NAKAYAMA PB900 Forest Safety Helmets Owner’s Manual
- June 4, 2024
- NAKAYAMA
Table of Contents
NAKAYAMA PB900 Forest Safety Helmets
INSTRUCTIONS
The mesh face shield are designed for face and eye protection against flying
debris while wood chopping and weed trimming. They are light by weight and
comfortable to wear. The materials used in these protectors do not contain any
substances known to cause allergic reactions. However, it may be possible for
certain susceptible individuals to develop allergies to the materials used.
WARNING: The mesh visor is intended for face protection against moderate
impact hazards but is not unbreakable. This visor does not have any filtering
action and does not protect against molten metal splash, hot solids or
electrical hazards
WARNING: this mesh visors marked S should not be used when there is a
foreseeable risk of any hard or sharp flying particles.
Applications
- Gardening
- Forestry
Standards and Approval
The Face Shield System are classed as Personal Protective Equipment (PPE) by
the European PPE new regulation,(EU) 2016/425 and have been shown to comply
with this regulation through the Harmonized European Standard EN1731:2006:
Mesh eye and face protectors
Assembly:
Assemble the face shield as the following instructions:
Stop angle adjustment
There are 4 stop positions available (as circled) to adjust the angle from the
welder’s eyes to the visor
Fitting Visor
Sliding the visor slots into the swivel posts, turning the swivel posts to
hold the visors firmly.
Rotate ratchet control knob to expand or contact band until the headgear fits your head properly, as showed below.
Use and Storage:
Temperature range for usage: -5 °C-+ 55 °C
Recommended storage conditions: -20°C -+55 °C, <85% humidity
Recommended maximum shelf life: 5 years
Cleaning, Maintenance and Disinfection:
Store this product in a soft carry bag or spectacle case when not using it.
Cleaning is recommended after each use. The product should be cleaned using a
cloth moistened with warm soapy water and dried at room temperature.
To avoid disinfection, please use medical alcohol to clear the headgear when
it was used by another end user.
WARNING: Do not use petrol, chlorinated degreasing fluids, organic
solvents or abrasive cleaning agents to clean any part of the equipment.
Use limitation
- Never modify or alter this product.
- Do not use this product against hazards other than those specified.
- Refer to the relevant user instruction for further information
- The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
- Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
- To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>