XLINE CH303 Car Holder User Manual

XLINE CH303 Car Holder

Product Information

Specifications

• Model: UCHWYT SAMOCHODOWY CH303 (CAR HOLDER CH303)
• Maximum device size: Not specified
• Operating conditions: Domestic or similar, non-commercial use

Description

The UCHWYT SAMOCHODOWY CH303 (CAR HOLDER CH303) is a car holder designed to securely hold your device while driving. It features an adjustable mount and can be easily attached to your car’s windshield.

Safety and Hazard Conditions

To minimize the risk of fire, electric shock, or injury, please follow these safety guidelines:

1. Read the operating manual carefully before using the device.
2. Use the device according to its intended purpose and as instructed in the manual.
3. Only operate the device when you have a clear understanding of all related risks.
4. Keep the device out of reach of children. Children should not play with the device or carry out cleaning and maintenance without supervision.
5. Avoid placing the device or its equipment on unstable or hot surfaces or in their vicinity.

Foreword

Thank you for purchasing the UCHWYT SAMOCHODOWY CH303 (CAR HOLDER CH303). We are confident that this high-quality device will bring you joy and satisfaction during its use.
Please read and follow the operating manual carefully to ensure proper usage.

Product Usage Instructions

Mounting the Holder

1. Select a suitable location on your car’s windshield to mount the holder.
2. Clean the selected area on the windshield to ensure proper adhesion.
3. Remove the protective film from the suction cup on the holder.
4. Press the suction cup firmly against the windshield and lock it in place.

Adjusting the Holder

The holder can be adjusted to achieve the desired viewing angle. Follow these steps:

1. Loosen the adjustment knob located on the back of the holder.
2. Position your device in the holder and adjust it to the desired angle.
3. Tighten the adjustment knob to secure the position of the holder.

Mounting Your Phone

To mount your phone in the holder, follow these steps:

1. Open the holder’s arms by pressing the release button.
2. Place your phone between the arms and adjust them to securely hold your device.
3. Ensure that your phone is properly aligned and secured in the holder.

Troubleshooting

• Problem: The holder does not stick to the windshield.
• Possible Cause: The suction cup is dirty.
• Solution: Clean the suction cup before mounting it on the windshield.
• Problem: The holder becomes loose after adjustment.
• Possible Cause: The windshield is dirty.
• Solution: Clean the windshield before mounting the holder.
• Problem: The securing nut is not tightened enough.
• Possible Cause: The securing nut is not tightened sufficiently.
• Solution: Tighten the securing nut, but be careful not to overtighten it as it may cause damage.

Ecological Disposal and Warranty Terms

• Please refer to the warranty terms provided by the manufacturer for information on warranty coverage, repair procedures, and disposal guidelines. The warranty period is 24 months from the date of purchase.

Q: Can this car holder accommodate larger devices?

• A : The maximum device size is not specified in the manual. It is recommended to check the dimensions of your device and compare them with the holder’s dimensions before purchasing.

Q: Can I use this car holder in a commercial vehicle?

• A : The car holder is intended for domestic or similar, non-commercial use. It may not be suitable for use in commercial vehicles.

Q: What should I do if my device is not covered under warranty?

• A: If your device is not covered under warranty, please refer to the manufacturer’s instructions for repair or replacement options.
• The manufacturer will not be held liable for damages resulting from improper or non-compliant use.

Q: Is it necessary to keep the proof of purchase for warranty claims?

• A : Yes, it is important to keep the proof of purchase as it may be required for warranty claims or repairs.

SAFETY AND HAZARD CONDITIONS

To minimize the risk of fire, electric shock, fire, or injury:

1. Read the operating manual carefully before using the device.
2. Use the device according to its intended purpose described in the operating manual.
3. The device is not intended for industrial or laboratory use.
4. Do not immerse the device in water or other liquids.
5. Do not expose the product to harmful weather conditions. The device can be used in a car at temperatures of up to 65°C.
6. Do not install the device if it is damaged.
7. This product may only be operated by children 8 or more years old, mentally and/or physically deficient persons, and persons without knowledge of or experience in the operation of this appliance type if supervised or instructed in safe operation, with a clear understanding of all related risks. Children should not play with the device. Children without supervision should not carry out the cleaning and maintenance of the device.
8. Do not place the device or its equipment on unstable or hot surfaces or in their vicinity.

FOREWORD

• Thank you for the trust you have placed in us when purchasing your Xline device.
• We are convinced that it is a high-quality device and it will give you a lot of joy and satisfaction with its use.
• PLEASE CAREFULLY READ AND FOLLOW THE OPERATING MANUAL!
• This device is intended for domestic or similar, non-commercial use. The manufacturer will not be held liable for damages resulting from improper or non-compliant use.

TECHNICAL DATA

PRODUCT DESCRIPTION

1. Silicone suction cup
2. Flexible holder arm
3. Cockpit support
4. Stabilizing nut
5. Phone holder
6. Phone Stand
7. Side Arm Release Button

INSTALLING THE HOLDER

• To install the holder to the windshield of the car, unscrew the retaining ring and then insert the suction cup tip into the hole in the holder by tightening the counter screw clockwise. Mount the holder on the glass after cleaning and drying it. Remember to press the lock button after attaching the holder to the windshield.
• In addition, position the holder arm in such a way that the base of the arm stably rests on the cockpit of the car.

ADJUSTMENT

The holder has a flexible arm that can be bent to direct the phone in the desired position.

MOUNTING THE PHONE

To properly mount the phone in the holder, press the side arms release button, slide down the phone base, then place the phone in the holder on the base and press the sides of the holder. Make sure that the phone is firmly fixed in the holder.

TROUBLESHOOTING

suction cup.
Dirty glass.| Clean the glass.
After adjustment, the holder is loose.| The nut was not tightened.| Tighten the nut while being careful not to over-tighten it (as this may damage the nut).

ECO-FRIENDLY AND ENVIRONMENTALLY FRIENDLY DISPOSAL

By removing waste from the product in a compliant manner, you will help to avoid possible negative impacts on the environment and human health that could occur as a result of improper handling of this waste.
For further information regarding the recycling of waste from this product, please contact the municipal authorities in your area, the appropriate waste disposal service, or the supplier of the product.

WARRANTY CONDITIONS FOR THE CAR HOLDER

1. ART-DOM Sp. z o.o. with its registered office in 90/92 National Court Register Number 0000354059 (Guarantor) guarantees that the purchased device is free from physical defects.
   • The warranty covers only defects resulting from the causes inherent in the item sold (manufacturing defects).
2. A disclosed defect will be removed at the Guarantor’s expense within 14 days from the date of reporting the damage to the authorized service or point of sale.
3. In exceptional cases, e.g. the need to import spare parts from their manufacturer, the repair period may be extended up to 30 days.
4. The warranty period for the user is 24 months from the date of delivery of the goods.
5. The goods are intended for use only in the conditions of an individual household.
6. The present warranty does not cover:
   • a. damage caused by using the device in a manner inconsistent with the user manual,
   • b. mechanical, chemical, or thermal damage,
   • c. repairs and modifications made by companies or persons that were not authorized to do so by the manufacturer,
   • d. parts that are easy to use or consumables such as batteries, bulbs, fuses, filters, knobs, shelves, accessories,
   • e. installation, maintenance, inspection, cleaning, unlocking, removal of contaminants, and instruction.
7. The Guarantor will select the mode of defect removal at its own discretion. Removal of a confirmed defect of the device will take place through warranty repair or replacement of the device. The Guarantor may perform repairs when the buyer requests replacement or the Guarantor may perform replacements when the buyer requests repair if bringing the goods (device) into conformity in accordance with the granted warranty in the manner selected by the buyer is impossible or would require excessive costs at the part of Guarantor. In particularly justified cases, if both repair and replacement are impossible or would require excessive costs for the Guarantor, the Guarantor may refuse to bring the goods into compliance with the granted warranty and propose another way to settle the warranty claim.
8. The exchange of goods is made at the point of sale at which the goods were purchased (replacement or refund) or an authorized service point if it offers such service (replacement). The returned device must be complete, without mechanical damage. Failure to comply with these conditions may result in failure to accept the warranty claim.
9. In the event of non-compliance of the goods with the sales contract, the buyer is entitled by law to legal protection measures on the part and at the expense of the seller, and the warranty does not affect these legal protection measures.
10. The warranty is valid in Poland.
11. The condition for the warranty repair or replacement of the device is the presentation of proof of purchase and the use of the goods in accordance with the information contained in the user manual.

• CAUTION! Damage or removal of the rating plate from the device may result in the warranty being deemed void.
• We are constantly improving our products, so they may differ slightly from the images presented on the packaging and in the user manual.
• Please read the user manual carefully before operating the device.
• ART-DOM Sp. z o.o., ul. Zakładowa 90/92, 92-402 Łódź.
• National Court Register number 0000354059.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>