IGET 84008079 Blackview TAB G6 Kids User Guide

IGET 84008079 Blackview TAB G6 Kids

OVERVIEW

Safety Precautions

1. Do not place heavy or sharp objects on the LCD /tablet and do not press your fingers onto screen (touchscreen) so as not to damage the touch layer or screen.

2. Do not expose your LCD / tablet to direct sunlight and heat radiation and do not cover it.

3. Do not use the tablet in an environment with higher or lower temperature than the recommended one: 10° C – 40° C.

4. Do not expose the tablet to dusty and humid environments over 85% including rain and liquids.

5. Do not use any corrosive cleaning agents for cleaning the LCD and tablet.

6. Do not expose the table to strong magnetic or electronic interferences.

7. Do not use other power adapters than those that are the part of the tablet. The supplied power source can only be connected to the electrical system, whose voltage
   corresponds to the source nameplate (100 V ~ 240 V, 50/60 Hz ± 1 Hz).

8. Keep the power adapter out of places with lower combustion and on the parts of human body, because the adapter is getting hot and can cause an injury. Keeps always the entire process of device charging under control, so that to avoid personal injury and property damage due to fire or electric breakdown from the outlet.

9. Do not use the tablet while eating or drinking.

10. The tablet should not be used in activities that need special attention and caution, and place greater demands on visual perception during activities.

11. The tablet should not be used when walking, cycling, driving or during other means of transport, and when operating any mechanism or equipment.

12. When using a headset with the tablet, it is recommended to not set a high volume because the user will no longer completely perceive the surrounding environment and all possible risks.

13. Keep out of the reach of children.

14. If the tablet was for some time in the environment with a lower temperature than 10° C, leave this tablet off in a room at temperature 10 – 40° C for more than two hours. Only then you can switch it on.

15. Set up the claim for warranty repair of device at your dealer. If you have technical questions or problems, contact your dealer.

16. For household use: The given symbol (crossed-out wheeled bin) on the product or at accompanying documents means that used electrical and electronic products should not be disposed of with household waste. To ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted free of charge. The correct disposal of this product will help to save valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of wastes. For more details, please, contact your local authorities or the nearest collection point. The improper disposal of this waste can be penalized in accordance with national regulations. Information for users to disposal of electrical and electronic devices (corporate and business use): For proper disposal of electrical and electronic devices, ask for details from your dealer or distributor. Information for users to disposal of electrical and electronic devices in other countries outside EU: The above -mentioned symbol (crossed-out wheeled bin) is valid only in the countries of EU. For proper disposal of electrical and electronic devices, ask for details from your authorities or dealer. All is expressed by the symbol of crossed-out wheeled bin on product, packaging or in printed materials.

17. Do not increase a volume to the extent causing the hearing damage.

18. Charge the batteries only when they are exhausted (shown with a red icon in the interface) or they are charged to 10 – 15% and when the device is off.

19. Not designed for use near water, e.g. next to a bath-tub, basin, sink, kitchen sink, in a wet basement or near a swimming pool.

20. Update your tablet as soon as a new version of software (Android) is available).

21. The buyer is obliged to provide a serial number on the warranty card as well as in the delivery note and the proof of purchase. In this context, the buyer acknowledges that unless the serial number of goods is not marked on the proof of purchase, delivery note and in the warranty card and therefore it cannot be possible to compare this serial number marked on goods and its protective packaging with the serial number stated in the warranty card, delivery note and the proof of purchase and thus to verify that the goods runs from the seller, the service center is competent to claim such a goods automatically and reject it immediately. The buyer must instruct all persons to whom the goods would be subsequently sold. Product complaints do with your dealer if you are not on the web www.igetl.eu indicated otherwise.
    Note – TAB G6 Kids includes a reinforced protective case, TAB G6 does not include a case

Other Precautions

Follow the rules for working with electrical devices and plug the power supply cord only to the corresponding electrical outlets. The user is not competent to dismantle the device or replace any part of it. When opening or removing the covers the risk of electric shock is threatening. The incorrect reassembly may also lead to your injury by electric shock. In case of necessary service intervention contact exclusively qualified service technicians. Any opening of the tablet or its modification has resulted in the loss of warranty and the manufacturer/distributor is not then liable for any consequences.

Declaration of Conformity

• Company INTELEK.CZ s.r.o. hereby declares that all TAB G6/G6 Kids devices are in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on this website www.iget.eu
• The warranty period of the product is 24 months unless stated otherwise.

This device can be used in the following countries:

Restrictions on WiFi use:

• Italy – The conditions for using the WiFi network are described in the so-called Electronic Communications Code
• Norway – The 2.4 GHz limitation applies only to the area 20 km from the colony of Ny-Ålesund.
• When using a radio device in the 5150-5350 MHz frequency range, use is limited to indoor spaces only.
• RoHS:
• The components used in the device meet the requirements on the restriction of hazardous substances in electrical and electronic devices in accordance with Directive
• 2011/65/EU. The RoHS declaration can be downloaded from www.iget.eu

Operation of radio equipment:

• CZ: This radio equipment can be operated in the Czech Republic under the General Authorizations VO-R / 1 / 05.2017-2 and VO-R / 12 / 09.2010-12.
• SK: This radio equipment can be operated under General Authorizations VPR – 07/2014, VPR – 02/2017 and VPR – 35/2012.

Maximum EIRP:

• Max. 2W.

Frequency range:

• GMS: 850/900/1800/1900 MHz,
• WCDMA: 900/2100 MHz,
• LTE: 800/900/1800/2100/2600 MHz,
• 2.4G WiFi (20 MHz): 2412 – 2472 MHz
• 2.4G WiFi (40 MHz): 2422 – 2462 MHz
• 5G WiFi (20 MHz) 5180 – 5240 MHz
• 5G WiFi (40 MHz) 5190 – 5230 MHz
• 5G WiFi (80 MHz) 5210 MHz

Maintenance of Display

• Use a soft cloth, preferably with a microfiber to wipe the tablet and prevent screen scratches. Do not wipe the touchscreen by hands. Never clean the touchscreen with aggressive cleaners and sprays. If you spill the tablet by water turn it off immediately. Dry the entire tablet carefully using absorbent paper or a soft cloth and leave it dry for several hours. To dry do not use a hair dryer, a high temperature could damage it.

Description of Tablet

• Tablet TAB G6/G6 Kids (i.e. Schematic page 2.)

First Quick Settings

• Settings:

1. Setting of language + keyboard
   Settings – System – Languages & input – Languages – English

2. Wi-Fi setting
   Settings – Wi-Fi – turn on with a dot – Wi-Fi will turn on – select the desired network – enter the password – confirm – connect

3. Application installation
   

4. from Google Play (you must have created and registered google account / email)

5. Deleting the application
   Press and hold the app on the desktop and move your finger up to uninstall it and release the app

The basic operation of the tablet:

1. Switch on
   • long press of the on/off button (see drawing on page 4)
2. Sleep button
   • shortly press the power button
3. Wake up
   • shortly press the button to turn on + unlock by swiping up on the display
4. Switch off
   • long press of the on / off button

Camera:

• Do not use manual focus while shooting a video, you may hear camera focusing in the video. The camera is equipped with autofocus and there is no need to focus manually during shooting.
• Memory card / SIM installation:
• The tablet must be turned off when inserting and removing the SIM / SD card. When the tablet is turned off, you can insert a microSD expansion card and a SIM card.
• The card slot needs to be removed using the clip from the package. Then insert the cards into the slots and slide the card slot back into the tablet. Make sure the sides are oriented correctly!

First turn on the tablet:

• Allow the tablet to charge for at least 15 minutes before using it for the first time, otherwise the tablet may not start.

Tablet charging:

• The tablet is equipped with an intelligent charging system. If the battery is completely discharged, it is necessary to let the tablet charge for a longer time. The system charges the battery with a small current to a certain level to regenerate, and only then the “fast” charging is started. The tablet cannot be turned on in the first phase. The tablet can only be switched on when an image with a battery with at least 2% charge appears on the display. This can take up to 40 minutes in total. This charging system significantly extends battery life. To maintain the capacity of the tablet battery for as long as possible, it should not be allowed to discharge below 10%.
• Google, Android and Google Chrome are trademarks of Google LLC.
• Manufacturer:
• Shenzhen DOKE Electronic Co., Ltd
• 13/F, Wei Dong Long Business Building B, Mei Long Ave, Longhua New District, Shenzhen China
• Exclusive importer/producer of its products to EU: INTELEK.CZ s.r.o.,
• Headquarters: Olivova 2096/4, 11000 Praha – Nové Město, CZ,
• WEB:http://www.iget.eu
• SUPPORT:http://www.iget.eu/helpdesk
• Copyright © 2022 INTELEK.CZ s.r.o.
• All rights reserved.

WARRANTY CARD

Information for Customers about Warranty Terms and Conditions:

• Warranty shall apply to defects of purchased product, found during its warranty period.

• When purchasing a particular product, please consider carefully what properties and functions you expect your product to have. The fact that purchased product shall not satisfy your later requirements shall not give any reason for complaint. Please, prior to the first use of this product read carefully its operating instructions and follow these instructions consistently.

• We recommend you to keep original product packing during the warranty period for possible transport of the product in such a way so as to prevent any product damage during its transport and handling.

• For the purpose of due application of any complaint about the product we recommend you to ask Seller to fill-in and confirm this Warranty Card including identification of serial number of purchased product, which shall comply with the serial number specified both in the document proving product purchase and delivery note and purchased product.

• In this connection Customer hereby takes into account that unless this Warranty Card specifies serial number of purchased product, i.e., comparison of such serial number identified in the product with the serial number identified in this Warranty Card and document of product purchase/or delivery note shall not allow to confirm that particular product has come from Seller, in case of any doubts about the origin of such particular product Seller shall be entitled to automatically and without any other acts to reject the complaint of such goods.
  Warranty shall not apply to:

• product damage suffered by unqualified installation of firmware or its modification;

• product damage by static electricity;

• product use for any other purposes than designed, described in attached operating instructions;

• damage to warranty seal of the producer, attached to the product;

• product damage inconsistent with the operating instructions, technical standards or safety regulations valid in the country where was the product sold;

• product damage resulting from normal wear and tear;

• discharged batteries, decrease in battery capacity caused by its wear and tear;

• product defects caused by the use in dusty, polluted or in any other way dissatisfactory environment pursuant to attached operating instructions.

• Wear and tear of the product and its components caused by their common use (discharged batteries, decreased capacity of accumulator, wear and tear of mechanical or displaying components, wear and tear of supply cables, headphones etc.) shall be subject neither to defect warranty nor quality warranty in the moment of take-over.

• Furthermore, complaints about product parameters, not included in the operating instructions or in any commercial-technical documentation of Seller, related to the

• product, shall not be subject to quality warranty in the moment of take-over.

• Proof of product purchase, or delivery note, shall constitute an integral part of this Warranty Card.

References

• KOMPONENTY DATOVÝCH A TELEKOMUNIKAČNÍCH SÍTÍ | Intelek
• iGET chytré zabezpečení a spotřební elektronika
• iGET chytré zabezpečení a spotřební elektronika
• Helpdesk redirect - iGET.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>