THUNDERZ TZ-66 Wireless Earbuds Pro User Guide
- June 6, 2024
- THUNDERZ
Table of Contents
THUNDERZ TZ-66 Wireless Earbuds Pro
Introduction
- Touch control button
- LED indicator earbud
- Eartip
- Wingtip
- Charging contact points
- Type-C charging point
- Wireless charging base
- Charging case
- Charging station earbud
- LED indicator charging case
Connecting earbuds
Steps
- Turn on Bluetooth on your device.
- Pick up the earbuds from the charging case. The earbuds turn on, start pairing and search automatically for Bluetooth connection.
- Connect the earbuds to your device via
in the Bluetooth settings.
Note: When using the earbuds for the first time, remove the blue label from the bottom side of the earbuds.
Automatic connection:
After the earbuds are succesfully connected to your devide the first time:
- “Pick up the earbuds = automatic connection”
- “Put earbuds in charging case = earbuds disconnect”.
Touch control
Function Control
- Play/ Pause 1 x Touch L/R
- Next/ Previous song 2 x Touch for next song L 2 x Touch for previous song R
- Volume + / Volume – 3 seconds hold press volume +, L 3 seconds hold press volume -, R
- Answer/ Hang up call 1 x Touch L/ R
- Reject call 2 seconds hold press L/R
- Voice assistent activation 3 x Touch L/R
- Turn on earbud 3 seconds hold press L/R
- Turn off earbud 5 seconds hold press L/R
Tip: Either earbud can be used individually. When doing so, the functions Volume +/- and Next/ Previous song will be disabled.
LED indicator
Charging case
Status LED
- Charging via Type-C cable Red light flashes
- Fully charged via Type-C cable Red light on
- The earbuds charge in the charging case Blue light on (3 sec.), then off
- Low battery Red light flashes
Earbud
- Status LED
- Charging Red light on
- Fully charged Blue light on (5 seconden), then off
- Low battery Red light flashes
- Search connection Red and blue light flashing alternately
- Connected No light
- Music/ calling No light
- Turn on Red and blue light flashing for 2 seconds
- Turn off Red light flashes for 2 seconds
Specifications
- Bluetooth version V5.0 + EDR
- Bluetooth range 10 meters/ 33 ft (unobstructed)
- Dimensions earbud 25.2 x 23.3 x 21.9 mm
- Dimensions charging case 71.1 x 40.0 x 27.2 mm
- Weight earbud 4.5 gram/ 0.16 oz
- Charging time earbuds 1 hr
- Charging time charging case 1 hr (via Type-C)
- Standby time 60 hrs
- Battery capacity earbud 40 mAh
- Battery capacity charging case 250 mAh
- Input wireless charging base DC 5V/ 1A
Package contents
- 1 x Wireless earbud pro L/R
- 1 × Charging case
- 2 × Eartips ( S/ M/ L ), 2 x Wingtip (S/ M), 1 x Casual tip
- 1 × Type-C Charging cable
- 1 × Manual
Reset
When one or both eabuds will not connect to your device, reset the earbuds.
Steps
- Remove
from all Bluetooth devices it has been connected to, and turn off the Bluetooth on your device. - Turn off both earbuds and put them in to the charging case.
- Pick up the earbuds from the charging case and turn on the earbuds. Turn on Bluetooth on your device and connect
to your device in the Bluetooth settings. - The Bluetooth connection of the earbuds has now been reset.
Note: Always reset the 2 earbuds at the same time.
Warnings
- The earbuds cannot be submerged in water and do not withstand when used during shower or swimming.
- Do not place the earbuds in direct sunlight or in hot/ moisture places.
- Turn off the earbuds when not being used.
- Do not try to disassemble the product.
- Do not drop the earbuds or knock the earbuds to other surfaces.
- If the volume of the earbuds is too long on high volume, it may lead to health problems. Be aware.
How to wear
- Choose and place the eartip that best suit your ears.
- Insert the earbud in the inner ear.
- Turn the wingtip and find the most comfortable position.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>