2BDBE-SANWEAR Bluetooth Headphone User Manual
- June 14, 2024
- SAN
Table of Contents
2BDBE-SANWEAR Bluetooth Headphone
Product Information
Specifications
- Compliance: Part 15 of the FCC Rules
- Interference: This device may not cause harmful interference
- RF Exposure: Meets general RF exposure requirements
- Usage: Can be used in portable exposure condition without restriction
Product Usage Instructions
Safety Precautions
Before using the device, please read and follow these safety precautions:
- Keep the device away from water and other liquids.
- Avoid exposing the device to extreme temperatures.
- Do not disassemble or attempt to repair the device yourself.
- Keep the device out of reach of children.
Device Setup
To set up the device, follow these steps:
- Unbox the device and remove all packaging materials.
- Find a suitable location for the device, ensuring proper ventilation.
- Connect the device to a power source using the provided power cable.
- Power on the device by pressing the designated power button.
Operating the Device
The device operates using the following controls:
- Power Button: Press this button to turn the device on or off.
- Menu Navigation: Use the arrow buttons to navigate through menus and options.
- Select Button: Press this button to confirm selections or perform actions.
Troubleshooting
If you encounter any issues with the device, try the following troubleshooting steps:
- Check that the device is properly connected to the power source.
- Ensure that all cables are securely connected.
- Restart the device by turning it off and then on again.
- If the issue persists, refer to the user manual for further assistance.
FAQ
Q: Can I use the device while it is charging
A: Yes, you can use the device while it is charging. However, please note that charging time may be longer in this case.
Q: How do I clean the device
A: To clean the device, use a soft, dry cloth. Do not use liquid cleaners or immerse the device in water.
Q: What should I do if the device stops responding
A: If the device becomes unresponsive, try restarting it by holding down the power button for 10 seconds. If the problem persists, contact customer support for further assistance.
INSTRUCTIONS
In the realm of audio, milestones periodically redefine our very understanding and expectations.
SANWEAR represents one of these transformative moments, marking the
introduction of Hyper Reality Audio. With SANWEAR, listeners don’t merely
experience music, live concerts. or films – they are transported into a sonic
universe where every nuance and detail is magnified with unprecedented
clarity. Beyond mere immersion, it’s a journey into the very essence of sound.
This journey, however, was not forged in isolation. It was the combined
passion, vision, and dedication of many that brought SANWEAR to life. We
extend heartfelt gratitude to our •soulbound Members•. whose unwavering faith
guided our innovation. A special acknowledgment to the vanguards among ”The
33″ – Natek, Funkin Kyle. Koa. Crys, and Untamedpeppers. Their belief and
feedback have been instrumental in shaping our direction Behind the scenes,
the dedicated SAN Core Team has been the driving force, turning concept into
reality. To DL, Flu, Cromagnus, Kaku, Devin Patrick Marty, Willionaire,
Katalina. Jacob, CoffeeConverter. Chonk. and Swanny, your expertise and
commitment have been invaluable. Furthermore, our Moderation Team – Bobby,
SRLOA. Grey, Ulytra. Junior. and Chiko – plays a pivotal role in shaping and
upholding the spirit of our community.
As we present SANWEAR to the world, we acknowledge the collective effort
it represents. It’s a testament to collaboration, vision, and the endless
pursuit of excellence. To every listener embarking on this journey with SAN
WEAR, you’re not just experiencing a product but joining a shared vision of
audio’s trans formative future At SAN Sound, we’re committed to making our
technology and products accessible to everyone, everywhere. To help you get
the most out of your SANWEAR headphones, we’ve provided digital versions of
this manual in multiple languages.
To access the manual in your preferred language, simply scan the QR code
corresponding to that language using your smartphone·s camera.
At SAN Sound, we’re committed to making our technology and products
accessible to everyone, everywhere. To help you get the most out of your
SANWEAR headphones, we’ve provided digital versions of this manual in multiple
languages.
To access the manual in your preferred language, simply scan the QR code
corresponding to that language using your smartphone·s camera.
Powering
- Remove SANWEAR from the case to turn on.
- For auto shut-off, simply place them back in the case.
charging
- Connect the case to a USB power source using the included cable. Look for the indicator lights to confirm connection.
- Enjoy up to 33 hours of listening with a single charge
Pairing
- Press and hold the triangle button on the back for pairing mode.
- Running on Bluetooth 5.2 for a stable, seamless connection to your devices.
FCC
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures
-
* Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
5.19 Labelling requirements.
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF warning statement :
the device has been evaluated to meet general RF exposure requirement , The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>