BOSS B537 Chefmax Induction Cooktop Instruction Manual

BOSS B537 Chefmax Induction Cooktop

Dear Customer, Thank you for starting this journey with BOSS. As a brand, BOSS was never just about technology, but about the meaning that technology adds to your lives. Our products are designed around you so that you may be able to live a fuller and more empowered life. We hope you have a truly rewarding experience with BOSS. Your input and feedback are valuable to us, given we are on a quest to make life better for our family members spread all over the country. Cheers!

PRODUCT FEATURES

TECHNICAL SPECIFICATIONS

Given technical details are for information only, do not try to service your Induc on Stove by yourself, un l & unless you are instructed or trained to do so.

INSTRUCTION SYMBOLS

Meaning of Safety Instruc on Symbols

• This symbol indicates prohibited matter and those behaviors are forbidden. Non-compliance with the instructions may result in product damage or endanger the personal safety of the users
• Behaviour must be strictly executed in line with the opera on requirements. Non-compliance with the instructions may result in product damage or endanger the personal safety of the users.
• This symbol indicates matters to pay attention to and these behaviors shall be specially noted. Due precau ons are needed or minor or moderate injuries or damages of the product will be caused.
• This symbol indicates matter where specific cau ons to be kept in mind and those points shall be specially noted.

SAFETY INSTRUCTIONS

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock or to prevent property damage, personal injury or loss of life.

• Before using the appliance, check for any damage. If there is any damage, do not use the appliance and immediately contact the Retailer/ Shopkeeper.
• Do not operate the appliance with a damaged cord/ plug or is dropped and damaged in any manner. If the product requires attention within the Warranty period, call the Customer Care number.
• To protect against fire, electric shock, or injury, do not place a cord, plug or appliance in water or any other liquid.
• Do not let the cord hang over the edge of a table or touch hot surfaces.
• Do not place the appliance on or near a hot Gas/ Electric Burner/ in a Microwave/Heated Oven.
• Do not install the product in an area prone to combust gas leaks, grease or metal dust.
• This appliance is not intended to be used by people including children with reduced physical, sensory or mental capabilities or a lack of experience and knowledge unless they have been given supervision or instructions concerning the use of the appliance by a person responsible for their safety.
• To protect against electric shock, always unplug from the Outlet when not in use and before cleaning. To disconnect, remove the plug from the Outlet. Do not yank on the Cord as it may damage the Cord and eventually cause an electric shock.
• To avoid burns/cuts/risk of personal injury, use extreme caution while handling the appliance.
• Do not use for other than intended use. This appliance is intended for household use only, not for Commercial or Industrial use. Use for anything other than intended will void the Warrant.
• To avoid an electrical overload, do not operate another high-wattage appliance on the same power socket.
• The use of an accessory attachment not approved by the manufacturer may result in fire, electric shock or injury.
• Avoid contact with pets, plants, and insects when the appliance is in operation.

WARNING

• Do not keep the unit on an unstable surface when it is in use.
• Do not move the unit when a pot/pan is on it.
• Avoid contact with pets, plants and insects when the appliance is in operation.
• Ensure that the Induc on Pan is kept away from children’s reach.
• Ensure that the proper fitment of the body on the base before opera ng.
• Do not install the product where it is exposed to direct Sunlight and in a place where flammable substances like Gasoline, Propane, Paint Thinner, etc. are stored.
• Do not install the product in an area prone to combustible gas leaks, grease, or metal dust.
  • Electric Shock Hazard – If the supply Cord is damaged DO NOT USE. Any repairs to the product must be carried out by a qualified electrical person only or the product must be disposed of.

KNOW YOUR PRODUCT

1. Air Vent
2. Power Cord
3. Crystal Plate
4. Cooking Area
5. Control Panel
6. 7 Segment Display

USAGE INSTRUCTIONS

Before First Use

• Remove the packing materials from the Induc on the Stove
• Place the appliance on a dry, stable, and leveled surface.
• Make sure there is at least 10cm of free space around the appliance to prevent overheating.
• Always place for Cookware in the cooking zone during cooking.
• Make sure you use Cookware of the correct type and sizes as shown below

Note: Steel or cast iron, enameled iron, stainless steel, flat-bottom Pans /Pot with diameter from 12 to 20 cm.

Opera ng Your Induc on Stove

• Place suitable utensils in the center of the top plate.
• Insert the plug into 220 ~240 V in 10A-16A special jack, power pilot lamp flashes Induc on Stove in ready standby condi on.
• Press Func on the button to select different cooking functions, settings, and adjustments.
• To stop cooking press the “Power” button and plug out to shut off the power supply.

Control Panel Operation

After the device has been turned on, use the selectors switch to select the appropriate function for your cooking. You can also choose from a selection of pre-set functions.

• Functions: Chapati, Deep fry, Boil, curry, Saute, cooker, milk, Idli. Press the cooking function button, and the relative pilot lamp lighting, unit enters this menu of cooking functions.
• Up Adjust Button: “Up/ Increase” After the manual cooking function is selected, press “+” can increase power or temperature to a higher level During the timer setting, press “+” case increase cooking time.
• Down Adjust Button: “Down / Reduce ” After the manual cooking function is selected, pressing “-” can decrease Power or Temperature to a lower level. During timer setting, press “-” case decreases cooking time.
• Timer function : The timer function is used to set the OFF timer for the cooking menus. The cooking time range is 4 hours maximum.

Getting to Know Your Cooking Modes Refer to the below table for more details of different cooking modes.

used for deep frying. The temperature can be adjusted by +/- button.

The max temperature setting for this mode is 270

Cooker| This mode is applicable for cooking food . . The power cannot be adjusted manually in this mode.
Milk Tea| This mode is used for boiling Milk. The temperature cannot be adjusted manually in this mode. The power cannot be adjusted manually in this mode.
Boil| This mode is used for boiling Water. The power cannot be adjusted manually in this mode.
Curry| This mode is applicable for cooking food with high Heating. The power can be adjusted by +/- button.

The max temperature setting for this mode is 1800W.

power cannot be adjusted manually in this mode.
Chapati| This mode is used for making chapatti on a flat induction type tawa. The power cannot be adjusted manually in this mode.
Saute| This mode is used for making all recipes. The power cannot be adjusted manually in this mode.

USABLE and NON-USABLE COOKING UTENSILS

Usable Pans
Steel or cast-iron Enameled Iron, Stainless Steel, Flat bottom Pans / Pots with diameters 12 to 20 cm.

Non-Usable Pans
Heat Resistant glass, Ceramic Container, Copper, Aluminum pans /pots. Rounded bottom pans/pots with a bottom measuring less than 12cm.

MAINTENANCE

Caring Your Induc on Cooktop

• Remove the Plug from the power outlet and let the appliance completely cool down before cleaning.
• Clean your Induc on Stove periodically to help maintain its new appearance over the years. Use only a soft & lint-free cloth to avoid scratching the finish. Do not use water when cleaning. This could possibly cause an electric shock.
• The abrasive cleaning agent is not required and should be avoided to prevent damage of polished surfaces.

1. Use of any kind of alcohol, acetone, gasoline, abrasive cleaning agents, etc. to clean the plastic components is prohibited.
2. Do not use hard brushes or metal objects for cleaning.

Troubleshooting

Induction Stove is connected to the mains and if the plugs are inserted firmly into the wall socket.
2| The appliance beeps continuously and then stop working.| May have put unsuitable Cookware on the cooking plate or the wrong material

Cookware.

| Make sure the Cookware is made of steel, iron or aluminium with a stainless steel cladding base and has a base

diameter larger than 12 cm

You may have placed the Cookware outside of the cooking zone.
3| The Cookware does not heat up to the required temperature.| The bottom of the Cookware may not be flat.| Always use Cookware with flat bottom. If the problem still exists, then take it to the Authorized Service Centre.
4| The appliance stops working suddenly.| Temperature of the Cookware is too high.| Always Cookware should be cooled before using on the appliance.
5| The appliance does not Switch from one preset

mode to another.

| Mal function of the appliance.| Need to Switch Off the appliance and restart again.
6| The cooking temperature of the preset modes are too high or too low.| May be wrong entry of program in preset mode.| You may Switch to the manual mode for better control of temperature, you may also adjust the cooking temperature in these Modes: Curry/Deep Fry
7| The Fan works but the appliance has not started working.| You may have not pressed cooking mode after you have pressed the On/Off button.| If the cooking button is not pressed within 1 minute after Power On the appliance will Switch Off and the fan will continue to work.

Troubleshoong – Error Codes

utensils on the plate.
E1| Abnormal Supply voltage Voltage too low.| Check the power supply, Power ON after the power supply is back to normal
E2| Abnormal Supply voltage Voltage is too high.| Check the power supply, Power ON after the power supply is back to normal.
E3| Glass Temperature sensor open.| Do not use the appliance & call the Service Centre
E4| Glass Temperature Sensor Short| Do not use the appliance & call the Service Centre
E5| Temperature sensor under IGBT Open| Do not use the appliance & call the Service Centre
E6| Temperature sensor under IGBT Short| Do not use the appliance & call the Service Centre
E7| Fan Failure Air intake / Exhaust vent blocked.| Do not use the appliance & call the Service Centre Clean the vent after the unit cools down then restart
E8| Hardware or internal connection issue| Do not use the appliance & call Service Centre
E9| Plate surface temperature too high Empty Pot/Pan heating leads to too high temperature| Please wait for some minutes until the unit cools down Please check Pot/Pan

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>