function is not limited by covering the cooling slots. Do not operate the appliance near heat sources or on a flammable surface.
Never open the charger. Contact a specialised workshop in case of any defect.
The Bormann charger to be used only to charge the battery. There can be malfunction or fire if different chargers are used.
The outer battery surface must be clean and dry before the battery starts to get charged.

Battery

Vapours may leak out in case of unauthorised use or when using a damaged accumulator.
Bring fresh air and seek medical advice if experiences difficulties. Vapours may irritate the respiratory system.

WARNING!

RISK OF FIRE! RISK OF EXPLOSION!

Never use damaged, defective or deformed accumulators. Never open or damage the accumulator or let it fall on the ground.
Never charge the battery in an environment with acids and easily flammable materials.
Protect the battery against heat and fire.
Protect the battery against moisture and liquids.
Battery to be used at the ambient temperatures between 10oC and +40oC only.
Never put the battery on heaters and do not expose it to strong sunlight for a long time.
After being subject to heavy load, let the battery cool down first.
Short circuit-do not bridge the accumulator contacts with metal parts.
The accumulator must be packaged (plastic bag, box) or accumulator contacts must be sealed up for accumulator disposal, transport or storage.

Work instructions

Accumulators are supplied partially charged and must therefore be fully charged before being used the first time.
Charge the accumulator when the appliance is running slowly or it stops.
A li-ion battery maybe charged at any time without any shortening of its life. Charging process interruption will not damage the accumulator.
A li-ion battery is protected by the electronic cell protection against deep discharge.
A significantly shorter operating time of a charged battery means the battery life is over and the battery must be replaced.
Original spare batteries to be used only.

Disposal

The disposal instructions are based on the icons placed on the appliance or its package.
Any damaged or disposed devices must be delivered to appropriate collection centres.
Dispose off the batteries in an environmentally friendly manner.
Li-ion batteries are subject to the disposal obligation. Have any defective batteries disposed off by a specialised shop. The battery must be taken out before the appliance is scrapped. Damaged batteries may harm the environment and your health if toxic vapours or liquids leak out of such batteries.
Therefore, never send a defective battery by post, etc. Please contact your local recycling centre.

Dispose the batteries when they are no longer functional. We recommend applying an adhesive tape on the poles to protect them against short circuit.
Never open the battery.

Transport packaging disposal

The packaging protects the machine against damage during transport materials are usually chosen based on environment aspects and waste treatment principles and are recyclable. Returning the packaging into material circulation saves raw materials and reduces waste production. Parts of packagings (e.g. foils, styropor) can be dangerous for children.

Risk of suffocation!

Keep parts of the packagings out of reach children and dispose them soon as possible.

Symbols

BORMANN BBP2008 Charger 12V 2.4A - Symbols

  • The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.

  • Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.

  • To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

www.bormanntools.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals