Midea MDRB424FGF02AP 321L Stainless Steel Fridge Freezer User Manual
- June 14, 2024
- Midea
Table of Contents
Make yourself at howe
REFRIGERATOR
Bottom Freezer
USER MANUAL MODEL: MDRB424FGFO2AP
SERIES
www.midea.com
Warning:
Before using this product, please read this manual carefully and keep it for
future reference.
The design and specifications are subject to change without prior notice for
product improvement. Consult with your dealer or manufacturer for details.
Safety warnings
1.1 Warning
Warning: Risk of fire flammable materials
Thi$S appiiance s intended to be used in househoid and similar applications
such as staff kitchen areas in shops, offices and other working environments;
farm houses and by clients in hotels, motels and other residential type
environments; bed and breakfast type environments; catering and similar non-
retail applications.
ThisS appiance s not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.) Children
snoudve supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer,ts
service agent or siniarly qualified persons in order to avoid a hazard.
D0 not store expiosive substances such as aerosol cans with a flammable
propeliant n this appliance.
The appiiance has to be unplugged atter use and before carrying out user
maintenance on the appliance.
Warning : Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.
Warning : Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
Warning : Do not damage the refrigerant circuit.
Warning : Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended by the
manufacturer.
Warning : Please abandon the refrigerator according to local regulators
fo ise flammable blowing gas and refrigerant.
Warning : when posi ning the appliance, ensure the supply cord is not
trapped or damaged.
Warning : Do not locate multiple portable socket-outlets or portable
power supplies at the rear of the appliance.
DO not use extension cords or ungrounded ( two prong ) adapters.
Danger Risk of child entrapment. Before you throw away your old
refrigerator o freezer:
– Take off the doors
—Leave the shelves in place so that children may not easily climb inside.
The refrigerator must be disconnected from the source o slectrical supply
before attempting the installation of accessory.
Refrlgerant and cyclopentane foaming material used for the appliance are
flammable.
Therefore, when the appliance is scrapped, it shall be kept away from any fire
source and be recovered by a special recovering company with corresponding
qualification other than be disposed by combustion, 50 s to prevent damage to
the environment or any other harm.
For en standar: This appliance can be used by children aged from 8 years and
above and persons with reduce physical sensory or mental capabilties or lack
of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision. Children aged
from 3 to 8 years are
allowed to load and unload refrigerating appliances.
THhE necessity that, for doors or lds ftted with locks and keys, the keys be
kept out of the reach of children and not in the vicinity of the refrigerating
appliance, in order to prevent children from being locked inside .
TO avoid contamination of food, please respect the following instructions:
– Opening the door for long periods can cause a significant increase of the
temperature in the compartments of the appliance.
~ Clean regularly surfaces that can come in contact with food and accessible
drainage systems.
— Clean water tanks if they have not been used for 48 h; flush the water
system connected to a water supply if water has not been drawn for 5 days.
(note 1)
~ Store raw meat and fish in suitable containers in the refrigerator, so that
it is not in contact with or drip onto other food.
— Two-star frozen-food compartments are suitable for storing pre-frozen food,
storing or making ice-cream and making ice cubes. ( note 2 )
— One-, two- and three-star compartments are not suitable for the freezing of
fresh food. (note 3)
~ For appliances without a 4-star compartment: this refrigerating appliance is
not suitable for freezing foodstuffs. (note 4)
— If the refrigerating appliance is left empty for long periods, switch off,
defrost, clean, dry, and leave the door open to prevent mould developing
within the appliance.
Note 1,2,3,4: Please confirm whether it is applicable according to your
product compartment type.
Fora. freestanding appliance: this refrigerating appliance is not intended to
be used as a built-in appliance.
Any replacement or maintenance of the LED lamps is intended to be made by
the manufacturer, its service agent or similar qualified person.
1.2 Meaning of safety warning symbols
Prohibition symbol| This is a prohibition symbol
Any incompliance with instructions marked with this symbol may resultin damage
to the product or endanger the personal safety of the user.
---|---
Warning symbol| This is a warning symbol.
Itis required to operate in strict observance of instructions marked with this
symbol; or otherwise damage to the product or personal injury may be caused
Note symbol| This is a cautioning symbol Instructions marked with this symbol
require special caution Insufficient caution may result in slight or moderate
injury, or damage to the product.
This manual contains lots of important safety information which shall be
observed by the users
1.3 Electric. ity related warnings
- Do not pull the power cord when pulling the power plug of the refrigerator. Please firmly grasp the plug and pull out it from the socket directly.
- To ensure safe use, do not damage the power cord or use the power cord when it is damaged or worn.
- Please use a dedicated power socket and the power socket shall not be shared with other electrical appliances. The power plug should be firmly contacted with the socket or else fires might be caused.
- Piease ensure that the grounding electrode of the power socket is equipped with a reliable grounding line.
- Please tum off the valve of the leaking gas and then open the doors and windows in case of leakage of gas and other flammable gases. Do not unplug the refrigerator and other electrical appliances considering that spark may cause a fre.
- Do not use electrical appliances on the top of the appliance, unless they are of the type recommended by the manufacturer.
1.4 Warnings for using
-
Do ot arbitrarily disassemble or reconstruct the refrigerator, nor damage the refrigerant circuit; maintenance of the appliance must be conducted by a specialist
-
Damaged power cord must be replaced by the manufacturer, its maintenance department or related professionals in order to avoid danger.
-
The gaps between refrigerator doors and between doors and refrigerator body are small, be noted not to put your hand in these areas to prevent from squeezing the finger. Please be gentle when close the refrigerator door to avoid falling articles.
Do not pick foods or containers with wet hands in the freezing chamber when the refrigerator is running, especially metal containers in order to avoid frostbite. -
Do not allow any child to get into or climb the refrigerator; otherwise suffocation or falling injury of the child may be caused.
-
Do not place heavy objects on the top of the refrigerator considering that objects may fall when close or open the door, and accidental injuries might be caused.
-
Please pull out the plug in case of power failure or cleaning. Do not cconnect the refrigerator to power supply within five minutes to prevent damages to the compressor due to successive starts.
1.5 Warnings for placement
- Do not put flammable, explosive, volatile and highly corrosive items in the refrigerator to prevent damages to the product or fire accidents.
- Do not place flammable items near the refrigerator to avoid fires.
- The refrigerator is intended for household use, such as storage of foods; it shall not be used for other purposes, such as storage of blood, drugs or biological products, etc.
- DO not store beer, beverage or other fluid contained in bottles or enclosed containers in the freezing chamber of the refrigerator; or otherwise the bottles or enclosed containers may crack due to freezing to cause damages.
1.6 Warnings for energy
Warning for energy
- Refrigerating appliances might not operate consistently (possibility of defrosting of contents or temperature becoming too warm in the frozen food compartment) when sited for an extended period of time below the cold end of the range of temperatures for which the refrigerating appliance is designed.
- The fact that effervescent drinks should not be stored in food fraezer compartments or Gabinets or in low-temperature compartments or cabinets, and that some products such as water ices should not be consumed too cold;
- The need to not exceed the storage time(s) recommended by the food manufacturers for any kind of food and particularly for commercially quick-frozen food in food-freezer and frozen-food storage compartments or cabinets;
- The precautions necessary to prevent an undue rise in the temperature of the frozen food while defrosting the refrigerating appliance, such as wrapping the frozen food in several layers of newspaper.
- The fact that a rise in temperature of the frozen food during manual defrosting, maintenance or cleaning could shorten the storage life.
1.7 Warnings for disposal
Refrigerant_and cyclopentane foaming material used for the refrigerator are
flammable. Therefore, when the refrigerator is scrapped, it shall be kept away
from any fire source and be recovered by a special recovering company with
corresponding qualification other than be disposed by combustion, so as to
prevent damage to the environment or any other harm
When the refrigerator is scrapped, disassemble the doors, and remove gasket of
door and shelves; put the doors and shelves in a proper place, so as to
prevent trapping of any child.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe
recycling.
Proper use of refrigerators
2.1 Placement
- Before use, remove all packing materials, including bottom cushions, foam pads and tapes inside of the refrigerator; tear off the protective film on the doors and the refrigerator body.
- Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent rust or reduction of insulating effect.
- Do not spray or wash the refrigerator; do not put the refrigerator in moist places easy to be splashed with water so as not to affect the electrical insulation properties of the refrigerator.
- The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat, and sturdy (rotate left or right to adjust the wheel for levelling if unstable).
- The top space of the refrigerator shall be greater than 30cm, and The refrigerator should be placed against a wall with a free distance more than 10cm to facilitate heat dissipation.
Precautions before installation:
Before installation or adjusting of accessories, it shall be ensured that the
refrigerator is disconnected from power.
Precautions shall be taken to prevent fall of the handle from causing any
personal injury.
2.2 Levelling feet
Schematic diagram of the levelling feet
(The picture above is only for reference. The actual configuration will depend
on the physical product or statement by the distributor)
Adjusting procedures
a. Turn the feet clockwise to raise the refrigerator;
b. Turn the feet counterclockwise to lower the refrigerator;
c.Adjustthe right and left feet based on the procedures above to a horizontal
level
2.3 Door Right-Left Change (Optional)
List of tools to be provided by the user
| Cross screwdriver| | Putty knife thin-blade screwdriver
| 5/16″ socket and ratchet| | Masking tape
- Power off the refrigerator, and remove all objects from the door trays.
- Dismantle upper hinge cover, disconnect the signal wires upper hinge and hole cap of the other side, remove the refrigerating door
- Dismantle the middle hinge, the screws ,the screws hole caps and remove the freezer door.
- Dismantle the bottom hinge, hole caps and screws, Install the bottom hinge shaft on other side of the bottom hinge, then install the hinge on the other side.
- Dismantle the screws, sleeve pipe and stopper on the lower end cover of the two door bodies, and install them successively on the other side of the door bodies (the stopper needs to be replaced from the additional bag). Then remove the upper end cover of the cooler door and switch the wire harness with a sleeve pipe to the other side of the door body. Finally install the sleeve pipe of the upper hinge on the cooler door in the hole on the other side of upper end cover of the cooler door. (The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor )
- Place the door body for the refrigerator compartment on the middle hinge, then install the upper hinge to the other side of the cabinet, finally connect the terminals1, 2 for the signal wires at the side of the upper hinge and terminals 3, 4 on the other side and cover the hinge cover and hole cover.
- Place the door body for the refrigerator compartment on the middle hinge, then install the upper hinge to the other side of the cabinet, finally connect the terminals1, 2 for the signal wires at the side of the upper hinge and terminals 3, 4 on the other side and cover the hinge cover and hole cover.
2.4 Changing the Light
- Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer,its service agent or similar qualified person
Light source in this product is replaceable only by qualified engineers.
| 1. Please take out the plug before removal.| | 2. Remove the lampshade
witha screwdriver.
---|---|---|---
| 3. Take down the lamp panel.| | 4. Remove the connection terminal.
2.5 Starting to use
- Before initial start, keep the refrigerator still for half an hour before connecting it to power supply.
- Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for above 4 hours in summer when the ambient temperature is high.
- Spare enough space for convenient opening of the doors and drawers or statement by the distributor.
2.6 Energy saving tips
- The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct suniight.
- Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil
- Be sure to wrap foods properly, and wipe containers dry before placing them in the o appliance. This cuts down on frost build-up inside the appliance.
- Appliance storage bin should not be lined with aluminum foil, wax paper, o paper o toweling.
- Liners interfere with cold air circulation, making the appliance less efficient. Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible.
Structure and functions
3.1 Key components
The picture above s only for reference. The actual configuration will depend on the physical product or statement by the distributor )
Refrigerating chamber
-
The Refrigerating Chamber is sitable for storage of a variety of fruis, vegetables, beverages and other food consumed in the short term,suggested storage time 3days to 5days.
-
Cooking foods shall not be put i the refrigerating chamber until cooled to room temperature.
-
Foods are recommended to be sealed up before putting into the refrigerator.
-
The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy use.
Freezing chamber -
The low temperature freezing chamber may keep food fresh for a long time and itis mainly used to store frozen foods and making ice.
-
The freezing chamber is suitable for storage of meat, fish, rice balls and other foods not to be consumed in short term.
-
Chunks of meat are preferably to be divided into small pieces for quick freezing and easy access.
Please be noted food shall be consumed within the shelf time.
Drawers, food box and shelves are the most energy-saving when placed in the factory. Please refer to the above pictures.
Note: Storage of too much food during operation after the initial connection to power may adversely affect the freezing effect of the refrigerator.
3.2 Functions
Tne picture above s only for reference. The actual configuration will depend on the physical product or statement by the distributor)
-
Key
A.Temperature setting button -
Display screen
1 Dtemperature setting1
2 temperature setting3
3 temperature settingd
4 Stemperature setting5
5 temperature settingé -
Display
When power-on the refrigerator, the display screen (including the key light) will shine in full for 3s, then the refrigerator runs according to temperature setting 3.
Display of normal running On the occurrence of a failure, the corresponding LED light will give a combined display of failure code (in recycling display):
Where there is no failure, the LED light will display the existing temperature setting. -
Gear setting
The temperature setting will be changed once every time when you press the key SET. Then, the refrigerator will run under the new setting value after 15s -
Adjustment of manual air damper knob
Turn the air damper slider up, the actual temperature inside the freezer room will drop,
Turn the air damper slider down, the actual temperature inside the freezer room will rise. Setting Setting2 Settingd Setting4 PSettings PSettings Setting1 ……………… -
Error code
The following warnings appearing on the display indicate corresponding faults of the refigerator. Though the refrigerator may still have cooling and freezing function with the following fauits, the user shall contact a maintenance specialist for maintenance, so as to ensure normal use of the refrigerator.
Fault Code | Fault Description |
---|---|
The LED® andLED @ it | Refrigerator temperature ‘sensor circuit |
The LED® and LED @it | Freezer defrost sensor |
The LED® and LED @ Jit | Ambient temperature sensor |
Note: The quick-freezing function is designed to maintain the nutritional value of the food in the freezer. It can freeze the food in the shortest time. If a large amount of food is frozen at one time, it is recommended that the user tum on the quick-freezing function and put the food in. At this time, the freezing speed of the freezer compartment is increased, which can quickly freeze the food, effectively lock the nutrition of the food, and faciltate storage.
Maintenance and care of the appliance
4.1 Overall cleaning
- Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving
- Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth dampened with soapy water or diluted detergent
- The interior of the refrigerator should be cleaned regularly to avoid odor.
- Please tun off the power before cleaning interior, remove all foods, drinks shelves, drawers, etc.
- Use a soft cloth or sponge to cean the inside of the refrigerator, with two tablespoons of baking soda and a quart of warm water. Then rinse with water and wipe clean. After cleaning, open the door and let it dry naturally before turning on the power.
- For areas that are difficult to clean in the reffigerator (such as narrow sandwiches, gaps or comers), it is recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combined with some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterials accumulation in these areas
- Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the interior of the refrigerator or contaminated food.
- Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water o diluted detergent. Dry with a soft cloth or dry naturally.
- Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water, detergent, etc., and then wipe dry.
- Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpastes), organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items, which may damage the fridge surface and interior. Boiling water and organic solvents such as benzene may deform or damage plastic pars.
- Do ot rinse directly with water or other liquids during cleaning to avoid short circuits o affect electrical insulation after immersion. Please unplug the refrigerator for defrost and cleaning.
4.2 Defrosting
- The refrigerator is made based on the air-cooling principle and thus has automatic defrosting function. Frost formed due to change of season or temperature may also be manually removed by disconnection of the appliance from power supply or by wiping with a dry towel.
4.3 Out of operation
- Power failure: In case of power failure, even if it is in summer, foods inside the appliance can be kept for several hours; during the power failure, the times of door opening shall be reduced, and no more fresh food shall be put into the appliance.
- Long-time nonuse: The appliance shall be unplugged and then cleaned; then the doors are left open to prevent odor.
- Moving: Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable holder, freezing chamber drawers and etc. with tape, and tighten the levelling feet; close the doors and seal them with tape. During moving, the appliance shall not be laid upside down or horizontally, or be vibrated; the inclination during movement shall be no more than 45°.
The appliance shal run continuously once it i started. Generally, the operation of the applian shall not be interrupted; otherwise the service life may be impaired
Troubleshooing
5.1 You may try to solve the following simple problems by yourself.
If them cannot be solved, please contact the after-sales department.
Failed operation| Check whether the appliance is connected to power or whether
the plug is in well contact
Check whether the voltage is too low
Check whether there is a power failure or partial circuits have tripped
---|---
Odor| Odorous foods shall be tightly wrapped Check whether there is any rotten
food Clean the inside of the refrigerator
Long-time operation of the compressor| Long operation of the refrigerator is
normal in summer when the ambient temperature is high
It is not suggestible having too much food in the appliance at the same time
Food shall get cool before being put into the appliance
The doors are opened too frequently
Light fails to get lit| Check whether the refrigerator is connected to power
supply and whether the illuminating light is damaged
Have the light replaced by a specialist
Doors cannot be properly dosed| The door is stuck by food packages The
refrigerator is tilted
Loud noise| Check whether the floor is level and whether the refrigerator is
placed stably Check whether accessories are placed at proper locations
Door seal fails to be tight| Remove foreign matters on the door seal Heat the
door seal and then cool it for restoration (or blow it with an electrical
drier or use a hot towel for heating)
Water pan overflows| There is too much food in the chamber or food stored
contains too much water,resulting in heavy defrosting.
The doors are not closed properly, resulting in frosting due to entry of air
and increased water due to defrosting.
Hot housing| Heat dissipation of the built-in condenser via the housing, which
is normal When housing becomes hot due to high ambient temperature,
storage of too much food, provide sound ventilation to facilitate heat
dissipation.
Surface condensation| Condensation on the exterior surface and door seals of
the refrigerator is normal when the ambient humidity is too high. Just wipe
the condensate with a clean towel.
Abnormal noise| Buzz: The compressor may produce buzzes during operation, and
the buzzes are loud particularly upon start or stop. This is normal. Creak:
Refrigerant flowing inside of the appliance may produce creak, which is
normal.
Documents / Resources
|
Midea MDRB424FGF02AP 321L Stainless Steel Fridge
Freezer
[pdf] User Manual
MDRB424FGF02AP, MDRB424FGF02AP 321L Stainless Steel Fridge Freezer, 321L
Stainless Steel Fridge Freezer, Stainless Steel Fridge Freezer, Steel Fridge
Freezer, Fridge Freezer, Freezer
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>