iGET CS1 HOME Camera User Guide
- October 30, 2023
- iGET
Table of Contents
iGET CS1 HOME Camera User Guide
Camera CS1 Mini consult the checklist below for all components:
(*) After adjusting your camera angle, please lock this screw
- Fix the camera to the wall with screws.
- Adjust camera angle to a correct view (as shown in the picture).
Set up router
The router supports the 2.4GHz Wi-Fi (doesn´t support the 5GHz), and is connected to the Wi-Fi network. Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your Wi-Fi.
Registration process
-
Open the iGET HOME, click “Register”, read the “Privacy Policy” and click “Agree”.
-
Input a legal and valid Mobile number or Email address and click “Continue”. Input Verification Code, then log in the app.
-
Open the iGET HOME APP click “Armed” >> “Add Device” or by clicking on “Device” >> “Add Device”.
-
Click “Add Device” or “+”, and then select “Camera” >> choose your model to add camera.
-
Power on and reset camera until the status indicator is flashing quickly or a prompt tone is heard, and then click “Next”. Then input your Wi-Fi’s passwords and click “Next”. Click ” ” to change network.
Note: – Camera only supports 2.4GHz Wi-Fi network. – The number of bits in the SSID and passwords of the routershould not exceed 24 digits. -
In this interface, you should scan the QR code in your phone with the camera, when the camera comes out “dong dong”. And you can complete the configuration about 30s.
-
When connecting, you should make sure your router, mobile, and camera are as close as possible. When camera added successfully, click ” ” you could also change the camera’s name.
In “Security Camera” interface, click ” “, you can set the camera common
functions.
FAQ Frequently Asked Questions
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device again by the App.
Q: Why doesn't the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the Internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened.
Cameras CS1 and CS6:
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Support smart motion detection. The camera will detect movements, and then send you push notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage or Cloud storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision technology.
Camera CS9:
Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview in App.
Full-duplex audio
You can see and hear the visitor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message to your cell phone.
Low battery alarm
When the battery power is lower than your set, the App will send a notification to your mobile phone.
Record
Using SD card or opening the Cloud-Storage Service, to keep recording for every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness
VI. Warranty Rules
For household use: The given symbol (crossed-out wheeled bin) on the product
or at accompanying documents means that used electrical and electronic
products should not disposed of with household waste. To ensure proper
disposal of the product, hand it over to a designated collection point, where
it will be accepted free of charge. The correct disposal of this product will
help to save valuable natural resources and prevent any potential negative
impacts on the environment and human health, which could otherwise be caused
by inappropriate disposal of wastes. For more details, please, contact your
local authorities or the nearest collection point. The improper disposal of
this waste can be penalized in accordance with national regulations.
Information for users to disposal of electrical and electronic devices
(corporate and business use): For proper disposal of electrical and electronic
devices, ask for details from your dealer or distributor. Information for
users to disposal of electrical and electronic devices in other countries
outside.
EU: The above mentioned symbol (crossed-out wheeled bin) is valid only in the
countries of EU. For proper disposal of electrical and electronic devices, ask
for details from your authorities or dealer. All is expressed by the symbol of
crossed-out wheeled bin on product, packaging or in printed materials.
Set up the claim for warranty repair of device at your dealer. If you have
technical questions or problems, contact your dealer. Follow the rules for
working with electrical equipment. The user may not dismantle the device or
replace any part of this. Opening or removing the covers poses the risk of
electric shock. In case of incorrect reassembly and subsequent connection you
are also exposed to electric shock.
Declaration of Conformity: Company INTELEK.CZ s.r.o. hereby declares that CS1, CS6, CS9 devices are in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on this website www.iget.eu. The warranty period of the product is 24 months, unless stated otherwise. This device can be used in the following countries bellow. Italy – The conditions for using the WiFi network are described in the so-called Electronic Communications Code Norway – The 2.4 GHz limitation applies only to the area 20 km from colony of Ny-Ålesund. RoHS: The components used in the device meet the requirements on the restriction of hazardous substances in electrical and electronic devices in accordance with Directive 2011/65/EU. The RoHS declaration can be downloaded from www. iget.eu. Operation of radio equipment: CZ: This radio equipment can be operated in the Czech
Republic under the General Authorizations VO-R / 1 / 05.2017-2 and VO-R / 12 / 09.2010-12. SK: This radio equipment can be operated under General Authorizations VPR – 07/2014, VPR – 02/2017 and VPR 35/2012. Maximum EIRP: Max. 2W Frequency range: EIRP: Max. 2 W, 2.4G Wi-Fi (20 MHz): 2412 2472 MHz, 2.4G Wi-Fi (40 MHz): 2422 2462 MHz. Producer / Exclusive importer of iGET products to EU: INTELEK.CZ s.r.o., Olivova 2096/4, Nové Msto Praha 1, CZ web: http://www.iget.eu SUPPORT: http://www.iget.eu/helpdesk Copyright© 2022 INTELEK.CZ s.r.o. All rights reserved.
References
- iGET chytré zabezpečení a spotřební elektronika
- KOMPONENTY DATOVÝCH A TELEKOMUNIKAČNÍCH SÍTÍ | Intelek
- iGET chytré zabezpečení a spotřební elektronika
- iGET chytré zabezpečení a spotřební elektronika
- Helpdesk redirect - iGET.eu