Sportneer GW-083 Inline Roller Skates User Manual

Inline Skate
Model: GW-083
User Manual
Protector Set Model: GW-238

GW-083 Inline Roller Skates

Learn more about the EU Declaration of Conformity, Please click below link to download. http://files.sportneer.com/gw-238-eu-doc.pdf
Learn more about the UK Declaration of Conformity, Please click below link to download. http://files.sportneer.com/gw-238-uk-doc.pdf

Specifications

Non-Toxic

Protector Set:

fabric + EVA + ribbon + Palm protector
Color:| Pink/Blue/Purple

Before Use

The adjustable rollers are Class-B intended for users weighing over 20kg but less than 60kg.

Protector Size:| XS  Level 1, Rang B: Users with body mass more than 25kg to 50kg,
---|---
and Rang C :| Users with body mass above 50kg.
Protector Size:| M  Level 1, Rang B: Users with body mass more than 25kg to 50kg,
and Rang C :| Users with body mass above 50kg.
Protector Size:| L Level 1, Rang B: Users with body mass more than 25kg to 50kg,
and Rang C:| Users with body mass above 50kg

How to wear Sportneer’s Children’s Skates.
Step 1:
With the skate flat on the ground, place your foot inside.
Step 2:
wear socks before the shoes, sitting on a stool, will a roller skate flat on the ground, and then a foot from the mouth of the skate to wear, feel comfortable.
Step 3:
Tie the lace of each skate firmly.
Step 4:
Lock each skate buckle.

How to wear Sportneer’s protective pads.

1. Elbow Pads
   Remove the velcro and pay attention to the difference between the top and bottom of your elbow pads. The upper part of the elbow pad is broader than the lower part to allow room for the biceps. Insert your arm through the anti-slip sleeve and secure the velcro snugly.

2. Knee Pads
   Remove the velcro and pay attention to the difference between the top and bottom of your elbow pads. The upper part of the knee pad is generally broader than the lower part to allow room for the upper leg.
   Insert your leg through the anti-slip sleeve and secure the velcro snugly.

3. Palm protector
   Layout your palm protector so that each one is in front of the appropriate arm. When putting on the palm protector, ensure the curved portion of the guard is on the palm side of your hand. Insert your thumb through the hole and secure the velcro,  nsuring a snug fit
   After wearing it, ensure that the protective strap is securely fastened so that the protective device does not slide or rotate during use. They should not be removed from the body parts they protect.
   The straps should be comfortable and not restrict blood flow.

Ensure that the protective gear corresponds correctly to your size:

1. The protective gear is fully protected.
2. Protectors do not slide or rotate.
3. After wearing it, you can move completely freely

Adjusting the size

Your skates are adjustable.

1. To adjust the skates, unbuckle and unstrap the top of the skate.
2. Press and hold the button at the base of the skate and pull/push the toe to the desired position before releasing the button.

Adjusting the size of the insole

Confirm your kid’s feet size to know if you need to cut the insole into a more appropriate size/shape. For example, if your kid’s feet is size 34, ensure to cut the insole along the line of “34”

Adjusting protective gear

After wearing the protective gear, adjust its tightness by the Velcro straps and ensure that the protective gear is fully secured.

Warning

This packaging contains small parts, which can cause choking or suffocation if swallowed.
Please keep the packaging away from children and small animals. Be careful when unpacking and assembling the product.
The materials used to make Sportneer’s protective pads and skates are safe, non-toxic, and non-harmful materials for children. It is recommended users wear a complete set of protective pads to minimize the risk of injury.
In addition to Sportneer’s protective gear, we encourage users to wear light- reflective clothes and long sleeves on both the upper and lower body to prevent any scrapes, bruises, or minor cuts while riding. Inline skating can be dangerous and may lead to injury or even death. Sportneer’s protective equipment does not guarantee full protection from injuries but will help prevent most injuries.
Attention: Do not make any alterations or modifications to the design of the boot or body of the inline skates, as this may reduce the product’s safety.

1. No protector can offer complete protection against injuries.
2. Do not transform the protector at will.
3. Please check if the protector is in good condition before use; f it is damaged, please stop using it
4. Do not leave the protector exposed to extreme heat, rain, or snow for long periods, and store itin a dry, well-ventilated area between uses.
5. Changes in environmental conditions, such as temperature, would signicantly reduce the performance of the protector.
6. Contamination, alteration to the protector, or misuse would dangerously reduce the performance of the protector.

Safety Recommendations

Using the inline skates requires mastering certain skills by children to avoid falls, collisions, and injuries. As the child learns these skills, it is recommended they be under the close supervision of an adult, and it is important the child never be left alone.
Always mind your environment and ride in a safe place where your child can adjust and improve their skills. Avoid riding on busy streets, main roads, hilly or wet areas, and around stairs, and observe traffic rules when riding.

Cleaning and maintenance

Check the self-locking nuts and other self-locking devices regularly because they can lose their effectiveness.

• Regularly check the self-locking devices on the skates to ensure their effectiveness.
• Remove rocks or sharp debris that may have become lodged in the skate after each use.
• Do not leave the skates exposed to extreme heat, rain, or snow for long periods, and store the skates in a dry, well-ventilated area between uses.
• Clean the skates with a wet cloth and avoid using cleaning materials that could be corrosive.
• Regular maintenance of your skates will ensure the skates’ longevity and keep your child safe.
• The bearings that are fixed to wheels require little to no maintenance. To maintain the wheel bearings, clean with a dry cloth and oil the bearings every two to three months to keep them lubricated; this will ensure the wheels spin smoothly while riding
• If the inner skate sleeve has gotten damp or wet during riding, remove the sleeve and dry it. To clean the skate sleeve, it’s suggested to wash the sleeve by hand in cool water to prevent bacteria growth.
• If you experience any issues with the wheels or wheel bearings, please get in touch with your sales agent for warranty information.
• Clean the protector with a wet cloth and avoid using cleaning materials that could be corrosive.
• Protective equipment should NOT be stored in direct sunlight and damp environments.

Note

Read the instruction manual

1.  Wash at or below 30°C
2. Do not bleach
3. Do not tumble dry
4. Do not iron
5. DO NOT DRY CLEAN
6. Flat Dry

US Importer: Thousandshores Inc., 37707 Cherry St, Newark, CA 94560, USA EU Importer:
Thousandshores Deutschland GmbH, BredowstraRe 17, Hamburg 22113, DE Manufacturer: Shenzhen Thousandshores Technology Co., Ltd
Room 1101, Building B, Lotus Plaza, No. 3186 Nanshan Avenue, Majialong Community, Nantou Street, Nanshan District, Shenzhen, China
UK Authorised Representative:
APEX CE SPECIALISTS LIMITED, 89 Princess Street, Manchester, M14HT, UK P0-230810371
The product life lasts for 5 years from manufacturing to obsolescence before opening the sealed packing.
This helmet i in conformity with the PPE regulation (EU) 2016/425
Notified Body: INTERTEK ITALIA Spa, Via Miglioli, 2/A — Cernusco sul Naviglio (M) ITALY. No.2575

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>