XLINE CH301 Car Holder Instruction Manual
- June 14, 2024
- XLINE
Table of Contents
- XLINE CH301 Car Holder
- Product Information
- SAFETY AND HAZARD CONDITIONS
- INTRODUCTION
- TECHNICAL DATA
- INSTALLATION
- ASSEMBLING THE HOLDER WITH A SUCTION CUP TO THE GLASS
- ADJUSTMENT
- ECO-FRIENDLY AND ENVIRONMENTALLY FRIENDLY DISPOSAL
- WARRANTY CONDITIONS FOR THE CAR HOLDER
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
XLINE CH301 Car Holder
Product Information
Specifications
- Model: UCHWYT SAMOCHODOWY CH301
- Minimal device size: N/A
- Maximum device size: N/A
- Arm span: N/A
- Maximum load capacity: N/A
- Operating conditions: N/A
Introduction
Thank you for choosing the Xline CH301 Car Holder. We are confident that this high-quality device will bring you joy and satisfaction during its use.
Safety and Hazard Conditions
To minimize the risk of fire, electric shock, or injury, please follow these safety guidelines:
- Carefully read the operating manual before using the device.
- Use the device according to its intended purpose described in the user manual.
- The device is not intended for industrial or laboratory use.
- Do not immerse the device in water or other liquids.
- Do not expose the product to harmful conditions.
- Keep the device out of reach of children and ensure they do not play with it.
- Children should not carry out cleaning and maintenance of the device without supervision.
- Do not place the device or its equipment on or near unstable or hot surfaces.
Installation
Mounting the Suction Cup Holder on the Windshield
Follow these steps to mount the suction cup holder on your windshield:
- Choose a suitable location on the windshield for mounting.
- Ensure the windshield is clean and dry.
- Press the suction cup firmly against the windshield.
- Engage the locking mechanism to secure the suction cup holder in place.
Adjustment
This car holder features a button for automatic extension of the side arms. Use this button to adjust the holder to the desired width of your device.
Eco-friendly Disposal
Please ensure that you dispose of this product in an environmentally friendly manner, following local regulations and guidelines.
Warranty Terms for the Car Holder
-
ART-DOM Ltd., located at Zakladowa 90/92, 92-402 Lodz, Poland, guarantees that the purchased device is free from physical defects.
The warranty covers only defects arising from causes inherent in the sold item (manufacturing defects). -
If a defect is discovered, it will be repaired at the expense of the guarantor within 14 days from the date of reporting the damage to an authorized service center or point of sale.
-
In exceptional cases, such as the need to import spare parts from the manufacturer, the repair period may be extended up to 30 days.
-
The warranty period for the end-user is 24 months from the date of product issuance.
-
This product is intended for use only in individual household conditions.
-
The warranty does not cover:
- Damages resulting from improper use of the device according to the user manual.
- Mechanical, chemical, or thermal damages.
- Repairs and modifications made by unauthorized companies or individuals.
-
In case the product does not comply with the sales agreement, the buyer is entitled to legal protection measures from the seller at the seller’s expense. The warranty does not affect these legal protection measures.
-
This warranty is valid only in Poland.
-
To be eligible for repairs or device replacement under warranty, the proof of purchase must be presented, and the product must be used in accordance with the instructions provided.
FAQ
Q: What is the maximum load capacity of the car holder?
A: The maximum load capacity of the car holder is not specified in the user manual.
Q: Can I use the car holder in an industrial or laboratory setting?
A: No, the car holder is not intended for industrial or laboratory use.
SAFETY AND HAZARD CONDITIONS
To minimize the risk of fire, electric shock, fire, or injury:
- Carefully read the operating manual before using the device.
- Use the device according to its intended purpose described in the user manual.
- The device is not intended for industrial or laboratory use.
- Do not immerse the device in water or other liquids.
- Do not expose the product to harmful weather conditions. The device can be used in a car at temperatures of up to 80°C.
- Do not install the device if it is damaged.
- This product may only be operated by children aged 8 or more, by mentally and/or physically deficient persons, and by persons without knowledge of or experience in operating this appliance provided that they are supervised and/or have been instructed in its safe operation, and as a result have clear understanding of all related risks. Children should not play with the device. Unsupervised chil-dren should not carry out the cleaning and maintenance of the device.
- Do not place the device or its equipment on or near unstable or hot surfaces.
INTRODUCTION
Thank you for the trust you have placed in us when you purchased your Xline
device.
We are convinced that this high quality device will provide you with a lot of
joy and satisfaction during its use.
PLEASE CAREFULLY READ AND FOLLOW THE USER MANUAL!
This device is intended for domestic or other non-commercial use. The
manufacturer will not be held liable for damages resulting from improper or
non-compliant use.
TECHNICAL DATA
- Model: CH301
- Minimum device size: 4”
- Maximum device size: 6,5”
- Spacing of handle arms: 4,5-9cm
- Maximum load capacity: up to 500g
- Operating conditions: -20°C to 80°C, RH up to 75%
INSTALLATION
The holder is used to mount it on the windshield of the car. To install the holder, unscrew the retaining ring, then insert the suction cup end into the hole in the holder by tightening the nut clockwise.
ASSEMBLING THE HOLDER WITH A SUCTION CUP TO THE GLASS
The holder should be mounted to cleaned and dried section of glass.
Place the suction cup side against the glass and press it down, then push the
suction cup mechanism as pictured below.
ADJUSTMENT
To open the handle arms automatically, press and hold the upper button. The
arms will automatically extend to the maximum distance.
Place the device in the handle and then gently close the side arms until you
feel resistance. Check the correct attachment of the phone in the holder so
that the lateral holding is stable and does not lead to the phone slipping out
of the holder and its damage.
Button for automatic extension of side arms
When adjusting the angle of inclination, loosen the screw connecting the arm with the handle slightly. After proper adjustment, tighten the screw again. If you attempt to twist a clamped holder, you can lead to the damage of the adjustment mechanism, which will result in weaker holding of the phone.
CAUTION!
DO NOT MANUALLY EXTEND THE HANDLES WITHOUT PRESSING THE HANDLE LOCK RELEASE
BUTTON FIRST. THERE IS A RISK OF DAMAGE TO THE HANDLE.
ECO-FRIENDLY AND ENVIRONMENTALLY FRIENDLY DISPOSAL
By removing waste from the product in a compliant manner, you will help to avoid possible negative impacts on the environment and human health that could occur in the result of improper handling of this waste. For further information regarding the recycling of waste from this product, please contact the municipal authorities in your area, the appropriate waste disposal service or the supplier of the product
WARRANTY CONDITIONS FOR THE CAR HOLDER
- ART-DOM Sp. z o.o. with its registered office in Łódź (92-402) at ul. Zakładowa 90/92 National Court Register Number 0000354059 (Guarantor) guarantees that the purchased device is free from physical defects. The warranty covers only defects resulting from the causes inherent in the item sold (manufac-turing defects).
- A disclosed defect will be removed at the Guarantor’s expense within 14 days from the date of reporting the damage to the authorized service or point of sale.
- In exceptional cases, e.g. the need to import spare parts from their manufacturer, the repair period may be extended up to 30 days.
- The warranty period for the user is 24 months from the date of delivery of the goods.
- The goods are intended for use only in the conditions of an individual household.
- The present warranty does not cover:
- damage caused by using the device inconsistently with the operating manual,
- mechanical, chemical or thermal damage,
- repairs and modifications made by companies or persons that were not authorized to do so by the manufacturer,
- parts that are easily worn or consumables such as: batteries, bulbs, fuses, filters, knobs, shelves, accessories,
- installation, maintenance, inspection, cleaning, unlocking, removal of contaminants and instruction.
- The Guarantor will select the mode of defect removal at its own discretion. Removal of a confirmed defect of the device will take place through warranty repair or replacement of the device. The Guarantor may perform repairs when the buyer requests replacement or the Guarantor may perform replacements when the buyer requests repair, if bringing the goods (device) into conformity in accordance with the granted warranty in the manner selected by the buyer is impossible or would require excessive costs at the part of Guarantor. In particularly justified cases, if both repair and replacement are impossible or would require excessive costs for the Guarantor, the Guarantor may refuse to bring the goods into compliance with the granted warranty and propose another way to settle the warranty claim.
- The exchange of goods is made at the point of sale at which the goods were purchased (replacement or refund) or an authorized service point, if it offers such service (replacement). The returned device must be complete, without mechanical damage. Failure to comply with these conditions may result in failure to accept the warranty claim.
- In the event of non-compliance of the goods with the sales contract, the buyer is entitled by law to legal protection measures on the part and at the expense of the seller, and the warranty does not affect these legal protection measures.
- The warranty is valid in Poland.
- The condition for the warranty repair or replacement of the device is the presentation of proof of purchase and the use of the goods in accordance with the information contained in the user manual.
CAUTION!
Damage or removal of the rating plate from the device may result in warranty
being deemed void.
We are constantly improving our products, so they may differ slightly from the
images presented on the packaging and in the user manual. Please read the user
manual before operating the appliance.
ART-DOM Sp. z o.o., ul. Zakładowa 90/92, 92-402 Łódź.
National Court Register number 0000354059.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>