dahua ASR1101M RFID Card Reader User Manual

dahua ASR1101M RFID Card Reader User Manual

Foreword

General

This manual introduces the functions and operations of the Access Reader. Read carefully before using the device, and keep the manual safe for future reference.

Safety Instructions

The following signal words might appear in the manua

DAINGER

| Indicates a high potential hazard which, if not avoided, will result in death or serious injury.

WARNINIG

| Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury.

UTION

| Indicates a potential risk which, if not avoided, could result in property damage, data loss, reductions in performance, or unpredictable results.

TPS

| Provides methods to help you solve a problem or save time.

NOTE

| Provides additional information as a supplement to the text.

Revision History

Privacy Protection Notice

As the device user or data controller, you might collect the personal data of others such as their face, fingerprints, and license plate number. You need to be in compliance with your local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures which include but are not limited: Providing clear and visible identification to inform people of the existence of the surveillance area and provide required contact information.

About the Manual

• The manual is for reference only. Slight differences might be found between the manual and the product.
• We are not liable for losses incurred due to operating the product in ways that are not in compliance with the manual.
• The manual will be updated according to the latest laws and regulations of related jurisdictions. For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or visit our official website. The manual is for reference only. Slight differences might be found between the electronic version and the paper version.
• All designs and software are subject to change without prior written notice. Product updates might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation.
• There might be errors in the print or deviations in the description of the functions, operations and technical data. If there is any doubt or dispute, we reserve the right of final explanation.
• Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened.
•  All trademarks, registered trademarks and company names in the manual are properties of their respective owners.
• Please visit our website, contact the supplier or customer service if any problems occur while using the device.
• If there is any uncertainty or controversy, we reserve the right of final explanation.

Important Safeguards and Warnings

This section introduces content covering the proper handling of the Device, hazard prevention, and prevention of property damage. Read carefully before using the Device, and comply with
the guidelines when using it.

Transportation Requirement

Transport, use and store the Device under allowed humidity and temperature conditions.

Storage Requirement

Store the Device under allowed humidity and temperature conditions

Installation Requirements

• Do not connect the power adapter to the Device while the adapter is powered on.
• Strictly comply with the local electric safety code and standards. Make sure the ambient voltage is stable and meets the power supply requirements of the Device.
• Do not connect the Device to two or more kinds of power supplies, to avoid damage to the Device.
• Improper use of the battery might result in a fire or explosion.
• Personnel working at heights must take all necessary measures to ensure personal safety including wearing a helmet and safety belts.
• Do not place the Device in a place exposed to sunlight or near heat sources.
• Keep the Device away from dampness, dust, and soot.
• Install the Device on a stable surface to prevent it from falling.
• Install the Device in a well-ventilated place, and do not block its ventilation.
• Use an adapter or cabinet power supply provided by the manufacturer.
• Use the power cords that are recommended for the region and conform to the rated power specifications
• The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no higher than PS2. Please note that the power supply requirements are subject to the Device label.
• The Device is a class I electrical appliance. Make sure that the power supply of the Device is connected to a power socket with protective earthing.

Operation Requirements

• Check whether the power supply is correct before use.
• Do not unplug the power cord on the side of the Device while the adapter is powered on.
• Operate the Device within the rated range of power input and output.
• Use the Device under allowed humidity and temperature conditions.
• Do not drop or splash liquid onto the Device, and make sure that there is no object filled with liquid on the Device to prevent liquid from flowing into it.
• Do not disassemble the Device without professional instruction.

1 Overview

Reader, achieving video surveillance, is a complement to video monitoring, visual talk products. It has simple appearance, powerful function, and is suitable for advanced commercial building, company
property and smart community. Reader has abundant functions, including:

• Non-contact reader (read-only), within distance of 3cm~5cm, response time <0.3 s.
• Support Wiegand Protocol and RS485 protocol. RS485 baud rate is 9600bps.
• Support watch dog.
• All connection ports have over load protection.
• IP67. Outdoor installation. Work temperature: -30℃～+60℃. Work humidity: ≤95 %.
• Buzzer and indicator prompt.
• Online upgrade.
• Advanced key management system, lowering risk of data theft or intelligent card duplicate.

2 Device Structure

The device’s structure and dimension are shown in Error! Reference source not found.and Error!
Reference source not found.. Unit is mm.

3 Device Installation

Step 1. Fix rear cover’s self-tapping screw on wall.
Step 2. Hang front cover on hook on rear cover.
Step 3. Pull recessed screw throught hole at bottom, and lock front cover on rear cover.

4 System Structure

4.1 Wiring

Wiring of the device includes two groups of wires, as 8-pin and 3-pin.

Table 4-1 8-pin wires

3

|

Blue

| ALARM_OUT| Wiegand Protocol vandal proof alarm output|

Wiegand Protocol

4| White| D1| Wiegand signal 1
5| Green| D0| Wiegand signal 0
6| Brown| LED/BELL_CTRL| Wiegand swipe card signal
7| Yellow| RS485-| –| RS485

protocol

8| Purple| RS485+| –

4.2 Networking Diagram

Appendix 1 Cybersecurity Recommendations

**** Mandatory actions to be taken for basic device network security:

1. Use Strong Passwords

Please refer to the following suggestions to set passwords:
The length should not be less than 8 characters.
Include at least two types of characters; character types include upper and lower case letters, numbers and symbols.
Do not contain the account name or the account name in reverse order. Do not use continuous characters, such as 123, abc, etc.
Do not use overlapped characters, such as 111, aaa, etc.

2. Update Firmware and Client Software in Time

According to the standard procedure in Tech-industry, we recommend to keep your device (such as NVR, DVR, IP camera, etc.) firmware up-to-date to ensure the system is equipped with the latest security patches and fixes. When the device is connected to the public network, it is recommended to enable the “auto-check for updates” function to obtain timely information of firmware updates released by the manufacturer.
We suggest that you download and use the latest version of client software.

“Nice to have” recommendations to improve your device network security:

1. Physical Protection

We suggest that you perform physical protection to device, especially storage devices. For example, place the device in a special computer room and cabinet, and implement well-done access control permission and key management to prevent unauthorized personnel from carrying out physical contacts such as damaging hardware, unauthorized connection of removable device (such as USB flash disk, serial port), etc.

2. Change Passwords Regularly

We suggest that you change passwords regularly to reduce the risk of being guessed or cracked.

3. Set and Update Passwords Reset Information Timely

The device supports password reset function. Please set up related information for password reset in time, including the end user’s mailbox and password protection questions. If the information changes, please modify it in time. When setting password protection questions, it is suggested not to use those that can be easily guessed.

4. Enable Account Lock

The account lock feature is enabled by default, and we recommend you to keep it on to guarantee the account security. If an attacker attempts to log in with the wrong password several times, the corresponding account and the source IP address will be locked.

5. Change Default HTTP and Other Service Ports

We suggest you to change default HTTP and other service ports into any set of numbers between 1024–65535, reducing the risk of outsiders being able to guess which ports you are using.

6. Enable HTTPS

We suggest you to enable HTTPS, so that you visit Web service through a secure communication channel.

7. MAC Address Binding

We recommend you to bind the IP and MAC address of the gateway to the device, thus reducing the risk of ARP spoofing.

8. Assign Accounts and Privileges Reasonably

According to business and management requirements, reasonably add users and assign a minimum set of permissions to them.

9. Disable Unnecessary Services and Choose Secure Modes

If not needed, it is recommended to turn off some services such as SNMP, SMTP, UPnP, etc., to reduce risks.
If necessary, it is highly recommended that you use safe modes, including but not limited to the following services:
SNMP: Choose SNMP v3, and set up strong encryption passwords and authentication passwords.
SMTP: Choose TLS to access mailbox server. FTP: Choose SFTP, and set up strong passwords.
AP hotspot: Choose WPA2-PSK encryption mode, and set up strong passwords.

10. Audio and Video Encrypted Transmission

If your audio and video data contents are very important or sensitive, we recommend that you use encrypted transmission function, to reduce the risk of audio and video data being stolen during transmission.
Reminder: encrypted transmission will cause some loss in transmission efficiency.

11. Secure Auditing

• Check online users: we suggest that you check online users regularly to see if the device is logged in without authorization.
• Check device log: By viewing the logs, you can know the IP addresses that were used to log in to your devices and their key

12. Network Log

Due to the limited storage capacity of the device, the stored log is limited. If you need to save the log for a long time, it is recommended that you enable the network log function to ensure that the critical logs are synchronized to the network log server for tracing.

13. Construct a Safe Network Environment

In order to better ensure the safety of device and reduce potential cyber risks, we recommend:

• Disable the port mapping function of the router to avoid direct access to the intranet devices from external
• The network should be partitioned and isolated according to the actual network If there are no communication requirements between two sub networks, it is suggested to use VLAN, network GAP and other technologies to partition the network, so as to achieve the network isolation effect.
• Establish the 802.1x access authentication system to reduce the risk of unauthorized access to private networks.
• Enable IP/MAC address filtering function to limit the range of hosts allowed to access the

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>