GYS 057340 Quick Spot Air Gun User Manual
- June 4, 2024
- GYS
Table of Contents
GYS 057340 Quick Spot Air Gun
DESCRIPTION
- Power cable connector
- Compressed air connector
- Handle
- Trigger
- Bearing pad
- Pulling electrode
- Stroke adjustment thumbwheel
CHARACTERISTICS
- Cables set length 2,5 m
- Air input pressure 6 bar < P < 8 bar
- Dimensions (except cables) 165 L x 80 l x 200 H mm
- Weight (excepting cables) 920 g
CONNECTIONS
Electrical connections
Connect the power cable connector on the generator.
Compressed air connection
Connect the air connector to the compressed air network. The air network must deliver a stable pressure between 6 and 8 bars.
STROKE ADJUSTMENT
Adjust the zero level with the following instructions
Without any pressure on the trigger, the pulling electrode extends a few centimeters beyond the bearing pad.
Turn the stroke adjustment thumbwheel (1) such that when the trigger is pressed, the tip of the pulling electrode is aligned with the bearing pad surface.
INSTRUCTIONS OF USE
The product must be used with a generator equipped with automatic detection of car body. Connect the earth plate of the generator to the car body. The area to pull must be grinded in order to remove any nonconductive coating. The product has been designed to pull on skin parts of the vehicle (thickness 0,6 – 0,8mm, 1mm maximum).
Apply the pulling electrode against the area to pull on the car body; the welding is triggered automatically.
Press slightly on the trigger to start pulling. A progressive pulling is possible with a progressive action on the trigger.
Press strongly on the trigger after pulling, the electrode automatically turns by a quarter to detach from the metal.
CONSUMABLES
To change the electrode, remove the pad by rotating it.
Pulling Electrodes (x5)
SYMBOLS
- The device complies with European Directive. The certificate of compliance is available on our website.
- This hardware is subject to the waste collection according to the European directives 2012/19/EU. Do not throw out in a domestic bin!
- This product should be recycled appropriately
- Equipment in compliance with British requirements. The British Declaration of Conformity is available on our website (see home page).
GYS SAS
1, rue de la croix des landes
53941 Saint-Berthevin
France
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>