Brook XB 2 Converter Wireless Controller Adapter User Guide

Brook XB 2 Converter Wireless Controller Adapter

Product Information

• The XB2 Converter is a device that allows you to connect various controllers to your XB 360, XB Original, or PC via a USB port. It supports a wide range of controllers, including XB 360 controllers, XB Original controllers, PC controllers, PS4 controllers, PS3 controllers,
• Switch Pro controllers, and more.
  The converter features LED buttons for status indication and supports both wired and wireless connections.

CONVERTER

Lighting|

Status

---|---
__**Blue LED
Permanently on| The connector and the device are currently connected.
Blue LED
Slow blinking (Once every two seconds)| Wired device is not connected Wireless device is searching for connection…
**Blue LED
Fast blinking| Wireless connection mode is ON. Searching for pairing device…
__**Red LED
Blinking| Turbo-Remap button is being pressed
__**Red LED
Permanently on| Entering Turbo-Remap Set- tings

Connecting to the Device

1. step.1
   Insert Wingman XB 2 into the XB 360 / XB Original console USB port. Slow blinking of the Blue LED indicates that the connection to the console is successful.

2. step. 2
   Wired Connection
   Connect the XB 360 / XB 1/ PS3 / PS4 / Switch Pro wired controller or game pad to Wingman XB 2 through the USB port.
   Using a XB 360 wireless controller
   Simply connect the wireless XB 360 wireless receiver to the Wingman XB 2 through the USB port.
   Using XB 1 wireless controller / XB 1 Elite Series 2 / Switch Pro controller: Connect the XB 1 wireless controller (Bluetooth model) or the XB 1 Elite Series 2 to the Wingman XB 2 and the controller will be ready for use. When connecting, hold the LED buttons at the two
   sides of the Wingman XB 2 for 1 second to enter wireless connection mode. Then press the Pair button on the wireless controller to begin pairing. Fast blinking of Blue LED indicates that pairing is in progress.
   
   Using PS3 / PS4 wireless controller
   After completing the connection according to the instructions of the Wired Connection, remove the USB cable, and then wake up the PS3 / PS4 / Switch Pro wireless controller.

3. step. 3
   Check whether the two Blue LEDs at the sides of the Wingman XB 2 are permanently on. This indicates that the connection is completed.

Connection Pairing Supplementary Instructions

1. step.1
   Holding the LED buttons on the two sides of the Wingman XB 2 for 1 second will activate wireless connection pairing mode. The Wingman XB 2 will engage in pairing with surrounding Bluetooth devices.

2. The pairing mode will end if
   

   • The connection pairing with the wireless controller is successful.
   • The connection pairing is unsuccessful after 1 minute.
   • The LED buttons ar e held for 1 second.
     

3. step. 2
   Wireless connection records between an XB 1 wireless controller (with Bluetooth function)/XB 1 Series 2 and the Wingman XB 2 will be erased if a wired connection is used. Wireless connection re-pairing will be required if wireless connection is used.
   step. 3
   If XB1 Elite Series 2 controller is used, please turn off controller profile settings to prevent interference with Wingman XB 2’s Turbo or Remap settings. As XB 1 Elite Series 1 controller is incapable of turning off profile settings, using XB 1 Elite Series 1 controller might result in Remap function overlapping.

Corresponding Buttons

XB1 Elite Series2| X360| PS4/PS5| PS3| Switch| PC
---|---|---|---|---|---
D-Pad (U/D/L/R)
Lx / Ly
Rx / Ry
A| A| ╳| ╳| B| A
B| B| ○| ○| A| B
X| X| □| □| Y| X
Y| Y| △| △| X| Y
LB| LB| L1| L1| L| LB
RB| RB| R1| R1| R| RB
LT| LT| L2| L2| ZL| LT
RT| RT| R2| R2| ZR| RT
LSB| LSB| L3| L3| L3| LSB
RSB| RSB| R3| R3| R3| RSB
MENU| START| OPTIONS| START| +| START
VIEW| BACK| SHARE /Create| SELECT| –| BACK
XB Guide Key| XB Guide Key| PS Key| PS Key|  Home| XB Guide Key

Turbo Function Settings

• The following instructions are based on the XB 1 controller. For those using other controllers, please refer to the Corresponding Buttons List.

Turbo Function Settings

• Buttons that can be set as Turbo function buttons include:A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)

1. Step 1. Enter setting mode
   Press VIEW + XB Guide, the RED LED of the Wingman XB will be permanently on.
   

2. Step 2.
   Choosing a FK button: (e.g. Setting A as turbo function) Hold VIEW, then press A

3. Step 3. Completing Setting Mode
   Release all buttons, then press MENU to save settings.

4. Step 4. Exit setting mode
   Press XB Guide, the BLUE LED of the Wingman XB will be permanently on.

Cancelling Turbo Function

1. Step 1. Enter setting mode
   Press VIEW + XB Guide, the RED LED of the Wingman XB 2 will be permanently on.

2. Step 2.
   Erasing all Turbo function buttons Press VIEW + MENU

3. Step 3. Exit setting mode
   Press XB Guide, the BLUE LED of the Wingman XB 2 will be permanently on.

Turbo Frequency Setting

The following instructions are based on the XB 1 controller. For those using other controllers, please refer to the Corresponding Buttons List.

1. Step 1. Enter the setup mode
   Press VIEW + XB Guide, the RED LED of the Wingman XB 2 will be permanently on.

2. Step 2. Turbo Frequency Setting
   The Up button increases frequency while the Down button decreases it.
   To increase frequency: press both VIEW and the Up buttons, and the indicator will flash faster.
   To decrease frequency: press both VIEW and Down buttons, then the indicator will flash slower.

3. Step 3. Save
   Press MENU to save your settings.

4. Step 4. Exit
   Press the XB Guide button to leave Turbo setup mode. The RED LED indicator will then turned off.

Button Remap Settings

The following instructions are based on the XB 1 controller. For those using other controllers, please refer to the Corresponding Buttons List.

Button Remap Settings

• Buttons that can be Remap include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)

1. Step 1. Enter setting mode
   Press MENU + XB Guide, the RED LED of the Wingman XB 2 will be permanently on.

2. Step 2.
   Choosing a FK button: (e.g. Setting X as A+B) Press X

3. Step 3. Choosing button to be set
   Hold VIEW, then press A + B.

4. Step 4. Completing setting mode
   Release all buttons, then press MENU to save settings.

5. Step 5. Exit setting mode
   Press XB Guide, the BLUE LED of the Wingman XB 2 will be permanently on.
   

Cancelling Button Remap Settings

1. Step 1. Enter setting mode
   Press MENU + XB Guide, the RED LED of the Wingman XB 2 will be permanently on.
   

2. Step 2.
   Erasing all settings for Button Remap Settings. Press VIEW + MENU.

3. Step 3. Exit setting mode
   Press XB Guide, the BLUE LED of the Wingman XB 2 will be permanently on.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE :

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Ambient Operating Temperature ………………….0℃ to +50℃

IC Statement
This device complies with Canada Industry licence-exempt RSS standard(s). Opera-tion is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference. Including interference that may cause undesired operation of the device.

CAN ICES-3 (B)

For the latest user guide and more information, visit our website: www.brookaccessory.com

References

• Brook Gaming

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>