iGET Kid F10 SmartWatch User Guide
- June 6, 2024
- iGET
Table of Contents
iGET Kid F10 SmartWatch
Basic information:
Individual technical parameters, the description of the phone and the design
may differ depending on the different versions of the phone and updates.
Precise specifications and other information can be found on website
www.iget.eu. Misprints reserved.
KID F10 has a degree of protection IP68, does not guarantee 100% water
resistance in every conditions! (According to manufacturer 1,5 m depth for 30
minutes, IP68 resistance does not apply to salt water.) After contact with
water or other liquid, we recommend that the watch be dried and check that the
charging contact is dry before charging. The warranty does not apply to
intentional damage to smart watches.After the first start of your smart watch
and after pairing with iGET FIT, check for a possible software update. Do not
disconnect the device from the mobile phone or move away from the BT signal
during the update.
The buyer is obliged to provide a serial number on the warranty card as well as in the delivery note and the proof of purchase. In this context, the buyer acknowledges that unless the serial number of goods is not marked on the proof of purchase, delivery note and in the warranty card and therefore it cannot be possible to compare this serial number marked on goods and its protective packaging with the serial number stated in the warranty card, delivery note and the proof of purchase and thus to verify that the goods runs from the seller, the service center is competent to claim such a goods automatically and reject it immediately. The buyer must instruct all persons to whom the goods would be subsequently sold. Product complaints do with your dealer if you are not on the web www.iget.eu indicated otherwise. The warranty card is on the last pages of this manual.
Safety warnings:
- The small parts of the watch can cause suffocation.
- Do not expose your watch to open fire.
- The watch can produce a loud sound.
- The watch is not resistant to metal fillings.
- Avoid exposure to magnetic fields.
- Avoid extreme temperatures (-10°C, +40°C).
- On request, turn off your watch in hospitals and other medical facilities.
- Do not dismantle the watch.
- Use the watch only with certified equipment.
- Do not reckon only upon your watch during emergency situations.
- In case of any change in the watch’s dimensions due to overheating, stop using the appliance until the battery is replaced.
Damages requiring professional repair:
If such cases may occur, please, contact the authorized service or your
distributor:
- Moisture got into the watch.
- The watch is mechanically damaged.
- The watch is extremely overheated.
For household use: The given symbol (crossed-out wheeled bin) on the product or at accompanying documents means that used electrical and electronic products should not disposed of with household waste. To ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted free of charge. The correct disposal of this product will help to save valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of wastes. For more details, please, contact your local authorities or the nearest collection point.
The improper disposal of this waste can be penalized in accordance with national regulations. Information for users to disposal of electrical and electronic devices (corporate and business use): For proper disposal of electrical and electronic devices, ask for details from your dealer or distributor. Information for users to disposal of electrical and electronic devices in other countries outside EU: The above mentioned symbol (crossed-out wheeled bin) is valid only in the countries of EU. For proper disposal of electrical and electronic devices, ask for details from your authorities or dealer. All is expressed by the symbol of crossed-out wheeled bin on product, packaging or in printed materials. Set up the claim for warranty repair of device at your dealer. If you have technical questions or problems, contact your dealer. Follow the rules for working with electrical equipment. The user may not dismantle the device or replace any part of this. Opening or removing the covers poses the risk of electric shock. In case of incorrect reassembly and subsequent connection you are also exposed to electric shock.
Declaration of Conformity:
Company INTELEK spol. s r.o. hereby declares that all KID F10 devices are in
compliance with essential requirements and other relevant provisions of
Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is available on this
website www.get.EU. The warranty period of the product
is 24 months, unless stated otherwise.
RoHS:
The components used in the device meet the requirements on the restriction of
hazardous substances in electrical and electronic devices in accordance with
Directive 2011/65/EU, 2015/863/EU. The RoHS declaration can be downloaded from
www.iget.eu.
This device can be used in the following countries:
Basic functions and use
Turning on
Long press the side button to turn on the bracelet.
Turning off
Press and hold the side button to turn off the bracelet. Or go to MENU and
select the setting icon (gear), then the System and Off menu.
Charging
Connect the metal pins of the USB cradle with the metal points on the back of
the bracelet until the charging icon appears on the screen. Allow the watch to
charge for at least 1 hour before using it for the first time.
Install iGET FIT on your phone.
Download: For Android devices, find the iGET FIT app in the Google play store.
For iOS devices, look for the iGET FIT app on the App Store.
Connecting thebracelet with a mobile phone
Allow Bluetooth in the phone. For correct functionality, please fill in all
data in profile and allow to app the access to all authorization. In case you
cannot find the device, enable the location detection. In the maim menu click
on „device“ and choose your smart bracelet. Follow the steps, search the
device name and connect it. Do not connect the watch in the Bluetooth settings
on the mobile phone, but always using the iGET FIT
application!
When pairing the watch in the Bluetooth settings on the mobile phone, first pair the watch and pair it again using the application.
Disconnect the bracelet from your mobile phone
Open “iGET FIT” on your phone. In the main menu, click on “Device” and then on
„Unpair“. In the Bluetooth settings of the phone, select “Forget device”.
Introduction of functions
You can lift your hand / press the side button to turn on the screen.
The display is full touch, touch the icon to confirm the selection.
Basic navigation
-
Drag the touchpad from right to left to enter the MENU.
-
Drag from left to right to enter the list style menu (daily activity, heartbeat, sleep etc.).
-
Drag from the bottom up to enter the notification center, daily activity, heartbeat, sleep.
-
Drag from top to bottom to enter the quick setup menu.
-
Press the side button to return to the home screen.
-
Dialer
You can change the dial and choose the appropriate design by long pressing the touch screen on the main screen. -
Pedometer
The bracelet will record your daily activity automatically. Press the touch key: switch between the interfaces: Steps, Calories, and Distance. After synchronizing with iGET FIT, you can check your sports data on your smartphone. Measured data are only indicative. -
Heart rate
Go to MENU. Selecting the heart rate icon starts the heart rate measurement.You can immediately see the heartbeat data on your bracelet. After syncing with iGET FIT, you can check the heart rate data in your phone. The measured data is only indicative. -
Notifications
To switch to the message interface, go to MENU and click on icon for messages. Here you can view notifications including incoming calls, SMS, QQ and Wechat, Whatsapp and other. -
Multi-Sport mode
Go to MENU. Selecting a SPORTS icon you will get to the activity subsection.The bracelet has six activities: walking, running, hiking, cycling, basketball, free sport. You can choose the mode you need, then go to the sport, the bracelet records sports data. To complete this exercise, press the touch key to stop and save the exercise.
Note: If the sporting time is shorter than 5 min, the data will not be saved.
-
Upload a watch face from the application
Connect the watch to iGET FIT and select the Customize Dial menu, select the dial you like in this menu. -
Games
Go to MENU. Select the game icon to find 8 pre-installed games. -
Alarm
You can set ten alerts in APP iGET FIT in the „Device“ menu. When the alarm is on, the bracelet will vibrate at that time. -
Gesture control
In APP iGET FIT menu „Device“ you can set the style of gesture: -
Wrist Rotation:
When the wrist is rotated, the screen lights up. -
Sleep
Go to the MENU and under the “Sleep” icon you can check your sleep data. -
Weather
In the MENU under the “Weather” icon you can check the current weather status for your location. The function is active only when the device is connected to mobile applications and the Internet. -
Luminance adjustment
Drag from top to bottom to enter the quick setup menu. There you can adjust the intensity of the display backlight by clicking on the brightness symbol. -
Sport record
In the MENU, after clicking on the “Sport record” icon, you will see a list of past activities. -
Body temperature
In the MENU, after clicking on the “Body temperature” icon, you can measure your body temperature. The measurement takes 60 seconds before the resulting temperature is displayed. The measured data is for guidance only. -
Timer
In the MENU, after clicking on the “Timer” icon, you will start a preset countdown or set your own. -
Blood pressure and blood oxygen
The watch can measure blood pressure and blood oxygen. The measured data are for guidance only and cannot be used as a substitute for medical equipment. -
Android settings when disconnecting the watch from the application
Detailed solution here
If the watch cannot be switched on, updated or charged, please contact us at the helpdesk.intelek.CZ.
Producer / exclusive importer of iGET products to EU:
INTELEK spol. s r.o., Ericha Roučky 1291/4, 627 00 Brno – Černovice, CZ
Web : http://www.iget.eu
SUPPORT: http://www.iget.eu/helpdesk
Copyright©2021 INTELEK spol. s r.o. All rights reserved