ROCKVILLE UT65B UTV ATV 6.5 Rollbar Wakeboard Marine Speakers Swivel Mount IPX6 User Manual

ROCKVILLE UT65B UTV ATV 6.5 Rollbar Wakeboard Marine Speakers Swivel

Mount IPX6

Missing items If you ordered a bundle that includes more than one product and you are missing part of your bundle, then it just means your order shipped from two different warehouses. You will receive the remaining items very soon. If you have any concerns or inquiries, feel free to call our customer support center at 1-646-758-0144, 24 hours a day/7 days a week. WATCH THIS VIDEO BEFORE FIRST USE
Who reads manuals
Scan the QR code or go to rockvillesupport.com/ut65b to access how- to video(s), the owner’s manual, and other important information you may need to get the most out of your item. If you prefer written instructions, please read ahead! With Rockville you get many options.

Thank you for purchasing these Rockville UT658 roll bar/wakeboard tower speakers. Please read this owner’s manual carefully for the proper use of your UT658. Should you need assistance, please call our technical help line at 1-646-758-0144, 24 hours a day/7 days a week.
Includes

• Two tower speakers
• Mounting brackets and mounting hardware to fit 1.5″, 1.75″, 1.875″, or 2″
• Installation hardware
• Owner’s manual
• Warranty card

2

| Non slip rubber strip (120 x 14 x 1mm)| 4 PCS
Non slip rubber strip (130 x 14 x 2mm)| 4 PCS
3| Aluminum ring 1.75″| 4 PCS
4| Aluminum ring 2″| 4 PCS
5| M6 x 60mm screw| 4 PCS
6| Non-slip flat washer for M6 screw| 4 PCS
7| Non-slip nut for M6 screw| 4 PCS

Installation safety considerations

Please remember that these are heavy products that will be installed in a boat. These vehicles can travel at high speeds and be unstable, so please keep this in mind and use extreme caution.

• Do not mount the speaker in a location where someone could either walk into it or strike their head. During a turbulent ride, please make sure that you do not lose footing and fall or hit the unit as it may cause injury.
• Secure the wires to the speaker in multiple locations along the route to the audio source so there are no hanging wires. Having nonsecure wires, especially in low light conditions, can cuase entanglement and injury.
• Make sure to use the included rubber inserts when securing the speaker to the wake tower. Do not overtighten the clamp. After installation is complete, and before operating your vehicle or vessel, please check all bolts to ensure they are complete­ly tightened.
• Do not install these speakers where they may block the view of the operator or prevent safe operation of the vehicle or vessel.

Installation

• The two screws can be unbolted to loosen the metal base of the mounting ring to adjust the mounting angle. Make sure 1o put all components of the mounting hardware in a safe location.
• After loosening the two screws and determining the optimal angle for your speakers on the mounting bar, tighten the two screws in place to secure the metal base of the mounting ring tightly.

• Place the front rubber pad on the metal base of the mounting ring.
• Place the supplied rubber strip around the cage bar to prevent scratching. Push the aluminum ring over the cage bar. Align the aluminum ring over the cage bar. Align the aluminum rings with the metal base of the mounting rings on the waketower speaker.

• Secure the aluminum rings to the metal base using a pair of M6 x 60mm screws, M6 flat washers, and M6 locknuts as illustrated. The locknut should be installed into the hex­shaped recess on one end of each ring. Do not overtighten. To change the position of the speaker loosen the screws, adjust the speaker, then retighten the screws.
• UT65B wake tower speaker installation completed.

Speaker Dimensions

Features

• Rockville UT65B 6.5″ IPX6 UTV/ATV Roll Bar/ Wakeboard Tower Marine Swivel Mount Speakers
• Peak Power Handling: 400 Watts
• RMS Power Handling: 100 Watts
• Heavy-duty ABS enclosure
• IPX6 Water resistance rated
• Marine-grade components are protected from the elements
• The adjustable aluminum mounting bracket is strong and sturdy
• Bracket swivels 360 degrees for quick and easy speaker angle adjustment
• The bracket supports any roll bar from 1.5″ to 2″ thick
• 6.5″woofers with 11oz magnets and oversized 1.25″ Kapton voice coils
• 1″ PEI dome tweeters with neo magnets
• The shallow enclosure design is perfect for UTV, ATV, and marine applications
• Fully marinized against salt and freshwater conditions
• Completely resistant to water, rust, and UV rays
• Terminals are sealed with rubber gaskets
• Polypropylene-mica-injected cone with butyl rubber surround
• Frequency Response: 60Hz – 20K Hz
• SPL: 87dB @ 1 w/1 m
• Impedance: 4 Ohms
• Shockproof design
• ABS weather-resistant grills and hardware
• Color: Black
• Dimensions (H x W x D): 9.8″ x 7.1 T x 7.52″

RockvilleAudio.com
2022 ROCKVILLE// The information presented is subject to change and/or improvement without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>