S BAGNO Illuminated LED Bathroom Mirror 600x800mm Instructions
- June 15, 2024
- S bagno
Table of Contents
S BAGNO Illuminated LED Bathroom Mirror 600x800mm
UK: MANUFACTURER SPECIALIZED IN: LED wall-mounted vanity mirror, LED full-length mirror, LED mirror cabinet.
Technical information
Both vertical and horizontal installations are valid.
- Size: 80x60cm
- Input: 220V
- Power: 55W
- Ra: >80
- LED: SMD2835/306PCS
- Lumen: CCT: 6500K/3000K/4000K
Kits coming with the mirror
Tools needed for installation
Installation steps
-
Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
-
Use a hammer to drive the pastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the crews into the plastic anchors.
-
Connect the wall power cord to the wires behind the mirror through the junction box.
-
Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.
Instructions for use
The mirror is equipped with 3 touch sensor switches, when installation is finished and power is connected, the touch sensor light will be on, it can be turned off by a long press when the mirror light is off.
For LED Light
The first touch sensor is for the LED light, one-click for light on/off, quick clicks on-off-on for color temperature changing, and long press for dimming.
For Demister Pad
The second touch sensor is for the demister pad, before having a shower we can turn it on, and when we finish the shower, the demister pad area will be clear without any fog. Turn it off before leaving.
For Bluetooth Speaker
The third touch sensor is for the Bluetooth speaker, when the power is connected, it will have a reminder voice means that it is ready for connecting. Open the Bluetooth function from the mobile phone, we can find a signal called mirror multimedia. Click and connect then we can play music from the phone and the music will come from the speaker’s backside of the mirror. Turn it off when it is free, and avoid the neighbor connecting it by accident.
Kind reminder
Bluetooth is connectable to one device only. If you want to connect the
second device, please forget the first device.
Warning
- Disconnect from the outlet before putting on or taking off parts.
- Close supervision is necessary when this mirror is used by, or near children.
- Keep the cord away from heated surfaces.
- Make sure that the electricity is turned off at the power source before proceeding with the installation.
- Always unplug all the power supply cords before moving the product, testing the product, or repairing the product.
- Do not use outdoors.