dahua VEC0404HHM70 Video Matrix Platform User Guide

**dahua VEC0404HHM70 Video Matrix Platform

**

Overview

This document introduces hardware and quick configuration operation of Video Matrix Platform.

Model

Video Matrix Platform-4U

Safety Instructions

The following categorized signal words with defined meaning might appear in the manual.

result in death or serious injury.
WARNING| Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury.
CAUTION| Indicates a potential risk which, if not avoided, could result in property damage, data loss, lower performance, or unpredictable result.
TIPS| Provides methods to help you solve a problem or save you time.
NOTE| Provides additional information as the emphasis and supplement to the text.

Revision History

Privacy Protection Notice

As the device user or data controller, you might collect personal data of others such as face, fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be in compliance with the local privacy protection laws and regulations to protect the legitimate rights and interests of other people by implementing measures include but not limited to: providing clear and visible identification to inform data subject the existence of surveillance area and providing related contact.

About the Manual

• The manual is for reference only. If there is inconsistency between the manual and the actual product, the actual product shall prevail.

• We are not liable for any loss caused by the operations that do not comply with the manual.

• The manual would be updated according to the latest laws and regulations of related regions.
  For detailed information, see the paper manual, CD-ROM, QR code or our official website. If there is inconsistency between paper manual and the electronic version, the electronic version shall prevail.

• All the designs and software are subject to change without prior written notice. The product updates might cause some differences between the actual product and the manual. Please contact the customer service for the latest program and supplementary documentation.

• There still might be deviation in technical data, functions and operations description, or errors in print. If there is any doubt or dispute, please refer to our final explanation.

• Upgrade the reader software or try other mainstream reader software if the manual (in PDF format) cannot be opened.

• All trademarks, registered trademarks and the company names in the manual are the properties of their respective owners.

• Please visit our website, contact the supplier or customer service if there is any problem occurred when using the device.

• If there is any uncertainty or controversy, please refer to our final explanation.

Important Safeguards and Warnings

This Chapter describes the contents covering proper handling of the Device, hazard prevention, and prevention of property damage. Read these contents carefully before using the Device, comply with them when using, and keep it well for future reference.

Operation Requirement

• Do not place or install the Device in a place exposed to sunlight or near the heat source.
• Keep the Device away from dampness, dust or soot.
• Keep the Device installed horizontally on the stable place to prevent it from falling.
• Wall-mounting is not supported.
• Do not drop or splash liquid onto the Device, and make sure there is no object filled with liquid on the Device to prevent liquid from flowing into the Device.
• Install the Device in a well-ventilated place, and do not block the ventilation of the Device.
• Operate the device within the rated range of power input and output.
• Do not dismantle the Device.
• Transport, use and store the Device under the allowed humidity and temperature conditions.

Electrical Safety

• Use the battery of specified manufacturer; otherwise there might result in explosion. When replacing battery, make sure the same type is used. Improper battery use might result in fire, explosion, or inflammation.
• Follow the instructions to dispose of the used battery.
• Use the recommended power cables in the region and conform to the rated power specification.
• Use the power adapter provided with the Device; otherwise, it might result in people injury and device damage.
• The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV) standard, and supply power with rated voltage which conforms to Limited power Source requirement according to IEC60950-1. Please note that the power supply requirement is subject to the device label.
• Connect the device (I-type structure) to the power socket with protective earthing.
• The appliance coupler is a disconnection device. When using the coupler, keep the angle for easy operation.

Device Installation

Caution

For detailed requirements during installation of Video Matrix Platform, please refer to relevant state standards about engineering construction.

Inspection Steps

When receiving Video Matrix Platform, please inspect it according to the following steps.

Step 1 Inspect whether there are obvious damages on the appearance. Protective packing materials shall be able to endure most accidental impacts during transportation.

Step 2 Please open outer packing box to inspect whether accessories are complete by reference to the accessory package. After ensuring that they are correct, remove protective film from the device.

Step 3 Please open the case to inspect whether data cable, power cable, mainboard and interface board of front panel have loosened; inspect whether main control panel, control panel and function card in the case are inserted tightly.

One label at the side of the case owns serial number and other information of the device, which shall be provided when dialing after-sales calls. This label shall be protected well, and shall not be torn or discarded; otherwise, we may not be able to provide effective service.

Introduction to Complete Device

**Introduction to Front Side

**

Introduction to Reverse Side

Main Control Panel

Control Panel

Preparation of Installation Environment

As a system-level surveillance device, Video Matrix Platform is usually used in central machine room of surveillance system. Its installation site shall meet national and local machine room construction standards.

Video Matrix Platform is a standard rack-mounted device fixed in a cabinet. Please pay attention to the following points during installation and use:

• Ensure that the cabinet is sufficiently firm to support Video Matrix Platform and accessories.
  During installation, avoid dangers resulting from uneven mechanical load.

• Ensure that A/V cable owns sufficient installation space. Bending radius of cables shall not be less than 5 times as many as their outer diameter.

• Ensure well ventilation. It is suggested that its installation position shall be more than 50cm above the ground.

Power Supply Requirement

Rated voltage range: AC 100V-AC 120V, AC 200V-AC 240V, 50Hz/60Hz.

Anti-interference Requirement

• On-site power supply system shall take effective anti-interference measures.
• Working ground shall not be shared with electrical ground wire or lightning protection device, and shall keep away from them as far as possible.
• Keep away from high-power radio transmitting stations, radars and high-frequency heavy-current devices.
• When necessary, adopt electromagnetic shielding methods to resist interference.

Environmental Requirement

• Ensure that temperature in the cabinet is 0℃–50℃.
• Ensure that humidity in the machine room is 10%RH–90%RH.
• Ensure air ventilation required by safe operation of the device.

Installation Steps

Step 1 Remove interface sheath on rear panel of the case, as shown in Figure 1-5.

**NOTE

**

Please remove the black interface sheath before inserting Function Card

Step 2 Insert main control panel and control panel into slots of the case according to Figure 1-6, and tighten screws.

NOTE
When inserting main control panel and control panel, pull the extraction tool (circle position), and then insert the panel in place by pushing the extraction tool inward.
Step 3 Insert Functional Card according to actual needs. Its installation mode is the same as that of main control panel and control panel.
Step 4 Insert left and right fan boxes into corresponding positions, until the top snap joint is fixed, as shown in Figure 1-7.

Step 5 Insert power supply and fix it, as shown in Figure 1-8.

Step 6 Connect network interface 2 of main control panel and network interface of control panel with a gigabit network cable; connect network interface 1 of main control panel and client network, as shown in Figure 1-9.
To guarantee normal use, ensure that network interface 2 of main control panel and any network interface of control panel are connected with a gigabit network ca

Step 7 Ground terminal of Video Matrix Platform shall realize reliable grounding, as shown in Figure 1-10.

Caution
To guarantee personal safety and device safety, Video Matrix Platform and those devices (such as video wall and PC) connected with the platform with cables shall be grounded.

NOTE
At present, power supply of most devices can be grounded directly. In this case, their grounding terminals don’t require grounding treatment.
Step 8 Connect network cable, VGA cable and other cables according to actual needs.
Step 9 Plug in and press ON/OFF key to boot the device.

Booting/shutdown

Booting

Plug in power cable, and press power switch on front panel. Power indicator turns on and device boots up, followed by 90s booting interface.
Please pay attention to the following points during booting:

• Make sure whether the supplied voltage is within 100V-240V 47Hz-63Hz. Turn on the device after you check power cable connection.
• We recommend you to use power supply with stable voltage and little interference (refer to international standard), which help the device to work stably and prolong service life. This will also benefit external devices such as camera. UPS is the best choice if possible.

Shutdown

There are two shutdown methods:

• Method 1: Enter “Main Menu> Shut down System”, and choose “Shut down Device”.
• Method 2: Press ON button on the panel for 5s.

Caution

• Method 1 is recommended, in order to protect the device from damages due to unexpected outage.
• Stop all operations of the device, before you unplug the device from power supply

Outage Recovery

In case of outage or forced shutdown during working, after connecting power supply again, the device will automatically save and resume previous working status.

Replace Button Battery

Caution
Before replacement, please export and save configurations, or all configurations will be lost!
We recommend that the same type of battery should be used. Inspect system time regularly.
Generally speaking, battery shall be replaced once a year, to guarantee system time accuracy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>