TRIPP LITE N520-05M Duplex Multimode 50 125 Fiber Patch Cable Owner’s Manual
- June 14, 2024
- Tripp Lite
Table of Contents
TRIPP LITE N520-05M Duplex Multimode 50 125 Fiber Patch Cable
Product Information
Specifications
- Model Number: N520-05M
- UPC Code: 037332119506
- Technology: Multimode OM2
- Optical Mode: Orange\
- Cable Jacket Color: Gray
- Connector Color: LSZH OFNR
- Cable Jacket Material: PVC
- Cable Jacket Rating: Premium
- Clad Diameter (microns): 125
- Core Diameter (microns): 50
- Number of Fibers: 2
- Cable Length (ft.): 16.4
- Cable Length (m): 5.00
- Cable Length (in.): 196.9
- Minimum Bend Radius: 20 mm (Dynamic); 10 mm (Static)
- Shipping Dimensions (hwd / in.): 9.00 x 7.00 x 0.50
- Shipping Dimensions (hwd / cm): 22.86 x 17.78 x 1.27
- Shipping Weight (lbs.): 0.07
- Shipping Weight (kg): 0.03
Features
- Premium PVC multimode patch cables
- Attenuation loss meets or exceeds the latest industry standards
- Higher bandwidth optimized for gigabit and 10Gbps networks
- Backward compatible with 62.5 micron fiber
- Built-in headroom for future applications
System Requirements
Any fiber optic hardware or NIC card requiring multimode duplex cable with
LC/LC connectors.
Package Includes
5M duplex MMF cable LC/LC 50/125 fiber
Product Usage Instructions
Installation
- Ensure that the fiber optic hardware or NIC card is powered off before connecting the cable.
- Locate the LC connectors on both ends of the cable.
- Gently remove the protective caps from the LC connectors.
- Align the LC connectors with the corresponding ports on the fiber optic hardware or NIC card.
- Insert the LC connectors into the ports, ensuring a secure connection.
- Repeat the steps for the other end of the cable.
Maintenance
To maintain optimal performance, follow these guidelines:
- Avoid excessive bending or twisting of the cable.
- Keep the connectors clean and free from dust or debris.
- Avoid exposing the cable to extreme temperatures or moisture.
- If any damage or deterioration is observed, replace the cable immediately.
Troubleshooting
If you experience any issues with the cable, consider the following
troubleshooting steps:
- Check if the connectors are securely inserted into the ports.
- Inspect the cable for any visible damage or breaks.
- Try using a different fiber optic hardware or NIC card to isolate the issue.
- Contact customer support if the problem persists.
FAQ
-
Q: Can this cable be used with a 62.5 micron fiber optic hardware?
A: Yes, this cable is backward compatible with 62.5 micron fiber. -
Q: What is the warranty period for this product?
A: This product comes with a lifetime limited warranty. -
Q: What is the maximum bandwidth supported by this cable?
A: This cable is optimized for gigabit and 10Gbps networks. -
Q: Can I use this cable for long-distance connections?
A: The cable length is 5M (16 ft.). For longer distances, consider using fiber optic cables with appropriate lengths.
Duplex Multimode 50/125 Fiber Patch Cable (LC/LC), 5M (16 ft.)
MODEL NUMBER: N520-05M
Features
- Constructed with 50/125 micron cable
- Length – 5M
- Use on fiber and fibre channel installations
- LC male to LC male connectors
- Higher bandwidth optimized for gigabit and 10Gbps networks
- Backward compatible with 62.5 micron fiber
- Built-in headroom for future applications
- Number of fibers: 2
- Fiber type: all glass graded index
- Core diameter: two 50+/-3 microns
- CLAD diameter: 125+/-2 microns
- Primary coating diameter: 245+/-15 microns
- Primary coating material: acrylate
- Secondary coating diameter: 900+/-50 microns
- Secondary coating material: PVC
- Attenuation @850NM: 3.5DB/KM maximum, @1300NM: 1.0DB/KM maximum
- Bandwidth @850NM: 220 MHz-KM minimum, @1300NM: 600 MHz-KM minimum
- Numeric aperture: .275 nominal
- Proof test level: 100,000 PSI
- Insertion loss testing performed on every connector (0.2db typical) and provided with cable
- Beveled edge on ends of glass makes insertion of plug a breeze
Highlights
- Premium PVC multimode patch cables
- Attenuation loss meets or exceeds the latest industry standards
- Higher bandwidth optimized for gigabit and 10Gbps networks
- Backward compatible with 62.5 micron fiber
- Built-in headroom for future applications
System Requirements
Any fiber optic hardware or NIC card requiring multimode duplex cable with
LC/LC connectors
Package Includes
5M duplex MMF cable LC/LC 50/125 fiber
Specifications
OVERVIEW
UPC Code| 037332119506
Technology| Multimode
Optical Mode| OM2
PHYSICAL
Cable Jacket Color| Orange
Connector Color| Gray
Cable Jacket Material| LSZH
Cable Jacket Rating| OFNR
Clad Diameter (microns)| 125
Core Diameter (microns)| 50
Number of Fibers| 2
Cable Length (ft.)| 16.4
Cable Length (m)| 5.00
Cable Length (in.)| 196.9
Minimum Bend Radius| 20 mm (Dynamic); 10 mm (Static)
Shipping Dimensions (hwd / in.)| 9.00 x 7.00 x 0.50
Shipping Dimensions (hwd / cm)| 22.86 x 17.78 x 1.27
Shipping Weight (lbs.)| 0.07
Shipping Weight (kg)| 0.03
ENVIRONMENTAL
Operating Temperature Range| -4° to 140°F (-20° to 60°C)
Storage Temperature Range| -4° to 140°F (-20° to 60°C)
Operating Humidity Range| 5% to 85% RH, Non-Condensing
Storage Humidity Range| 35% to 65% RH, Non-Condensing
COMMUNICATIONS
Network Compatibility| 1 Gbps (Gigabit); 10 Gbps; 25 Gbps
Attenuation @ 850NM| 3.0 dB/km
Insertion Loss| 0.20 dB
CONNECTIONS
Side A – Connector 1| LC DUPLEX (MALE)
Side B – Connector 1| LC DUPLEX (MALE)
Endface Polish| PC
---|---
FEATURES & SPECIFICATIONS
Push/Pull Tabs| No
Breakout| No
Trunk| No
STANDARDS & COMPLIANCE
Product Compliance| RoHS; REACH
WARRANTY & SUPPORT
Product Warranty Period (Worldwide)| Lifetime limited warranty
1000 Eaton Boulevard Cleveland, OH 44122 United States
© 2023 Eaton. All Rights Reserved.
Eaton is a registered trademark. All other trademarks are the property of
their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>