S BAGNO 43941809 LED Mirror Instruction Manual
- June 16, 2024
- S bagno
Table of Contents
S BAGNO 43941809 LED Mirror Instruction Manual
Technical information
- Both vertical & horizontal installation are valid.
Size: 90x60cm
Input: 220V
Power: 50W
Ra: >80
LED: SMD2835/282PCS
Lumen: 1000lm
CCT: 6500K/3000K/4000K
Kits coming with the mirror
-
Expansion Tube 3+1
-
Screw 3+1
-
Junction Box 1
Tools needed for installation
-
Pencil
-
Screw Driver
-
Rubber Mallet
-
Electric Drill
-
Tape Measure
Installation steps
-
Measure the distance between the two brackets on the back of the mirror and use a level to mark the same distance on the wall.
-
Use a hammer to drive the pastic anchors into the hole drilled with an electric drill, then use the electric drill to screw the crews into the plastic anchors.
-
Connect the wall power cord to the wires behind the mirror through the junction box.
-
Align brackets behind the mirror with the screws on the wall and hang it, installation is completed.
Instructions for use
The mirror is equipped with 3 touch sensor switch, when installation finished and power connected, the touch sensor light will be on, it can be turned off by long press when the mirror light is off.
For LED Light
First touch sensor is for the LED light, one click for light on/off, quick
clicks on-off-on for color temperature changing, long press for dimming.
For Demister Pad
Second touch sensor is for the demister pad, before having a shower we can
turn it on, when we finish the shower, the demister pad area would be clear
without any fog. Turn if off before leaving.
For Bluetooth Speaker
Third touch sensor is for the bluetooth speaker, when the power connected, it
will have a reminder voice means that it is ready for connecting. Open
bluetooth function from the mobile phone, we can find a signal called mirror
multimedia. Click and connect then we can play music from the phone and the
music will come from the speakers backside of the mirror. Turn it off when it
is free, avoid the neighbour connect it by accident.
Kind reminder
Bluetooth is connectable to one device only. If you want to connect the second
device, please foget the first device.
Warning
- Disconnect from outlet before putting on or taking off parts.
- Close supervision is necessary when this mirror is used by, or near children.
- Keep the cord away from heated surfaces.
- Make sure that the electricity is turned off at the power source before proceeding with the installation.
- Always unplug all the power supply cords from before moving the product, testing the product, or repairing the product.
- Do not use outdoors.