iGET GN6000 Black view Orange Mobile User Guide

: June 14, 2024
: iGET

Table of Contents

iGET GN6000 Black view Orange Mobile
Product Information
Product Usage Instructions
Specifications
Overview
Charging the battery
Operation of radio equipment
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

iGET GN6000 Black view Orange Mobile

Product Information

NFC : Near Field Communication
Speaker : Reproducer
Type-C USB : USB-C connector
Screen : Display
5G WiFi : Supports 5G WiFi network
RoHS : Compliant with RoHS standards

Product Usage Instructions

Einschalten / Ausschalten des Handys / Standby-Regime (Turning On/Off the Phone/Standby Mode)
To turn on the phone, press and hold the power button until the device powers on. To turn off the phone, press and hold the power button, then select “Power off” from the options. When not in use, you can put the phone in standby mode by pressing the power button briefly.

Microphone Location
Warning: The microphone is located on the bottom of the phone. When the microphone is overlapped, for example, by your hand, the other side will not hear or will hear very poorly.

Specifications

Maximal EIRP : Max. 2 W

iGET-GN6000-Black-view-Orange-Mobile-fig-4

Overview

SIM/T-flash card slot

Function key
Microphone
NFC
Speaker
VolumePower Key
Fingerprint Scanner/Power Key
Receiver:
Led spotlight
Camera
Front Camera Screen Type-C USB
Screen

User

Thank you for purchasing a product from iGET. Individual parameters, descriptions by figures, and design in the manual may differ depending on the version and updates. Printing errors reserved. Update your device as soon as a new version of the software is available. The warranty sheet and the user manual are included in the phone package.

Update your device as soon as a new version of the software is available.

The buyer is obliged to provide a serial number on the warranty card as well as in the delivery note and the proof of purchase. In this context, the buyer acknowledges that unless the serial number of goods is not marked on the proof of purchase, delivery note, and warranty card and therefore it cannot be possible to compare this serial number marked on the goods and their protective packaging with the serial number stated in the warranty card, delivery note and the proof of purchase and thus to verify that the goods run from the seller, the service center is competent to claim such goods automatically and reject it immediately. The buyer must instruct all persons to whom the goods would be subsequently sold. Product complaints are with your dealer if you are not on the web www.iget.eu indicates otherwise.

Safety use

GN6000 has an increased resistance. However, it is not mechanically undestroyable. The display is made of tempered glass, which ensures higher resistance against scratches. When dropped on a hard surface or sharp object, it may crack. The display cracked due to mechanical damage or improper misuse of the device is not covered by warranty.

The GN6000 has the IP68 and IP69K certification under ISO 20653:2013 standard.
(According to the manufacturer, up to 1.5 m to a depth of 30 minutes. The IP68 resistance does not apply to salt water or any other chemical additives, such as cleaning substances!)

The phone also has IP69K certification and military standard certificate MIL-STD-810H. The IP68 protection does not guarantee 100% resistance to water in all conditions.
We also recommend not to charge the phone and dry the phone´s connector after contact with water or other liquid with an adequately warm airflow (up to 40°C). Outside the charging time, always keep the input for the charging connector and headphones properly closed with the cover. The warranty is not applied to intentional damage to the phone.

Warning

the microphone is located on the bottom of the phone, when overlapped (eg with your hand), the other side will not hear or will hear very poorly. Installing the SIM NANO and microSD card Switch your phone off before installing the card.
- Carefully pull the SIM or microSD card holder from the side of the phone, insert the cards into the drawer, so they fit into the place and then put the drawer back into the phone.
- You can use the 2x NANO SIM, according to the diagram.

Charging the battery

Before putting your phone into service you must recharge its battery for 100%.

Connect the adapter to the charger. USB-C can be rotated from both sides. Yet when attaching the connector, do not use violence.
Connect the charger to the wall outlet.
If the battery is fully charged, disconnect the phone from the charger.

Switching the phone on/off / sleep
mode Make sure that the phone has a SIM card and the battery is fully charged.
Press and hold the ON/OFF button to switch on the phone. Switch off the phone by pressing and holding the ON/OFF button and selecting OFF. Press shortly ON/OFF button to switch the phone over to sleep mode.

Safety Precautions
Do not use your phone while driving Do not use your phone at the petrol stations. Hold the phone at least 15 mm from your ear and body. The phone produces a bright or flashing light. The small parts of the phone can cause suffocation. Do not expose your phone to open fire. The phone can produce a loud sound. The phone is not resistant to fillings. Avoid exposure to magnetic fields. Keep the phone away from medical devices. On request, turn off your phone in hospitals and other medical facilities. Keep the phone dry.

On request, turn off the phone at airports and on planes. Do not dismantle the phone. Turn off the phone in the vicinity of explosive materials and chemicals. Use the phone only with certified equipment. Do not rely only upon your phone during emergency situations. The phone contains a label that detects moisture. In case of moisture inside the phone, this label becomes red. The manufacturer has the right to reject a warranty with such a damaged phone.

Damages requiring professional repair
If such cases may occur, please, contact the authorized service or your distributor: Moisture got into the phone. The phone is mechanically damaged.

The phone is extremely overheated. to a designated collection point, where it will be accepted free of charge. The correct disposal of this product will help to save valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of waste. For more details, please, contact your local authorities or the nearest collection point.

The improper disposal of this waste can be penalized in accordance with national regulations. Information for users to dispose of electrical and electronic devices (corporate and1) For household use: The given symbol (crossed-out wheeled bin) on the product or accompanying documents means that used electrical and electronic products should not disposed of with household waste. To ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted free of charge.

The correct disposal of this product will help to save valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of waste. For more details, please, contact your local authorities or the nearest collection point.

The improper disposal of this waste can be penalized in accordance with national regulations. Information for users to dispose of electrical and electronic devices (corporate and business use):

For proper disposal of electrical and electronic devices, ask for details from your dealer or distributor. Information for users to dispose of electrical and electronic devices in other countries outside the EU: The above-mentioned symbol (crossed-out wheeled bin) is valid only in the countries of the EU. For proper disposal of electrical and electronic devices, ask for details from your authorities or dealer. All is expressed by the symbol of crossed-out wheeled bins on products, packaging, or printed materials.
Set up the claim for warranty repair of the device at your dealer. If you have technical questions or problems, contact your dealer. Follow the rules for working with electrical equipment. The user may not dismantle the device or replace any part of this. There is a warranty seal inside the phone to verify that the phone does not carry signs of improper intrusion. Opening or removing the covers poses the risk of electric shock. In case of incorrect reassembly and subsequent connection, you are also exposed to electric shock.

Declaration of Conformity

Company INTELEK.CZ s.r.o. hereby declares that all GN6000 devices are in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available on this website www.iget.eu. The warranty period of the product is 24 months unless stated otherwise.

This device can be used in the following countries

Restrictions on WiFi use

Italy The conditions for using the WiFi network are described in the so-called Electronic Communications Code
Norway – The 2.4 GHz limitation applies only to the area 20 km from the colony of 5G WiFi When using a radio device in the 5150 5350 MHz frequency range, use is limited to indoor spaces only.
RoHS: The components used in the device meet the requirements on the restriction of hazardous substances in electrical and electronic devices in accordance with Directive 2011/65/EU. The RoHS declaration can be downloaded from www.iget.eu

Operation of radio equipment

CZ : This radio equipment can be operated in the Czech Republic under the General Authorizations VO-R / 1 / 05.2017-2 and VO-R / 12 / 09.2010-12.
SK: This radio equipment can be operated under General Authorizations VPR – 07/2014, VPR – 02/2017 and VPR – 35/2012.

Maximum EIRP

Max. 2 W

Frequency range

GSM : 900/850/1800/1900 MHz
WCDMA : 1800/2100 MHz
LTE : 2100/1800/2600/900/2300/800 MHz
2.4G WiFi (20 MHz): 2412 – 2472 MHz
2.4G WiFi (40 MHz): 2422 – 2462 MHz
5G WiFi : (H20) 5180 – 5240 MHz
5G WiFi : (H40) 5190 – 5230 MHz
5G WiFi : (H80) 5210 MHz

Exclusive importer of its products to the EU

Headquarter : INTELEK.CZ s.r.o., Olivova 2096/4, Nové Město (Praha 1), 110 00 Praha, CZ
Branch : INTELEK.CZ s.r.o., Ericha Roučky 1291/4, 627 00 Brno, CZ
WEB : http://www.iget.eu
SUPPORT : http://www.iget.eu/helpdesk

FAQ

Q: Where can I find the warranty sheet and user manual
A: The warranty sheet and user manual are included in the phone package.

Q: How do I update the device software
A: It is recommended to update your device as soon as a new version of the software is available. To update the software, follow the instructions provided in the user manual or visit the support website at http://www.iget.eu/helpdesk. constitute an integral part of this Warranty Card.