Instant Care 900z Transmitter Instructions

June 14, 2024
INSTANT CARE

Instant Care 900z Transmitter

Product Information

Specifications:

  • Model: 900zTX
  • Emergency Button/LED: 1
  • Battery: CR2032, 3V 230mAh
  • Battery Life: ~3 years
  • Frequency: 902-928MHz
  • Open Field Range: ~900ft

Product Usage Instructions

Learning-in the 900z Transmitter:
Please refer to your base station’s user guide for instructions on learning in your Halo transmitter.

Operation:
To transmit a panic message:

  1. Press and release the Emergency button.
  2. The RED LED will blink.
  3. The message will be transmitted to the Control Panel.

Sleep Mode:

  • The Halo Transmitter ships in Sleep Mode to conserve battery life during initial shipment.
  • To exit sleep mode, press and release the emergency button.

LEDs:

  • The red LED indicates a good pendant battery.
  • Green LED indicates the message cleared.

Low Battery Status:
When the battery voltage is below the threshold, the Transmitter will indicate a low battery by transmitting a low battery status to the receiver every 60 minutes.

Frequently Asked Questions (FAQ)

Q: What is the FCC Statement for this product?
A: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

  • Q: What is the FCC ID for this product?
    A: The FCC ID for this product is XO8-900zTX.

  • Q: What is the revision of this product?
    A: The revision of this product is A01.

Identifying the Parts

  1. Emergency Button/ LED

Learning in the 900z Transmitter
Please refer to your base station’s user guide for instructions on learning in your Halo transmitter.

Operation

  • To transmit a panic message:
    Press and release the Emergency button, and the RED LED will blink, and transmit the message to the Control Panel.

  • Sleep Mode:

    • The Halo Transmitter ships in “Sleep Mode” to conserve battery life during initial shipment
    • To exit sleep mode, press and release the emergency button
  • LEDs:

    • Red LED = good pendant battery
    • Green LED = Message cleared

Battery & Electrical Specifications

  • Frequency: 902-928mhz
  • Battery: CR2032, 3V 230mAh
  • Battery life: ~3yrs
  • Open Field Range: ~900ft
  • Low battery status: when the battery voltage is below the threshold, the Transmitter will indicate a low battery by transmitting a low battery status to the receiver every 60 minutes.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Caution
To assure continued compliance, any changes or notifications not expressly approved by the party responsible for compliance may void the user’s authority to operate his equipment. (Example – use only shielded interface cables when connecting to computer or peripheral devices)

FCC Section 15.105 Information to the user

NOTE:
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC ID: XO8-900zTX

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals