iGET SP2 HOME Solar User Manual

: October 30, 2023
: iGET

Table of Contents

What’s in the box
Safety precautions and Warranty Rules
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Solar SP2
QUICK GUIDE

iGET SP2 HOME Solar

What’s in the box

iGET SP2 HOME Solar - box conntents

The Northern Hemisphere
The Ideal Angle = The Local Latitude + 5° The Southern Hemisphere
Step 1
Please select a position with the most sunlight throughout the year for your solar panel. The solar panel only needs a few hours of direct sunlight to sufficiently power your camera daily.
The amount of energy that the solar panel can produce is affected by weather conditions, seasonal changes, geographic locations, etc.
Step 2
Mount the bracket with the mount- ing template and the screws provided in the package.
Step 3
Slot the solar panel into the bracket and make sure the security.
Step 4
Loosen the adjusting control on the bracket and adjust the angle of the solar panel to make it receive direct sunlight, and then re-tighten the adjusting control to secure your setting.
iGET SP2 HOME Solar - adjusting control A: Lock
B: Unlock

Safety precautions and Warranty Rules

For household use: The given symbol (crossed-out wheeled bin) on the product or at accompanying documents means that used electrical and electronic products should not disposed of with household waste. To ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted free of charge. The correct disposal of this product will help to save valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of wastes. For more details, please, contact your local authorities or the nearest collection point. The improper disposal of this waste can be penalized in accordance with national regulations. Information for users to disposal of electrical and electronic devices (corporate and business use): For proper disposal of electrical and electronic devices, ask for details from your dealer or distributor. Information for users to disposal of electrical and electronic devices in other countries outside.
EU: The above mentioned symbol (crossed-out wheeled bin) is valid only in the countries of EU. For proper disposal of electrical and electronic devices, ask for details from your authorities or dealer. All is expressed by the symbol of crossed-out wheeled bin on product, packaging or in printed materials.
Set up the claim for warranty repair of device at your dealer. If you have technical questions or problems, contact your dealer. Follow the rules for working with electrical equipment. The user may not dismantle the device or replace any part of this.
Opening or removing the covers poses the risk of electric shock.
In case of incorrect reassembly and subsequent connection you are also exposed to electric shock.
Declaration of Conformity: Company INTELEK.CZ s.r.o. hereby declares that all Solar SP2 devices are in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on this website www.iget.eu.
The warranty period of the product is 24 months, unless stated otherwise.
RoHS: The components used in the device meet the requirements on the restriction of hazardous substances in electrical and electronic devices in accordance with Directive 2011/65/EU. The RoHS declaration can be downloaded from www. iget.eu.

Operation of radio equipment:
Producer / Exclusive importer of iGET products to EU:
INTELEK.CZ s.r.o., Olivova 2096/4, Nové Město – Praha 1, CZ
web: http://www.iget.eu
SUPPORT: http://www.iget.eu/helpdesk
Copyright© 2022 INTELEK.CZ s.r.o. All rights reserved.