NAKAYAMA SP1000 Drill Pump User Manual

: June 3, 2024
: NAKAYAMA

Table of Contents

Safety Instructions
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SP1000 Drill Pump
User Manual

Safety Instructions

Important: Read the instructions carefully. Failure to comply with the instructions may damage the tool.
Use with any drill (1200rpm or higher).
This pump does not turn freely by hand. For best results, please follow these recommendations:

Use a 3-prong grounded cord or double insulated drill, and follow safety precautions recommended by the drill’s manufacturer.
To ensure optimum efficiency and a long-life use, it is recommended that a few drops of mineral or cooking oil be placed in the pump inlet prior to use.
Make sure that the inlet line is airtight and as short as possible and must not exceed the length of the tubing.
This product must only be used for pumping liquids with a temperature within 4-38°C (40-100°F) of the temperature range. The inlet and discharge hose will normally prevent the pump from rotating. When holding the pump by hand, hold loosely and do not move from side to side.
When pumping abrasive fluids or liquids containing solids, you can obtain a longer pump life by using a screen or strainer on the inlet line.
To prolong the pump’s life always flush with clear water after each use.
Pumping thick fluid will affect performance.

WARNING: Risk of fire. Do not pump gasoline or other highly flammable liquids. Pump depends on fluid being pumped for lubrication. Don’t use this prod-uct for pumping potable/edible liquids including water.
NOTICE: Do not run dry. If the pump fails to prime in 15-20 seconds, check that inlet line is airtight, and not kinked or clogged. Electric drills are not designed to be operated continuously and should never be left to operate unattended. This act could result in causing damage to the drill and/or pump.

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes signif-icantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

WWW.NAKAYAMATOOLS.COM
DISPOSE OF PACKAGING RESPONSIBLY
**DO NOT DISPOSE OF ELECTRICAL GOODS IN HOUSEHOLD WASTE

**