iGET FIT F30 Silver Smartwatch User Guide
- June 6, 2024
- iGET
Table of Contents
FIT F30
QUICK START GUIDE
The complete user guide can be found on our website in PDF format.
www.iget.eu
SUPPORT: http://www.iget.eu/helpdesk
Basic information:
Individual technical parameters, the description of the phone and the design
may differ depending on the different versions of the phone and updates.
Precise specifications and other information can be found on website
www.iget.eu. Misprints reserved.
The FIT F30 is IP68 certified on the basis of EN
60529:1991+A2:2013+AC:2019. The IP68 rating does not guarantee 100%
water resistance under any conditions!
(According to manufacturer 1,5 m depth for 30 minutes, IP68 resistance does
not apply to salt water.) After contact with water or other liquid, we
recommend that the watch be dried and check that the charging contact is dry
before charging. The warranty does not apply to intentional damage to smart
watches.
After the first start of your smart watch and after pairing with iGET
GO, check for a possible software update. Do not disconnect the device
from the mobile Phone or move away from the BT signal during the update.
The buyer is obliged to provide a serial number on the warranty card as
well as in the delivery note and the proof of purchase.
In this context, the buyer acknowledges that unless the serial number of goods
is not marked on the proof of purchase, delivery note and in the warranty card
and therefore it cannot be possible to compare this serial number marked on
goods and its protective packaging with the serial number stated in the
warranty card, delivery note and the proof of purchase and thus to verify that
the goods runs from the seller, the service center is competent to claim such
a goods automatically and reject it immediately. The buyer must instruct all
persons to whom the goods would be subsequently sold. Product complaints do
with your dealer if you are not on the web www.iget.eu
indicated otherwise. The warranty card is on the last pages of this manual.
Safety warnings:
- The small parts of the watch can cause suffocation.
- Do not expose your watch to open fire.
- The watch can produce a loud sound.
- The watch is not resistant to metal fillings.
- Avoid exposure to magnetic fields.
- Avoid extreme temperatures (-10°C, +40°C).
- On request, turn off your watch in hospitals and other medical facilities.
- Do not dismantle the watch.
- Use the watch only with certified equipment.
- Do not reckon only upon your watch during emergency situations.
- In case of any change in the watch’s dimensions due to overheating, stop using the appliance until the battery is replaced.
Damages requiring professional repair:
If such cases may occur, please, contact the authorized service or your distributor:
- Moisture got into the watch.
- The watch is mechanically damaged.
- The watch is extremely overheated.
For household use: The given symbol (crossed-out wheeled bin) on the product or at accompanying documents means that used electrical and electronic products should not be disposed of with household waste. To ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted free of charge. The correct disposal of this product will help to save valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of wastes. For more details, please, contact your local authorities or the nearest collection point. The improper disposal of this waste can be penalized in accordance with national regulations.
Information for users to disposal of electrical and electronic devices
(corporate and business use):
For proper disposal of electrical and electronic devices, ask for details from
your dealer or distributor.
Information for users to disposal of electrical and electronic devices in
other countries outside EU: The above mentioned symbol (crossed-out wheeled
bin) is valid only in the countries of EU. For proper disposal of electrical
and electronic devices, ask for details from your authorities or dealer. All
is expressed by the symbol of crossed-out wheeled bin on product, packaging or
in printed materials. Set up the claim for warranty repair of device at your
dealer. If you have technical questions or problems, contact your dealer.
Follow the rules for working with electrical equipment. The user may not
dismantle the device or replace any part of this. Opening or removing the
covers poses the risk of electric shock. In case of incorrect reassembly and
subsequent connection you are also exposed to electric shock.
Declaration of Conformity:
Company INTELEK spol. s r.o. hereby declares that all FIT F30 devices are in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on this website www.iget.eu.
The warranty period of the product is 24 months, unless stated otherwise.
RoHS:
The components used in the device meet the requirements on the restriction of
hazardous substances in electrical and electronic devices in accordance with
Directive 2011/65/EU, 2015/863/EU. The RoHS declaration can be downloaded from
www.iget.eu.
This device can be used in the following countries:
AT
| BE| CY| CZ| DK| EE| Fl| MT| NL| PL| PT|
SK
---|---|---|---|---|---|---|---|---|---|---|---
SI
| ES| DE| GR| HU| IE| IT| LV| LT| GB| IS|
LI
NO| CH| BG| HR| RU| RO| FR| SE| LU| TR| |
Basic functions and use
Turning on
Long press the side button to turn on the bracelet.
Turning off
Press and hold the side button to turn off the bracelet. Or go to MENU and
select the setting icon (gear), then the System and Off menu.
Charging
Connect the metal pins of the USB cradle with the metal points on the back of
the bracelet until the charging icon appears on the screen.
Install iGET GO on your phone.
Download: Find the iGET GO application or scan the following QR code for
installation.
Android
|
iOS
---|---
https://play.google.com/store/apps/details?id=com.oplayer.igetgo
|
https://itunes.apple.com/us/app/iget- go/id1408632517?l=zh&ls=1&mt=8
Combination of a bracelet with a mobile phone
Allow Bluetooth in the phone. For correct functionality, please fill in all
data in profile and allow to app the access to all authorization. In case you
cannot find the device, enable the location detection. Tap on the item
“Connect the device” in the Settings. Choose the band connection. Follow the
steps, search the device name and connect it.
Do not connect the watch in the Bluetooth settings on the mobile phone,
but always using the iGET GO application!
When pairing the watch in the Bluetooth settings on the mobile phone, first
pair the watch and pair it again using the application.
Disconnect the bracelet from your mobile phone
Open “iGET GO” on your phone. In Settings, click “Disconnect Device”. In the
Bluetooth settings of the phone, select “Forget device”.
Introduction of functions
You can lift your hand / press the side button to turn on the screen.
The display is full touch, touch the icon to confirm the selection.
Basic navigation
Drag the touchpad from right to left to enter the MENU.
Drag from left to right to enter the list style menu.
Drag from the bottom up to enter the notification center.
Drag again to enter the heart rate record and drag again to view daily
activities
Drag from top to bottom to enter the quick setup menu.
Press the side button to return to the home screen.
Dialer
You can change the dial and choose the appropriate design by long pressing the
touch screen on the main screen.
Pedometer
The bracelet will record your daily activity automatically. Press the touch
key: switch between the interfaces: Steps, Calories, and Distance. After
synchronizing with iGET GO, you can check
your sports data on your smartphone. Measured data are only
indicative.
Heart rate
Go to MENU. Selecting the heart rate icon starts the heart rate
measurement.You can immediately see the heartbeat data on your bracelet. After
syncing with iGET GO, you can check the heart rate data in your phone.
Measured data are only indicative.
Notifications
To switch to the message interface, go to MENU and click on icon for messages.
Here you can view notifications including incoming calls, SMS, QQ and Wechat,
Whatsapp and other.
Multi-Sport mode
Go to MENU. Select the Sports icon to go to the activities subsection. The
bracelet has six activities: walking, running, hiking, biking, indoor running
and swimming. You can choose the mode you need and touch to start the
activity, the bracelet records the sports data. Drag from left to right on the
touch screen to go to the screen where you can end or pause the activity.
Note: If the sports time is shorter than 5 minutes, the data will not be
saved. The bracelet does not have GPS, the measured data are for guidance
only.
Find phone
In the MENU, select the “Settings” icon and then the blue mobile phone icon –
Find your phone. If the bracelet is paired with iGET GO, your phone will start
ringing.
Sedentary reminder
You can set this reminder in iGET GO – Advanced Settings
Drink notification
You can set a drinking mode reminder in iGET GO – Advanced settings.
Alarm
You can set up five alarms on iGET GO.
Gesture control
You can set the style of gesture used in iGET GO:
Hand lift: When the hand is lifted, the screen lights up.
Wrist Rotation: When the wrist is rotated, the screen lights up.
Sleep
Go to the MENU and under the “Sleep” icon you can check yoursleep data.
Weather
In the MENU under the “Weather” icon you can check the current weather status
for your location. The function is active only when the device is connected to
mobile applications and the Internet.
Music
In the MENU under the “MUSIC” icon you can remotely control the music player
in your phone.
Stopwatch
In the basic MENU, after clicking on “STOPWATCH”, you can start tracking the
time or start the countdown.
Luminance adjustment
Drag from top to bottom to enter the quick setup menu. There you can adjust
the intensity of the display backlight by clicking on the brightness symbol.
Android settings when disconnecting the watch from the application
Detailed solution here http://www.iget.eu/cs/optimalizace-odpojovani-hodinek-
od-telefonu
If the watch cannot be switched on, updated or charged, please contact us at
helpdesk.intelek.cz.
WARRANTY CARD
Product:
|
---|---
Serial / Batch number:
| (S/N)
Warranty until:
|
Sale document number:
|
Model:
|
Date of sale:
|
Seal of the store:|
Information for Customers about Warranty Terms and Conditions:
Warranty shall apply to defects of purchased product, found during its
warranty period. When purchasing a particular product, please consider
carefully what properties and functions you expect your product to have. The
fact that purchased product shall not satisfy your later requirements shall
not give any reason for complaint. Please, prior to the first use of this
product read carefully its operating instructions and follow these
instructions consistently. We recommend you to keep original product
packing during the warranty period for possible transport of the product
in such a way so as to prevent any product damage during its transport and
handling.
For the purpose of due application of any complaint about the product we
recommend you to ask Seller to fill-in and confirm this Warranty Card
including identification of serial number of purchased product, which shall
comply with the serial number specified both in the document proving product
purchase and delivery note and purchased product.
In this connection Customer hereby takes into account that unless this
Warranty Card specifies serial number of purchased product, i.e., comparison
of such serial number identified in the product with the serial number
identified in this Warranty Card and document of product purchase/or delivery
note shall not allow to confirm that particular product has come from Seller,
in case of any doubts about the origin of such particular product Seller shall
be entitled to automatically and without any other acts to reject the
complaint of such goods.
Warranty shall not apply to:
product damage suffered by unqualified installation of firmware or its
modification;
product damage by static electricity;
product use for any other purposes than designed, described in attached
operating instructions;
damage to warranty seal of the producer, attached to the product;
product damage inconsistent with the operating instructions, technical
standards or safety regulations valid in the Czech Republic;
product damage resulting from normal wear and tear;
discharged batteries, decrease in battery capacity caused by its wear and
tear;
product defects caused by the use in dusty, polluted or in any other way
dissatisfactory environment pursuant to attached operating instructions.
Wear and tear of the product and its components caused by their common use
(discharged batteries, decreased capacity of accumulator, wear and tear of
mechanical or isplaying components, wear and tear of supply cables,
headphones etc.) shall be subject neither to defect warranty nor quality
warranty in the moment of take-over.
Furthermore, complaints about product parameters, not included in the
operating instructions or in any commercial-technical documentation of Seller,
related to the
product, shall not be subject to quality warranty in the moment of take-over.
In the event of any changes in the dimensions of the battery, discontinue use,
and until there is a change the battery with a new one.
Proof of product purchase, or delivery note, shall constitute an integral
part of this Warranty Card.
Producer / exclusive importer of iGET products to EU:
INTELEK spol. s r.o., Ericha Roučky 1291/4, 627 00 Brno -Černovice, CZ
Web: http://www.iget.eu
SUPPORT: http://www.iget.eu/helpdesk
Copyright © 2020 INTELEK spol. s r.o. All rights reserved.