dahua TiOC Jim’s Security Cameras User Guide
- June 4, 2024
- Dahua
Table of Contents
dahua TiOC Jim’s Security Cameras
TiOC HOW TO GUIDE
How to set up Face Mask Function The following guide enables you to set up the Face Mask Function on (Series 3) and (Series 5 & 7) NVR systems.
NB: The firmware version is based on the latest version when this document was created and may slightly differ from future versions, however, this will not affect any of the functionality.
Step 1: Go to AI > “PARAMETERS” > “SMART PLAN” and choose the channel you
want to run face detection on, click Face Detection to activate the function,
and then click Apply .
Step 2: Go to AI > ”PARAMETERS” > ”FACE DETECTION” and then choose Type
as “AI by Device”, Alarm Type as ”Mask Detect”, and click Enable to enable the
alarm.
Step 3 : Click “Det ect Region” and choose the region you want to detect
masks in. Then, click OK to save the target area. Other related settings can
be adjusted on the settings page. Click Apply at the bottom right corner of
the settings page to complete.
step 4 : Right-click to go back to the monitoring interface, right-click
and change “Preview Mode” to “AI Mode”, and then you will be able to see mask
detection details on the right-hand side.
Step 5: Check the alarm Click Alarm in the top right corner of the main
page, if you want to check the details of recorded alarms for different types,
click “Alarm info”, and you can see records for “Face Detection”.
TiOC HOW TO GUIDE | How to set up Face Mask
Function
When clicking each record you will be able to see full details. For example,
the following is about a mask warning:
If you still encounter problems operating your Dahua device, please call +44 (0)1628 613 500
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>